Abstract:Poly(phenylene sulfide) (PPS) with different crosslinking levels was successfully fabricated by means of high-temperature isothermal treatment (IT). The crosslinking degree of PPS was increased with IT time as revealed by Fourier-transform infrared spectroscopy and dynamic viscosity measurements. Its influence on the non-isothermal crystallization behaviors of PPS was studied by differential scanning calorimeter (DSC). The crystallization peak temperature of PPS with 6 h IT was 15 K higher than that of the one with 2 h IT at 30 K/min cooling rate. The non-isothermal crystallization data were also analyzed based on the Ozawa model. The Ozawa exponent m decreased from 3.5 to 2.2 at 232°C with the increase of the IT time, suggestive of intensive thermal oxidative crosslinking reducing the crystallite dimension as PPS crystal grew. The reduced cooling crystallization function K(T) was indicative of the larger activation energy of crosslinked PPS chain diffusion into crystal lattice, resulting in a slow crystal growth rate. Additionally, the overall crystallization rate of PPS was also accelerated with the increase of crosslinking degree from the observation of polarized optical micrograph. These results indicated that the chemical crosslinked points and network structures formed during the high-temperature isothermal treatment acted as the effective nucleating sites, which greatly promoted the crystallization process of PPS and changed the type of nucleation and the geometry of crystal growth accordingly.

Characterization of Crystallinity and Orientation in Poly-p-Phenylene Sulfide

Molecular Evolution Mechanism of Flow-Induced Crystallization in Polyphenylene Sulfide

The Glass Transition Temperature of Poly(Phenylene Sulfide) with Various Crystallinities

Anisotropic Optical Constants Of In-Plane Oriented Polyfluorene Thin Films On Rubbed Substrate

Molecular Packing and Orientation Transition of Crystalline Poly( 2,5-Dihexyloxy-p-phenylene)

Evaluation of the Equilibrium Melting Temperature and Melting Behavior of Poly(Phenylene Sulfide) Crystals.

Effect of the Contribution of Crystalline and Amorphous Phase on Tensile Behavior of Poly (phenylene Sulfide)

Influence Of Thermal Cross-Linking Temperature On The Crystallization Behavior Of Poly(Phenylene Sulfide)

In-Plane Uniaxial Strain in Black Phosphorus Enables the Identification of Crystalline Orientation.

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. 2. Molecular Orientation During Necking Process of Isotactic Polypropylene

The Crystallization of Poly (3-Dodecylthiophene) in an Oriented Solidification Environment

Synchrotron Investigation on Mesomorphic Structure of S PP and Poly(ethylene- Co -Octene) in Their Initial Crystallization Stage

Crystallization Segregation Dsc Studies of Pp/Pe Copolymers

Cold-Crystallisation of Polyphenylene Sulphide, Studied by Measuring the Electrical Resistance of a Carbon-Fibre Polyphenylene-Sulphide-Matrix Composite

Non-isothermal crystalliztion kinetics of poly(phenylene sulfide) with low crosslinking levels

Crystallization Behevior of Poly(3-Dodecylthiophene)

A Study on Crystalline Structure and Morphology for Polypropylene Catalloys

Mechanical property characterization of partially crystalline Poly-Ether-Ether-Ketone

In Situ Ftir Spectroscopic Study of the Conformational Change of Isotactic Polypropylene During the Crystallization Process

Crystallinity and Crystallographic Texture in Isotactic Polypropylene during Deformation and Heating