Abstract:Metal matrix composites reinforced with discontinuous reinforcement (short fiber, whisker or particle) are attractive for applications requiring higher stiffness and strength than traditional alloys. Unlike continuously reinforced composites, where the properties are mainly influenced by fibers, the properties of the discontinuously reinforced composites seem to be influenced more by matrix properties. Most of the discontinuously reinforced composites are based on age-hardenable light alloys, so that aging treatments can be applied to develop the optimum properties of the composites. The aging behavior of discontinuously reinforced composites has been a subject of great interest both from scientific and technological view points. Recently developed NZ30K (Mg-3wt.%Nd-0.5wt.%Zn-0.5wt.%Zr) alloys exhibit higher specific strength at both room and elevated temperatures, better strength and creep resistance than the existing commercial magnesium alloys. Accordingly, this alloy can be considered as a candidate material for potential automobile applications, such as engine blocks and pistons, which experience high service temperature. Its use could save considerable mass weight in powertrain systems. However, low elastic modulus and wear resistance of magnesium alloys limit their widespread applications. Metal matrix composites have been proposed as the feasible and economical solution. The aim of this study is to investigate the effect of alumina fibers on the aging hardening kinetics and age-hardening efficiency of squeeze cast NZ30K/Saffil/15p magnesium matrix composite. The aging behavior has been examined using Vickers, combined with microstructure observation developed during heat treatment by optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Effects of Aging Treatment on Laser-Welded Mg-Rare Earth Alloy NZ30K

Effects of Heat Treatments on Laser Welded Mg-rare Earth Alloy NZ30K

Effects of Heat Treatments on the Microstructures and Mechanical Properties of Mg–3Nd–0.2Zn–0.4Zr (wt.%) Alloy

Effects of Aging Treatment on the High-Temperature Mechanical Behavior of Laser-Welded High-Strength Mg-Gd-Y Alloy

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Microstructure and Mechanical Properties of the Laser-Welded Mg-3nd-0.2zn-0.4zr (nz30k) Magnesium Alloy

Effects of Grain Size and Heat Treatment on the Tensile Properties of Mg–3Nd–0.2Zn (wt%) Magnesium Alloys

Effect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium Alloy

Effect of aging treatment on phase evolution and mechanical properties of selective laser melted Al-Mg-Er-Zr alloy

Superstrengthening Effect of Beyond-Solid-Solution Laser Powder Bed Fused We43 Magnesium Alloy Triggered by Direct Aging Treatment

Effects of Ageing Treatment on Microstructures and Properties of Mg–Gd–Y–Zr Alloys with and Without Zn Additions

Microstructure and Mechanical properties of Extruded Mg-3Nd-0.2Zn-0.4Zr (wt. %) Alloy

Effect of Aging Treatment on Tensile Behaviors of Cast Mg-9Gd-4Y-0.5Zr Alloy

Effect of Heat Treatment on Corrosion and Electrochemical Behaviour of Mg–3Nd–0.2Zn–0.4Zr (wt.%) Alloy

Microstructure Evolution in the Fusion Zone of Laser-Welded Mg–Gd–Y–Zr Alloy During Solution and Aging Treatment

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy During Aging Treatment

Effect of Aging Temperature on Microstructure and Mechanical Properties of Mg-12Gd-3Y-1Sm-0.5Zr Alloy

Research on Laser Welding of Mg-Rare Earth Alloy Mg-3Nd-0.2Zn-0.4Zr

Mechanical Properties, Aging Behavior and Microstructure Evolution of Mg-Nd-Zn-Zr Based Magnesium Matrix Composite Reinforced with Alumina Fibers

Effect of Aging Treatment on the Microstructure, Fracture Toughness and Fracture Behavior of the Extruded Mg-7Gd-2Y–1Zn-0.5Zr Alloy

The Influence of Heat and Cryogenic Treatment on Microstructure Evolution and Mechanical Properties of Laser-Welded AZ31B