Abstract:The aim of this study was to evaluate the use of high-resolution airborne laser scanner (ALS) data to detect and measure individual trees. We developed and tested a new mixed pixel- and region-based algorithm (using Definiens Developer 7.0) for locating individual tree positions and estimating their total heights. We computed a canopy height model (CHM) of pixel size 0.25 m from dense first-pulse point data (8 pulses m−2) acquired with a small-footprint discrete-return lidar sensor. We validated the results of individual tree segmentation with accurate field measurements made in 37 plots of Monterey pine (Pinus radiata D. Don) distributed over an area of 36 km2. Fieldwork consisted of labelling all of the trees in each plot and measuring their height and position, for posterior integration of the data from both sources (field and lidar). The proposed algorithm correctly detected and linked 59.8% of the trees in the 37 sample plots. We also manually located the trees by using FUSION software to visualize the raw lidar data cloud. However, because the latter method is extremely time-consuming, we only considered 10 randomly selected plots. Manual location correctly detected and linked 71.9% of the trees (in this subsample the algorithm correctly detected and measured 63.5% of the trees). The R2 values for the linear model relating field- and lidar-measured heights of the linked trees located manually and with the automatic location algorithm were 0.90 and 0.88, respectively.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to use high - resolution airborne laser scanning (ALS) data to detect and measure the position and height of individual trees. Specifically, the researchers developed and tested a new hybrid pixel - area algorithm for locating individual tree crowns and estimating their total heights. This method aims to improve the accuracy of individual tree detection in Pinus radiata D. Don (radiata pine) plantations, thereby providing a more accurate method for forest resource assessment. ### Research Background Traditional forest survey methods usually obtain detailed measurement data through sample plots and then average these data to produce basic management variables per hectare and their standard errors. However, this method is costly and time - consuming, especially on small - area private lands, which may contain different types of forests. In addition, it is difficult for traditional methods to achieve full coverage of large - area ground, or it may take several years to complete the survey. ### Solution To overcome the above problems, the researchers utilized airborne laser scanning technology (ALS), which can provide detailed three - dimensional information about forest canopy size and structure. The new algorithm proposed in this paper combines the advantages of both pixel and area methods. By processing the data of small - footprint discrete - return airborne LiDAR systems, it realizes the location of individual tree positions and the estimation of their heights. ### Specific Methods 1. **Data Collection**: The research area is located in Galicia in the northwest of Spain, with a total area of 36 square kilometers. The researchers used the Optech ALTM 3025 system to collect LiDAR data and carried out field measurements in 37 plots of 225 square meters, recording the position, diameter, and height of each tree. 2. **Model Generation**: By processing LiDAR data, digital terrain models (DEM), digital surface models (DSM), and canopy height models (CHM) were generated. 3. **Algorithm Design**: - **CHM Smoothing**: Use a Gaussian filter to reduce noise and smooth the CHM image. - **Segmentation**: Use the chessboard segmentation algorithm to segment the image into square objects. - **Classification**: Classify objects with a height less than 1.5 meters as "voids" and the remaining objects as "temporary canopies". - **Iterative Process**: Detect tree tops through a six - step iterative process, with the search range gradually decreasing in each iteration. - **Crown Division**: Use the watershed segmentation algorithm to divide tree crowns and trim unnatural crown shapes by morphological algorithms. - **Export Results**: Finally, generate the "good canopy" class and the "tree top" class, which represent the boundary of each individual tree crown and the position of the tree top respectively. ### Result Verification The researchers verified the accuracy of the algorithm by comparing it with field measurement data. The results show that the automatic location algorithm correctly detected and linked 59.8% of the trees, while the manual location method correctly detected and linked 71.9% of the trees. The correlation coefficients of the linear models are 0.90 and 0.88 respectively, indicating that the algorithm has high precision. ### Conclusion This study successfully developed a new hybrid pixel - area algorithm, which can effectively detect and measure the position and height of individual trees using high - resolution airborne laser scanning data. This method provides a new tool for efficient management and assessment of forest resources.

A mixed pixel- and region-based approach for using airborne laser scanning data for individual tree crown delineation in Pinus radiata D. Don plantations

Comparison of ALS- and UAV(SfM)-derived high-density point clouds for individual tree detection in Eucalyptus plantations

Benchmarking of Individual Tree Segmentation Methods in Mediterranean Forest Based on Point Clouds from Unmanned Aerial Vehicle Imagery and Low-Density Airborne Laser Scanning

Crown-Level Structure and Fuel Load Characterization from Airborne and Terrestrial Laser Scanning in a Longleaf Pine (Pinus palustris Mill.) Forest Ecosystem

Individual Tree Crown Segmentation in Two-Layered Dense Mixed Forests from UAV LiDAR Data

Estimating potential tree height in Pinus radiata plantations using airborne laser scanning data

Individual Tree Detection and Crown Segmentation Based on Metabolic Theory from Airborne Laser Scanning Data

Use of a Consumer-Grade UAV Laser Scanner to Identify Trees and Estimate Key Tree Attributes across a Point Density Range

Crown segmentation using Airborne Laser Scanning data in a silvopastoral system with Eucalyptus grandis

A New Method for Segmenting Individual Trees from the Lidar Point Cloud

Automatic estimation of olive tree dendrometric parameters based on airborne laser scanning data using alpha-shape and principal component analysis

Integrating terrestrial and airborne laser scanning for the assessment of single-tree attributes in Mediterranean forest stands

Delineating Individual Trees From Lidar Data: A Comparison Of Vector- And Raster-Based Segmentation Approaches

Delineation of individual deciduous trees in plantations with low-density LiDAR data

Site Index Estimation Using Airborne Laser Scanner Data in Eucalyptus dunnii Maide Stands in Uruguay

Simple method for direct crown base height estimation of individual conifer trees using airborne LiDAR data.

Forest Inventory with Long Range and High-Speed Personal Laser Scanning (PLS) and Simultaneous Localization and Mapping (SLAM) Technology

Measurement and calculation of crown projection area and crown volume of individual trees based on 3D laser-scanned point-cloud data

FULLY AUTOMATED GIS-BASED INDIVIDUAL TREE CROWN DELINEATION BASED ON CURVATURE VALUES FROM A LIDAR DERIVED CANOPY HEIGHT MODEL IN A CONIFEROUS PLANTATION

Evaluation of UAS LiDAR data for tree segmentation and diameter estimation in boreal forests using trunk- and crown-based methods