Abstract:The use of soft robotic actuators is on the rise because these soft systems offer the advantage of being highly flexible, which affords safer robot-environment interactions and the gentleness necessary to handle delicate objects. However, this advantage becomes a shortcoming in high-force applications where flexible components fold and fail under large loads. Various methods were sought to meet this challenge by providing a level of rigidity to soft components, but previously proposed solutions bring their own drawbacks including bulky systems, addition of superfluous weight, and restriction of actuator motion. Alternatively, this article presents Tubular Jamming, a new and effective means of stiffening that is adaptable to motion, lightweight, and can be implemented with minimal equipment. In this study, the mechanism of tubular jamming is expounded and is demonstrated through two exemplary soft structures: a tubular jammed beam (TJB) and a tubular jammed hinge (TJH). Both TJB and TJH are exhibited in areas of fabrication, characterization, and a few possible examples of implementation in soft robotic systems. In the TJB structure, tubular jamming is found to increase bending stiffness by nearly threefold at the maximum pressure and packing ratio tested, compared with a traditional soft pneumatic actuator (SPA) beam. The TJB is shown to require less supply pressure to achieve the same performance as a traditional SPA and is shown to perform better in maintaining the vertical position of a borne object. A triangular support configuration made from TJBs is demonstrated to be proficient in weight bearing, supporting a load of nearly 33 times its own weight. In the TJH structure, tubular jamming is shown to have a compound effect on torque output, as three jammed tubule hinges produce approximately four times the torque of a single tubule hinge. The TJH is exhibited in a wearable elbow flexion device. Tubular jamming opens new possibilities for soft components to achieve the stiffness needed to perform high-force tasks such as weight bearing and large-scale actuation while retaining the suppleness to enable a safe robot-to-environment interface.

The Chain-Link Actuator: Exploiting the Bending Stiffness of McKibben Artificial Muscles to Achieve Larger Contraction Ratios

Control of Antagonistic McKibben Muscles Via a Bio-inspired Approach

Earthworm‐Inspired Multi‐Material, Adaptive Strain‐Limiting, Hybrid Actuators for Soft Robots

Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators

Controllable Stiffness Origami “skeletons” for Lightweight and Multifunctional Artificial Muscles

Fast, variable stiffness-induced braided coiled artificial muscles

Fluid-driven origami-inspired artificial muscles

Development and Control of Smart Pneumatic Mckibben Muscles for Soft Robots

Pennate actuators: force, contraction and stiffness

Stretchable Electrohydraulic Artificial Muscle for Full Motion Ranges in Musculoskeletal Antagonistic Joints

Development of Cultured Muscles with Tendon Structures for Modular Bio-Actuators

A Torsion-Bending Antagonistic Bistable Actuator Enables Untethered Crawling and Swimming of Miniature Robots

A Variable Stiffness Soft Actuator with a Center Skeleton and Pin-Socket Jamming Layers

Knotted Artificial Muscles for Bio‐mimetic Actuation under Deepwater

Stiffness-Tuneable Limb Segment with Flexible Spine for Malleable Robots

Miniaturized and untethered McKibben muscles based on photothermal-induced gas-liquid transformation

Tubular Jamming: A Variable Stiffening Method Toward High-Force Applications with Soft Robotic Components

Electrically-Driven Soft Fluidic Actuators Combining Stretchable Pumps With Thin McKibben Muscles

Bioinspired actuators with intrinsic muscle-like mechanical properties

Compliant actuators that mimic biological muscle performance with applications in a highly biomimetic robotic arm

Twisting and Braiding Fluid-Driven Soft Artificial Muscle Fibers for Robotic Applications