Abstract:High-efficiency silicon solar cells rely on some form of passivating contact structure to reduce recombination losses at the crystalline silicon surface and losses at the metal/Si contact interface. One such structure is polycrystalline silicon (poly-Si) on oxide, where heavily doped poly-Si is deposited on a SiOx layer grown directly on the crystalline silicon (c-Si) wafer. Depending on the thickness of the SiOx layer, the charge carriers can cross this layer by tunneling (<2 nm SiOx thickness) or by direct conduction through disruptions in the SiOx, often referred to as pinholes, in thicker SiOx layers (>2 nm). In this work, we study structures with tunneling- or pinhole-like SiOx contacts grown on pyramidally textured c-Si wafers and expose variations in the SiOx layer properties related to surface morphology using electron-beam-induced current (EBIC) imaging. Using EBIC, we identify and mark regions with potential pinholes in the SiOx layer. We further perform high-resolution transmission electron microscopy on the same areas, thus allowing us to directly correlate locally enhanced carrier collection with variations in the structure of the SiOx layer. Our results show that the pinholes in the SiOx layer preferentially form in different locations based on the annealing conditions used to form the device. With greater understanding of these processes and by controlling the surface texture geometry, there is potential to control the size and spatial distribution of oxide disruptions in silicon solar cells with poly-Si on oxide-type contacts; usually, this is a random phenomenon on polished or planar surfaces. Such control will enable us to consistently produce high-efficiency devices with low recombination currents and low junction resistances using this contact structure.

A new bioinspired pit texture to enhance the light-coupling efficiency of silicon solar cells

Embedded Surface Relief Gratings by a Simple Method to Improve Absorption and Electrical Properties of Polymer Solar Cells.

Quasi-hemispherical pit array textured surface for increasing the efficiency of thin-film solar cells

Self-Cleaning Antireflective Coating with A Hierarchical Texture for Light Trapping in Micromorph Solar Cells

Inverted Pyramid Morphology Control by Acid Modification and Application for PERC Solar Cells

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Optimization-based Design of Surface Textures for Thin-Film Si Solar Cells.

The Devisable Reflection-Enhanced Lumpy Silver Particle and Its Application in Thin Film Amorphous Silicon Solar Cell

Angle-dependent Photocurrent Response of Pyramid-Textured Silicon

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon‐Surface Texture on Perovskite Properties

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Micro-textures for Efficient Light Trapping and Improved Electrical Performance in Thin-Film Nanocrystalline Silicon Solar Cells

Effect of Surface Texture on Pinhole Formation in SiO x-Based Passivated Contacts for High-Performance Silicon Solar Cells

Chain pyramid texturization for better light trapping and efficiency of silicon solar cells

Performance Enhancement in A-Si:H/μc-si:h Tandem Solar Cells with Periodic Microstructured Surfaces.

An Artificial-Intelligence-Assisted Investigation on the Potential of Black Silicon Nanotextures for Silicon Solar Cells

Light Scattering Enhancement by Double Scattering Technique for Multijunction Thin-Film Silicon Solar Cells

Simulation Study on Improving Efficiencies of Perovskite Solar Cell: Introducing Nano Textures on It

Light Trapping in Micromorph Cell by Imprinting Self-Cleaning Dual-Scale Textured Coating

Hierarchical robust textured structures for large scale self-cleaning black silicon solar cells

Optical Absorption Enhancement in NH2CH=NH2PbI3 Lead Halide Perovskite Solar Cells with Nanotextures