Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Significant Improvement of Mechanical Properties for Polyvinyl Alcohol Film Prepared from Freeze/Thaw Cycled Gel

Effects of Crystallization Temperature of Poly(vinylidene Fluoride) on Crystal Modification and Phase Transition of Poly(butylene Adipate) in Their Blends: a Novel Approach for Polymorphic Control.

A Study on the Relationship Between the Crystal Structure and Hard Elasticity of PVDF Fibers

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Enhanced Mechanical Properties of PVA Hydrogel by Low-Temperature Segment Self-Assembly vs. Freeze–Thaw Cycles

Highly Oriented Thermoplastic Poly (vinyl alcohol) Films by Uniaxial Drawing: Effect of Stretching Temperature and Draw Ratio

Thermal Behavior of Poly(vinyl alcohol) in the Form of Physically Crosslinked Film

Structure-property correlation of polyvinyl alcohol films fabricated by different processing methods

Structure and Morphology of Freeze/Thawed PVA Hydrogels

Suppression of the Skin-Core Structure of Poly(vinyl Alcohol) Films by Adding Urea/Diethanolamine to Improve the Mechanical and Optical Properties

Polyglycerol‐modified polyvinyl alcohol with improved stability during thermoplastic processing

Enhancement of Mechanical Properties of Benign Polyvinyl Alcohol/Agar Hydrogel by Crosslinking Tannic Acid and Applying Multiple Freeze/Thaw Cycles

CP/MAS 13C NMR Analysis of the Structure and Hydrogen Bonding of Melt-Crystallized Poly(vinyl Alcohol) Films

Supercooling and Solvent Depletion-Driven Poly(vinyl Alcohol) Film Formation Mechanism As Elucidated by in Situ Synchrotron Radiation X-Ray Scattering

Change in the Morphology and Properties of Poly(vinyl alcohol) Cryogels Depending on the Annealing Temperature

Freeze/thawed polyvinyl alcohol hydrogels: Present, past and future

Optimization of crosslinked poly(vinyl alcohol) nanocomposite films for mechanical properties

Properties of hydrogels synthesized by freezing and thawing aqueous polyvinyl alcohol solutions and their applications

Properties and toughening mechanisms of PVA/PAM double-network hydrogels prepared by freeze-thawing and anneal-swelling

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

H-PVA Cross-Linking Mechanism Prepared By Freeze-Thaw And Annealing: Optimizing Gel Fraction And Swelling