Abstract:The use of recycled brick aggregates (RBAs) in concrete could provide sustainable solution in construction industry by reducing the consumption of natural resources and protecting the environment by saving landfill sites. However, the use of RBAs is uncommon due to limited available research studies investigating its mechanical and durability behavior, especially the freeze-thaw (FT) behavior. Despite a few studies on FT resistance of RBA concrete (RBAC), the FT deterioration mechanism in RBAC is not fully understood, particularly at the microscale. This lack of understanding hinders the widespread adoption of RBAC in sustainable construction practices, particularly in cold regions. Therefore, this study investigates the FT deterioration mechanism in RBAC using macro and microscale experiments and proposes a Weibull damage model to accurately describe the damage variation in RBAC. RBAC specimens with different water-cement (w/c) ratios of 0.65, 0.5 and 0.35 and RBA replacement levels of 0%, 25%, 50% and 100% were produced and tested under rapid FT cycles. Surface scaling, mass loss, relative dynamic modulus of elasticity, and compressive strength reduction were evaluated. X-ray computed tomography (XCT) was used to characterize pore structure and microcracking alterations during FT cycles. The results showed that the deterioration of RBAC increased with the increase in RBA replacement level. XCT revealed increased porosity and microcracking within the RBA particles, which was linked to the significant damage observed in RBAC compared to reference concrete. Quantitative analysis of pore size distribution before and after FT cycling revealed a substantial increase in small pores (<1 mm3) in RBAC. The proposed Weibull distribution damage model accurately described the damage variation in RBAC with different w/c ratios. This study provides new insights into multiscale FT deterioration mechanisms affecting RBAC, aiding in optimizing RBAC mix designs to balance sustainability and durability.

Removing attached mortar from recycled aggregate by the combined freeze–thaw cycles and high‐temperature drying

RBSM-based Mesoscale Study of Frost Deterioration for Recycled Concrete Considering Air-Entrainment in Old and New Mortar

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

A Complete Thermo-Poromechanical Model for Freeze-Thaw Modification of Recycled Coarse Aggregate Considering Deterioration of Each Component

Improved freeze-thaw modification of recycled concrete aggregate originally from frost resistive concrete

Frost Resistance of Recycled Aggregate Concrete: A Critical Review

A Recycling Approach of Natural Stone from Crushed Concrete Based on Freeze-Thaw Modification and Usage of Spalling Mortar As Recycled Fine Aggregate

Effects of pretreated recycled fine aggregates on the mechanical properties and microstructure of alkali-activated mortar

Coupled Effects of the Freeze-Thaw Cycles and Salt Erosion on the Performance of Recycled Aggregate Concrete

Performance Evolution of Recycled Aggregate Concrete under the Coupled Effect of Freeze-Thaw Cycles and Sulfate Attack

Freezing and Thawing Resistance of Fine Recycled Concrete Aggregate (FRCA) Mixtures Designed with Distinct Techniques

Mechanical Properties and Early-Age Shrinkage of Ultra-High Performance Concrete Mortar with Recycled Fine Aggregate

Using recycled aggregate and powder from high-strength mortar waste for durable cement-based materials: Microstructure and chloride transport

Review on physical performance, modification mechanisms, carbon emissions and economic costs of recycled aggregates modified with physical enhancement technologies

Enhancing quality and strength of recycled coarse and fine aggregates through high-temperature and ball milling treatments: mechanisms and cost-effective solutions

Transport properties and freeze-thaw resistance of mortar mixtures containing recycled concrete and glass aggregates

Recycling of the end-of-life lightweight aggregate concrete (LWAC) with a novel approach

The Rejuvenating Effect in Hot Asphalt Recycling by Mortar Transfer Ratio and Image Analysis

Durability of Recycled Concrete after Reinforcing the Aggregates with Permeable Crystalline Materials

Quantitative assessment and mechanism analysis of modification approaches for cold recycled mixtures with asphalt emulsion

Improving the salt frost resistance of recycled aggregate concrete modified by air-entraining agents and nano-silica under sustained compressive loading