Abstract:In this work, we present a one-pot synthesis route to prepare a new composite materials of iron (α-Fe) and a metal–organic framework (MOF) of iron, the MIL-100(Fe), using the sonochemical process. The experimental setup consists of applying high-power ultrasonic pulses to a water-dimethylformamide (H 2 O-DMF) (1:1) solution containing iron powder, 1,3,5-benzenetricarboxylic acid (H 3 BTC), and nitrate (NO 3− ). X-ray diffractions and the FT-IR measurements confirm that MIL-100(Fe) was obtained and the difference parameter Δ between the asymmetric and symmetric infrared mode of the order of 250 cm −1 is an indication that the carboxyl oxygen is coordinated through an unidentate interaction with iron Fe(III) in the MOF structure, also the presence of α-iron(Fe 0 ) in the composite was confirmed by the appearance of the diffraction peak at 44.7°. Scanning electron microscopy showed a rod-like morphology for the MIL-100(Fe) and the magnetization measurements suggest a ferromagnetic behavior with maximum magnetization ( M S ) varying as a function of synthesis parameter Fe 0 , H 3 BTC, and nitrate ratio. Higher and lower M S , of 12.52 emu.g −1 and 0.34 emu.g −1 , were obtained for Fe 0 :H 3 BTC:HNO 3 ratio of 3:1:3.5 and 1:1:3.5, respectively. The largest and smallest Brunauer–Emmett–Teller surface areas of 1490.2 m 2 .g −1 and 666.4 m 2 .g −1 were obtained for the Fe 0 :H 3 BTC:HNO 3 ratio of 1:1:3.5 and Fe 0 :H 3 BTC:NaNO 3 of 1:1:20, respectively. Decomposition of nitrate anion, and DMF, under ultrasound producing perhydroxyl radicals, HO 2 •, and hydrogen peroxide (H 2 O 2 ) and hydrogen (H 2 ) has been used to explain the mechanism for the α-Fe@MOF-100(Fe) magnetic composites preparation.

Synthesis of MIL-100(Fe) at Low Temperature and Atmospheric Pressure

Facile Conversion of Hydroxy Double Salts to Metal-Organic Frameworks Using Metal Oxide Particles and Atomic Layer Deposition Thin-Film Templates

Synthesis of Metal Organic Framework Material MIL-101

Synthesis of Metal–organic Framework MIL-101 in TMAOH-Cr(NO3)3-H2BDC-H2O and Its Hydrogen-Storage Behavior

Experimental investigations into the irregular synthesis of iron(iii) terephthalate metal-organic frameworks MOF-235 and MIL-101

Facile synthesis of Fe-based metal-organic frameworks from Fe2O3 nanoparticles and their application for CO2/N2 separation

Effect of H2O/DMF Mixed Solvents on Formation of MIL-100(Fe) and Dye Adsorption

Synthesis and hydrogen-storage behavior of metal–organic framework MOF-5

Efficient lithium extraction from aqueous solutions by MIL-100(Fe): A study on adsorption kinetics, thermodynamics and mechanism

α-Fe@MIL-100(Fe) composites obtained by one-pot sonochemical synthesis

Room temperature synthesis of monolithic MIL-100(Fe) in aqueous solution for energy-efficient removal and recovery of aromatic volatile organic compounds

Green synthesis of a large series of bimetallic MIL-100(Fe,M) MOFs

Solvent-Free Synthesis of MIL-101(Cr) for CO2 Gas Adsorption: The Effect of Metal Precursor and Molar Ratio

Synthesis, Morphology Control, and Properties of Porous Metal–organic Coordination Polymers

Synthesis Methods and Influencing Factors of Metal Organic Framework Material MIL-53

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

Synthesis of Fe–MOF/COF Hybrid Materials for Methane Adsorption Using Design of Experiments

Experimental investigation on water vapor adsorption performance of solvent-free synthesized MIL-100(Fe) and its composite adsorbent

Phase-Selective Microwave Assisted Synthesis of Iron(III) Aminoterephthalate MOFs

One-pot Synthesis of MIL-101-NH2(Cr) Derivatives Using GdmCl As a Mediator for Enhanced Low CO2 Concentration Capture

Direct Imaging of Tunable Crystal Surface Structures of MOF MIL-101 Using High-Resolution Electron Microscopy