Abstract:In this work, a nanoporous array anodic titanium was selected as a fiber substrate because of its high surface-to-volume ratio, easy preparation, mechanical stability, and rich titanol groups on its surface that can anchor other active groups. Then, a polymerizable ionic liquid monomer pair, (1-vinyl-3-hexadecylimidzolium)-(p-styrenesulfonate) ([C(16)VIm]+SS-), was synthesized and used for the chemical modification of the mercaptopropyl-functionalized nanoporous anodic titania support using a surface radical chain-transfer addition. A homogeneous and porous coating with a thickness of about 7 mu m was achieved. The main advantage of this copolymerization method over the conventional single-ion polymerization is its high stability under harsh conditions, like high temperatures, as well as acidic, alkaline and high ionic strength solutions. Combined with gas chromatography-a flame ionization detection (GC-FID), the poly[C(16)VIm]+SS- was used as a sorbent material for the direct immersion SPME of four types of compounds, including polycyclic aromatic hydrocarbons, hydrophobic phenols, nonvolatile phthalate esters and parabens, in an aqueous solution. The analytical performance of the proposed method was investigated under the optimum extraction conditions (content of NaCl, 20% (w/v); extraction temperature, 70 degrees C; and extraction time, 55 min). Calibration ranges were 0.1-400 mu g L-1 for four hydrophobic phenols, anthracene (Ant) and fluoranthene (Flt), 0.15-600 mu g L-1 for dibutyl phthalate (DBP) and di-(2-ethyl-hexyl) phthalate (DEHP), and 0.5-2000 mu g L-1 for ethylparaben (EPN) and propylparaben (PPN). The as-established method showed good linearity with good correlation coefficients (R = 0.993-0.999) and low detection limits in the range of 0.003 to 0.156 ng mL(-1) (S/N = 3). In addition, the poly[C(16)VIm]+SS- -SPME fiber showed good precision (3.2-13.5%) and repeatability between fiber and fiber (9.1-19.6%). Finally, soil extract sample were analyzed and satisfactory results were obtained.

Electrochemical synthesis and characterization of solid-phase microextraction fibers using conductive polymers: application in extraction of benzaldehyde from aqueous solution

Electroless deposition of silver nanofractals on copper wire by galvanic displacement as a simple technique for preparation of porous solid-phase microextraction fibers

Electrodeposited Polyaniline As A Fiber Coating for Solid-Phase Microextraction of Organochlorine Pesticides from Water

Polyaniline-Based Fiber for Headspace Solid-Phase Microextraction of Substituted Benzenes Determination in Aqueous Samples

Carbon nanotube-based benzyl polymethacrylate composite monolith as a solid phase extraction adsorbent and a stationary phase material for simultaneous extraction and analysis of polycyclic aromatic hydrocarbon in water

Preparation of Nanoporous Array Anodic Titanium Wire Supported Solid-Phase Microextraction Fiber Coated with A Copolymerized Polymerizable Ionic Liquid Monomer Pair

Ultrasonic assisted synthesis of a novel ternary nanocomposite based on carbon nanotubes/zeolitic imidazolate framework-67/polyaniline for solid-phase microextraction of organic pollutants

Microextraction of Polycyclic Aromatic Hydrocarbons by Using a Stainless Steel Fiber Coated with Nanoparticles Made from a Porous Aromatic Framework.

Polypyrrole/graphene composite-coated fiber for the solid-phase microextraction of phenols.

Electrospun Polymer Nanofibers As A Solid-Phase Extraction Sorbent for the Determination of Trace Pollutants in Environmental Water

Oxidized multiwalled carbon nanotubes as a novel solid-phase microextraction fiber for determination of phenols in aqueous samples.

Solid-phase Microextraction Based on Polyaniline Doped with Perfluorooctanesulfonic Acid Coupled to HPLC for the Quantitative Determination of Chlorophenols in Water Samples.

Preparation Of Solid-Phase Microextraction Fiber Coated With Single-Walled Carbon Nanotubes By Electrophoretic Deposition And Its Application In Extracting Phenols From Aqueous Samples

Electropolymerized multiwalled carbon nanotubes/polypyrrole fiber for solid-phase microextraction and its applications in the determination of pyrethroids.

Fabrication of a Polymeric Composite Incorporating Metal-Organic Framework Nanosheets for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons from Water Samples.

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

Graphene-based Metal and Nitrogen-Doped Carbon Composites As Adsorbents for Highly Sensitive Solid Phase Microextraction of Polycyclic Aromatic Hydrocarbons.

A novel sol-gel-based amino-functionalized fiber for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

Electrochemical In Situ Fabrication of Titanium Dioxide Nanotubes on a Titanium Wire as a Fiber Coating for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Polypyrrole hollow fiber for solid phase extraction.

Introduction of commercial heating elements of resistance metal alloys as the novel solid-phase microextraction fibers for chromatographic monitoring of organic pollutants