Abstract:A voltammetric approach was developed for the selective and sensitive determination of hydrogen peroxide using Au plated porous silicon (PSi) nanopowder modified glassy carbon electrode (GCE). The AuNPs-PSi hybrid structure was synthesized via stain etching procedure followed by an immersion plating method to deposit AuNPs onto PSi via a simple galvanic displacement reaction with no external reducing agent to convert Au3+ to Au0. The as-fabricated AuNPs-PSi catalyst was successfully characterized by XRD, Raman, FTIR, XPS, SEM, TEM and EDS techniques. Well crystalline nature of the as-fabricated hybrid structure with AuNPs size ranging from 5 to 40 nm was observed. The specific surface area and total pore volume for both PSi and AuNPs plated PSi were evaluated using N2 adsorption isotherm technique. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the catalytic efficiency of AuNPs-PSi modified electrode compared to pure PSi/GCE and unmodified GCE. The sensing performance of the active material modified GCE was thoroughly examined with linear sweep voltammetry (LSV) and square wave voltammetry (SWV) techniques. The AuNPs-PSi/GCE exhibited a remarkable linear dynamic range between 2.0 and 13.81 mM (for LSV) and 0.5-6.91 mM for (SWV) with high sensitivity and low detection limit of 10.65 μAmM-1cm-2 and 14.84 μM for LSV, whereas 10.41 μAmM-1cm-2 and 15.16 μM using SWV techniques, respectively. The fabricated sensor electrode showed excellent anti-interfering ability in the presence of several common biomolecules as well as demonstrated good operational stability and reproducibility with low relative standard deviation. Moreover, the modified electrode showed acceptable recovery of H2O2 in a real sample analysis. Thus, the developed AuNPs-PSi hybrid nanomaterial represents an excellent electrocatalyst for the efficient detection and quantification of H2O2 by the electrochemical approach.

Synergetic effect of Prussian blue film with gold nanoparticle graphite–wax composite electrode for the enzyme-free ultrasensitive hydrogen peroxide sensor

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Improvement of Selectivity and Stability of Amperometric Detection of Hydrogen Peroxide Using Prussian Blue‐PAMAM Supramolecular Complex Membrane As a Catalytic Layer

Hydrogen Peroxide Sensor Based on Prussian Blue Electrodeposited on (3-Mercaptopropyl)-trimethoxysilane Polymer-Modified Gold Electrode

Prussian blue@Au nanoparticles/SiO2 cavity/ITO electrodes: Application as hydrogen peroxide sensor

Hydrogen Peroxide Biosensor Modified By Prussian Blue And Derivative Of 3,4,9,10-Perylenetetracarboxylic Dianhydride

Amperometric hydrogen peroxide biosensor based on the immobilization of HRP on nano-Au/Thi/poly (p-aminobenzene sulfonic acid)-modified glassy carbon electrode.

Screen Printed Biosensor for Hydrogen Peroxide Based on Prussian Blue Modified Hydroxyapatite

Prussian blue @ platinum nanoparticles/graphite felt nanocomposite electrodes: application as hydrogen peroxide sensor.

High-Linearity Hydrogen Peroxide Sensor Based on Nanoporous Gold Electrode

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/L-cysteine/gold colloid/nanoparticles Pt-chitosan composite film-modified platinum disk electrode.

Hydrogen Peroxide Sensor Based on Electrodeposited Prussian Blue Film

Prussian Blue Modified Submicron Structured Gold Electrodes for Amperometric Hydrogen Peroxide Sensing

Synthesis, characterization, and electrochemical sensor application of Prussian blue nanocubes/Au nanocomposite for hydrogen peroxide sensing

Electrochemical detection of hydrogen peroxide based on silver nanoparticles via amplified electron transfer process

Gold nanoparticles plated porous silicon nanopowder for nonenzymatic voltammetric detection of hydrogen peroxide

Ultrasonic Electrodeposition of Gold−Platinum Alloy Nanoparticles on Ionic Liquid−Chitosan Composite Film and Their Application in Fabricating Nonenzyme Hydrogen Peroxide Sensors

A New Amperometric Biosensor for Hydrogen Peroxide Determination Based on HRP-nanogold-PTH-nanogold-modified Carbon Paste Electrodes

A Novel Enzyme-Free Hydrogen Peroxide Sensor Based on Electrode Modified with Gold Nanoparticles-Overoxidized Polydopamine Composites

Electrochemical Determination Of Hydrogen Peroxide Using A Novel Prussian Blue-Polythiophene-Graphene Oxide Membrane-Modified Glassy Carbon Electrode

Amperometric Biosensor for Hydrogen Peroxide Based on Horseradish Peroxidase Onto Gold Nanowires and TiO2 Nanoparticles