Abstract:Friction or lubrication process is a typical process of the energy dissipation. It can be reasonably described and speculated by using the entropy increase and dissipative structure theory of the non-equilibrium thermodynamics. In this paper, we model and analyze the typical thin-film lubrication mechanism based on the theory of thermodynamics, by using the interfacial disjoining pressure to characterize the dominant role of the solid-lubricant interaction on a microscale and establishing the lubrication Stribeck curve based on thermodynamic concepts. The concept of entropy production is adopted to describe the lubrication system, which is defined as the sum of multiplications of the thermodynamic forces and flows. Then the variations and the competing relations between the pairs of thermodynamic forces and flows could be used to reveal the different factors dominated in the lubrication system, such as the solid-liquid interaction, the sliding velocity, and the normal load. In this paper, we assume that all the dissipated energy caused by the viscous resistance of lubricant is converted into heat, then the total entropy increase per surface area at the frictional interface is considered, affected by interfacial disjoining pressure and the one-dimensional heat flow. With the entropy increasing analysis of lubrication process, we find that when the entropy production in the steady state becomes minimum, the total energy dissipation due to friction also becomes minimum, which directly indicates the lowest friction coefficient point at the lubrication Stribeck curve. Moreover, when a lubrication system loses its stability slightly from the equilibrium state, self-organization may occur at the solid-lubricant interface, thus resulting in partially ordering interfacial structures, which may indicate the interfacial structures when tribosystem turns from hydrodynamic lubrication phase into thin-film lubrication phase. In the experimental aspect, the location of the lowest friction coefficient point at the Stribeck curve has a very good correspondence to the minimum entropy point predicted by our thermodynamic model, and the lubrication transition process from hydrodynamic phase to thin-film phase can be explained quite well by the theory of dissipative structures when the system loses its stability. Furthermore, a calculation model of the friction coefficient for thin-film lubrication is obtained when considering the dominant contribution of the solid-lubricant interfacial interaction through an equivalent force method. The calculation data correspond well to the experimental results. In summary, thermodynamic model could effectively characterize the lubrication process in mechanism by revealing the involved multi-scale effect, multi-physical effect and nonlinear coupling effect.

Space-Time Region of Propagation of Heat Flux Through a Lubricated Contact with Account for the Heat-Shielding Effect of Oil Films

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

ASSESSMENT OF THE INFLUENCE OF THE HEAT SHIELDING EFFECT OF OILS ON THE POSSIBILITY OF JAMMING IN THE MOBILE INTERFACES OF TRANSPORT VEHICLES

Experimental Investigation of Lubrication Oil Film Dynamics in a Typical Aero-Engine Bearing Chamber Environment

The Research on Critical Temperature Property of Boundary Film of Lubricating Oil

Effect of Microcontent of Oil in Water under Confined Condition

The Effect of Energy Accumulation and Boundary Slip on Laminar Flow Between Rotating Plates

Three dimensional heat transfer temperature distribution of thrust bearing

Experimental Investigation of Lubrication Properties at High Contact Pressure

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

Experimental Investigation of Lubrication Film Starvation of Polyalphaolefin Oil at High Speeds

An Experimental-Study on Oil-Supply in A Space Bearing with an Oil-Impregnated Retainer

Time Effect on Lubricant Film

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage

Influence of temperature correlations on phase dynamics and kinetics of ultrathin lubricant film

Transient mixed-lubrication and contact behavior analysis of metal liquid film under magneto-thermal effect

Thermodynamic Analysis of Lubrication Considering Solid-Liquid Interface Interaction

Experimental and Numerical Simulation of Heat Transfer in an Impact Synthetic Jet

Numerical Modeling of Non-Isothermal Laminar Flow and Heat Transfer of Paraffinic Oil with Yield Stress in a Pipe

Prediction on Flow and Thermal Characteristics of Ultrathin Lubricant Film of Hydrodynamic Journal Bearing

Enhancing heat transport in multiphase Rayleigh–Bénard turbulence by changing the plate–liquid contact angles