Abstract:Biomass pyrolysis is typically modeled based on the three reference components cellulose, hemicellulose, and lignin. Most models rely on an individual decomposition of the materials and a linear superposition of the individual component products weighted by the present mass fractions. Models of varying complexity exist for the mathematical description of the pyrolysis process, ranging from the simplest single first-order (SFOR) model and the multi-step CRECK model to the chemical percolation devolatilization (CPD) model representing the molecular network of the solid. The models differ not only in their complexity but also in the used data for initial parameter calibration — thermogravimetric analysis (TGA) data for the CRECK model and mainly entrained flow, fluidized bed, or wire mesh reactor data for the Bio-CPD model. Within the present study, the predictive performance of these three models is compared with regard to the time-dependent total volatile release and the final volatile yield when applying two different thermal boundary conditions: low heating rate in a TGA and flash pyrolysis conditions realized with a small-scale fluidized bed reactor (FBR). The models are compared with one other and with experimental data on extracted, separately pyrolyzed biomass components to examine under which conditions reliable predictions can be made and when the trustability is limited. For the TGA data, the CRECK model has the closest proximity to the experimental measurements, also resolving most of the individual reactions, while the SFOR model can resolve only one globally dominating reaction, and the Bio-CPD model strongly overpredicts the reactivity of the biomass components during the slow heat-up. Under flash pyrolysis conditions in the FBR, by contrast, the Bio-CPD model predictions are closest to the experimental results when it comes to predicting the total volatile release rate. However, examining the integrally released yields, the CRECK model is closer to the experiments. Regarding the tar and light gas distribution, all models strongly overpredict tar from primary pyrolysis compared to the experimental results, indicating the presence of secondary gas-phase reactions in the FBR. Although different secondary gas-phase reaction models are used, the tar yield is significantly overestimated by the models compared to the experimental data.

Multistep Kinetic Model of Biomass Pyrolysis

Two-Stage Global Biomass Pyrolysis Model for Combustion Applications: Predicting Product Composition with a Focus on Kinetics, Energy, and Mass Balances Consistency

Kinetic Modelling of Biomass Pyrolysis Processes

Cellulose pyrolysis kinetic model: Detailed description of volatile species

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Analysis of Pyrolysis Kinetic Parameters Based on Various Mathematical Models for More than Twenty Different Biomasses: A Review

Modelling intra-particle phenomena of biomass pyrolysis

Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle

Comparative analysis of pyrolysis models including SFOR, CRECK, and Bio-CPD to predict reaction kinetics and products from extracted biomass components

Kinetic Modeling of Biomass Components Pyrolysis Using a Sequential and Coupling Method

Kinetic Study on Pyrolysis of Biomass Components: A Critical Review

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Lignocellulosic Biomass Pyrolysis Mechanism: A State-of-the-art Review

Kinetics Study on Biomass Pyrolysis for Fuel Gas Production

Multiscale CFD Modeling of High-Temperature Biomass Pyrolysis with an Intraparticle Particle Model and Detailed Pyrolysis Kinetics

Development and Comparison of Thermodynamic Equilibrium and Kinetic Approaches for Biomass Pyrolysis Modeling

APPLICATIO STUDY ON KINETICS OF BIOMASS PYROLYSIS IN THE FIXED BED. 1. SIMULATION AND NUMERICAL ANALYSIS OF LIGNIN THERMAL DECOMPOSITION

Insight into kinetic and Thermodynamic Analysis methods for lignocellulosic biomass pyrolysis

Pyrolysis Simulation of Thermally Thick Biomass Particles Based on a Multistep Kinetic Scheme

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Kinetic reaction mechanism of lignocellulosic biomass oxidative pyrolysis based on combined kinetics