Abstract:A rotor system supported by active magnetic bearings (AMBs) is actually a second-order dynamical system, whose dynamical characteristics should be considered in the design process of the controller. The relationships between the dynamical parameters and the control parameters can be established by the eigenstructure assignment. Output feedback dynamical compensators (OFDCs) are proposed based on the eigenstructure assignment for an AMBs-rigid rotor system in this article. First, the model of the four-degree-of-freedom AMBs-rigid rotor system was established, and it was decoupled into two single-degree-of-freedom (S-DOF) translational sub-systems and two S-DOF rotational sub- systems through the modal decoupling method. Aiming to the control of the four S-DOF systems, the relationships among the parameters of the OFDCs, the eigenvalues, and the eigenvectors were derived based on the eigenstructure assignment. Then, a multiobjective optimization problem was constructed in which the system stability, the robustness to the bias current perturbation, and the maximum amplitudes of the unbalance displacement and control current were considered. Several Pareto solutions were obtained through NSGA-II, and different solutions were selected to compare the performance of the corresponding systems. The simulation and experimental results verify the effectiveness of the proposed OFDCs and the rationality of the proposed design process.

Modeling and control of magnetic flexible rotor bearing system

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Sliding Mode Control Based on Linear Quadratic Regulator for an Active Magnetic Bearing Flexible Rotor Virtual Collocated System

The sliding variable structure control of mixed magnetic bearing system

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Active Control of Active Magnetic Bearings for Maglev Flywheel Rotor System Based on Sliding Mode Control

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Active Vibration Control of a Non-collocated AMBs Flexible Rotor System to Pass the First Bending Critical Speed

Internal model control for the AMB high-speed flywheel rotor system based on modal separation and inverse system method

Decoupling Control for Active Magnetic Bearing High-speed Flywheel Rotor Based on Mode Separation and State Feedback

Stability of Active Magnetic Bearing Flexible Rotor System under Base Swing Condition

Implicit Generalized Predictive Control of an Active Magnetic Bearing System

Stable Control of Nutation and Precession for the Radial Four-Degree-of-Freedom AMB-Rotor System Considering Strong Gyroscopic Effects

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

Vibration Control of Base-Excited Rotors Supported by Active Magnetic Bearing Using a Model-Based Compensation Method

Study on Inverter-fed Three-pole Active Magnetic Bearing