Abstract:As Cr/Fe ratio increases in Fe75.7−xCrxNi15.1Al4.6Ti4.6 (in molar ratio, x = 17.1–25.3) high‐entropy alloys (HEAs), the tensile strength rises sharply and the plasticity decreases rapidly. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of the strength (1142 MPa) and the elongation (9.5%). In the designed HEAs, second‐phase strengthening is the dominate mechanism. According to the effect of valence electron concentration (VEC) on the phase evolution of high‐entropy alloys (HEAs), Fe75.7−xCrxNi15.1Al4.6Ti4.6 (at%, x = 17.1, 18.9, 20.6, 22.3, and 25.3) HEAs are designed. Effects of the Cr addition on the microstructure and tensile properties are investigated systemically. As the Cr/Fe ratio increases (i.e., decreasing VEC), there is a phase transition from face‐centered‐cubic (FCC) to body‐centered‐cubic (BCC) and Heusler‐type β′ ‐Ni2TiAl (L21). When x is between 17.1 and 22.3, the alloys, with the mixed structure of the FCC and BCC/L21 phases, behave like composites with a sharp increase in strength but reduced ductility. When x = 25.3, the alloy, with only BCC/L21 phases, becomes extremely brittle. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of a high strength of 1142 MPa and an elongation strain of 9.5%. The excellent tensile properties of this alloy are attributed to the synergetic effects of a soft FCC phase, a hard BCC phase, and the uniform distribution of high‐density L21 nanoparticles in BCC matrix. The phase‐evolution principle is delineated by parameters of the VEC and the atomic size difference (δ), and the strengthening mechanism is well discussed. These findings offer a guidance for the development of BCC/L21‐containing HEAs for practical applications.

Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys

A second criterion for sigma phase formation in high-entropy alloys

A New Criterion for Prediction of Phase Stability in Al‐Containing High Entropy Alloys

Formation mechanisms of two types of sigma phases and the effects on mechanical behavior in a quaternary metastable high-entropy alloy

Controlled Valence Electron Concentration Approach to Tailor the Microstructure and Phase Stability of an Entropy-Enhanced AlCoCrFeNi Alloy

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Revisit the VEC rule in high entropy alloys (HEAs) with high-throughput CALPHAD approach and its applications for material design-A case study with Al–Co–Cr–Fe–Ni system

Designing High Entropy Alloys with Dual fcc and bcc Solid-Solution Phases: Structures and Mechanical Properties

Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response

Revisit the VEC Rule in High Entropy Alloys (HEAs) With High-Throughput CALPHAD Approach and Its Applications for Material Design-A Case Study With Al-Co-Cr-Fe-Ni System

Formation and Superconductivity of Single-Phase High-Entropy Alloys with a Tetragonal Structure

Microstructure and Nano-hardness of Reduced Activation FeCrV-Based High Entropy Alloys with Abundant Ti Addition

Revisit the VEC criterion in high entropy alloys (HEAs) with high-throughput ab initio calculations: A case study with Al-Co-Cr-Fe-Ni system

Twin boundary-assisted precipitation of sigma phase in a high-entropy alloy

Method to identify the phase structures of high entropy alloys with modified lattice distortion enthalpy

Lattice distortion and atomic ordering of the sigma precipitates in CoCrFeNiMo high-entropy alloy

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Influence of V and Al in Enhancing the Strength and Ductility of Co-rich High-Entropy Alloys

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

Effects of Cr/Fe Ratio on Structural Evolution and Tensile Properties of the Fe75.7−xCrxNi15.1Al4.6Ti4.6 High‐Entropy Alloys

Laves-phase formation criterion for high-entropy alloys