Abstract:As one of the three fastest-growing tree species in the world, eucalyptus grows rapidly, with a monthly growth rate of up to 1 m and a maximum annual growth rate of up to 10 m. Therefore, ways to accurately and quickly obtain the aboveground biomass (AGB) of eucalyptus in different growth stages at a low cost are the foundation of achieving eucalyptus growth-change monitoring and precise management. Although Light Detection and Ranging (LiDAR) can achieve high-accuracy estimations of individual eucalyptus tree biomasses, the cost of data acquisition is relatively high. While the AGB estimation accuracy of high-resolution images may be affected by a lack of forest vertical structural information, stereo images obtained using unmanned aerial vehicles (UAVs) can not only provide horizontal structural information but also vertical structural information through derived point data, demonstrating strong application potential in estimating the biomass of eucalyptus plantations. To explore the potential of UAV stereo images for estimating the AGB of individual eucalyptus trees and further investigate the impact of stereo-image-derived features on the construction of biomass models, in this study, UAVs equipped with consumer-grade cameras were used to obtain multitemporal stereo images. Different features, such as spectral features, texture, tree height, and crown area, were extracted to estimate the AGB of individual eucalyptus trees of five different ages with three algorithms. The different features extracted based on the UAV images had different effects on estimating AGB in individual eucalyptus trees. By estimating eucalyptus AGB using only spectrum features, we found that tree height had the greatest impact, with its R2 value increasing by 0.28, followed by forest age. Other features, such as spectrum, texture, and crown area, had relatively small effects. For the three algorithms, the estimation accuracy of the CatBoost algorithm was the highest, with an R2 ranging from 0.65 to 0.90, and the normalized root-mean-square error (NRMSE) ranged from 0.08 to 0.15. This was followed by the random forest algorithm. The ridge regression algorithm had the lowest accuracy, with an R2 ranging from 0.34 to 0.82 and an NRMSE value ranging from 0.11 to 0.21. The AGB model that we established with forest age, TH, crown area, and HOM-B feature variables using the CatBoost algorithm had the best estimation accuracy, with an R2 of 0.90 and an NRMSE of 0.08. The results indicated that accurately estimating the AGB of individual eucalyptus trees can be achieved based on stereo images obtained using UAVs equipped with affordable, consumer-grade cameras. This paper can provide methodological references and technical support for estimating forest biomass, carbon storage, and other structural parameters based on UAV images.

Comparison of ALS- and UAV(SfM)-derived high-density point clouds for individual tree detection in Eucalyptus plantations

Assessment of Forest Structure Using Two UAV Techniques: A Comparison of Airborne Laser Scanning and Structure from Motion (SfM) Point Clouds

Determining tree height and crown diameter from high-resolution UAV imagery

Individual Tree Detection from Unmanned Aerial Vehicle (UAV) Derived Canopy Height Model in an Open Canopy Mixed Conifer Forest

Integrating UAV-SfM and Airborne Lidar Point Cloud Data to Plantation Forest Feature Extraction

Use of a Consumer-Grade UAV Laser Scanner to Identify Trees and Estimate Key Tree Attributes across a Point Density Range

A Novel Tree Height Extraction Approach For Individual Trees By Combining Tls And Uav Image-Based Point Cloud Integration

Individual Tree Crown Segmentation in Two-Layered Dense Mixed Forests from UAV LiDAR Data

Cross-Comparison of Individual Tree Detection Methods Using Low and High Pulse Density Airborne Laser Scanning Data

Benchmarking of Individual Tree Segmentation Methods in Mediterranean Forest Based on Point Clouds from Unmanned Aerial Vehicle Imagery and Low-Density Airborne Laser Scanning

A Comparative Study to Evaluate Accuracy on Canopy Height and Density Using UAV, ALS, and Fieldwork

Estimating Stem Volume in Eucalyptus Plantations Using Airborne LiDAR: A Comparison of Area- and Individual Tree-Based Approaches

Individual Tree Aboveground Biomass Estimation Based on UAV Stereo Images in A Eucalyptus Plantation

Comparison of UAV photograph-based and airborne lidar-based point clouds over forest from a forestry application perspective

Examination of Drone Usage in Estimating Hardwood Plantations Structural Metrics

UAV leaf-on, leaf-off and ALS-aided tree height: A case study on the trees in the vicinity of roads

Extraction of Forest Structural Parameters by the Comparison of Structure from Motion (SfM) and Backpack Laser Scanning (BLS) Point Clouds

Comparing RIEGL RiCOPTER UAV LiDAR Derived Canopy Height and DBH with Terrestrial LiDAR

Very High Density Point Clouds from UAV Laser Scanning for Automatic Tree Stem Detection and Direct Diameter Measurement

Assessing the attributes of high-density Eucalyptus globulus stands using airborne laser scanner data

Accuracy of a LiDAR-Based Individual Tree Detection and Attribute Measurement Algorithm Developed to Inform Forest Products Supply Chain and Resource Management