Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

Experimental determination of the complex stiffness tensor and Euler angles in anisotropic media using ultrasonic waves

Ultrasonic and structural characterization of anisotropic austenitic stainless steel welds: Towards a higher reliability in ultrasonic non-destructive testing

Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

Effective grain orientation mapping of complex and locally anisotropic media for improved imaging in ultrasonic non-destructive testing

On the Identification of Orthotropic Elastic Stiffness Using 3D Guided Wavefield Data

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

Experimental full waveform inversion for elastic material characterization with accurate transducer modeling

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Unravelling anisotropic nonlinear shear elasticity in muscles: Towards a non-invasive assessment of stress in living organisms

Estimating Young's moduli based on ultrasound and full-waveform inversion

Identification of viscoelastic material properties by ultrasonic angular measurements in double through-transmission

Evaluation non destructive des matériaux par ultrasons : caractérisation de l'état initial et suivi sous charge des propriétés d'élasticité linéaire et non linéaire d'alliages d'aluminium

Off-epicentral measurement of laser-ultrasonic shear-wave velocity and its application to elastic-moduli evaluation

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

High-resolution Lamb waves dispersion curves estimation and elastic property inversion

Ultrasonic and FEM residual stress measurement in dissimilar St37–St52 welding

A time-domain spectral finite element method for acoustoelasticity: Modeling the effect of mechanical loading on guided wave propagation

3D Hybrid Modeling for the Ultrasonic Phased Array Inspection of Porosity in Heavy Plates: Simulation and Experimental Validation

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Resonant ultrasound spectroscopy applications: Elastic moduli computation with x-ray computed tomography input for irregularly shaped objects

On the elastic-wave imaging and characterization of fractures with specific stiffness