Abstract:The basic principle of ultrasound is to relate the time of flight of a received echo to the location of a reflector, assuming a known and constant velocity of sound. This assumption breaks down in austenitic welds, in which a microstructure with large oriented austenitic grains induces local velocity differences resulting in deviations of the ultrasonic beam. The inspection problem is further complicated by scattering at grain boundaries, which introduces structural noise and attenuation. Embedding material information into imaging algorithms usually improves image quality and aids interpretation. Imaging algorithms can take the weld structure into account if it is known. The usual way to obtain such information is by metallurgical analysis of slices of a representative mock-up fabricated using the same materials and welding procedures as in the actual component. A non-destructive alternative to predict the weld structure is based on the record of the welding procedure, using either phenomenological models or the finite element method. The latter requires detailed modelling of the welding process to capture the weld pool and the microstructure formation. Several parameters are at play, and uncertainties intrinsically affect the process owing to the limited information available. This paper reports a case study aiming to determine the most critical parameters and levels of complexity of the weld formation models from the perspective of ultrasonic imaging. By combining state-of-the-art welding simulation with time-domain finite element prediction of ultrasound in complex welds, we assess the impact of the modelling choices on the offset and spatial spreading of defect signatures. The novelty of this work is in linking welding simulation with ultrasonic imaging and quantifying the effect of the common assumptions in solidification modelling from the non-destructive examination perspective. Both aspects have not been explored in the literature to date since solidification modelling has not been used to support ultrasonic inspection extensively. The results suggest that capturing electrode tilt, welding power, and weld path correctly is less significant. Bead shape was identified as having the greatest influence on delay laws used to compute ultrasonic images. Most importantly, we show that neglecting mechanical deformation in FE, allowing for simpler thermal simulation supplemented with a phenomenological grain growth loop, does not reduce the quality of the images considerably. Our results offer a pragmatic balance between the complexity of the model and the quality of ultrasonic images and suggest a perspective on how weld formation modelling may serve inspections and guide pragmatic implementation.

Ultrasonic and structural characterization of anisotropic austenitic stainless steel welds: Towards a higher reliability in ultrasonic non-destructive testing

Measurement of ultrasonic scattering attenuation in austenitic stainless steel welds: realistic input data for NDT numerical modeling

Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

Modelling the attenuation in the ATHENA finite elements code for the ultrasonic testing of austenitic stainless steel welds

Application of advanced ultrasonic testing methods to Dissimilar Metal Welds -- Comparison of simulated and experimental results

Experimental determination of the complex stiffness tensor and Euler angles in anisotropic media using ultrasonic waves

Supporting Imaging of Austenitic Welds with Finite Element Welding Simulation—Which Parameters Matter?

Ultrasonic Total Focusing Imaging of Defects in Anisotropic Austenitic Stainless Steel Weld

Effective grain orientation mapping of complex and locally anisotropic media for improved imaging in ultrasonic non-destructive testing

Ultrasonic Time-of-Flight Diffraction Testing with Linear Frequency Modulated Excitation for Austenitic Stainless Steel Welds

Ultrasonic Beam Simulation and Flaw Signal Prediction in Anisotropic Buttering Weldment

Ultrasonic signal simulation for thick-walled welds based on ray-tracing algorithm and ultrasonic field calculation

Design and Application of Partial Immersion Focused Ultrasonic Transducers for Austenitic Weld Inspection

Assessment of Weld Microstructure Through Sound Velocity Measurements for Power Plant Applications

Efficient testing of weld seam models with radii of curvature in the millimeter range using laser ultrasound

Micromechanical Study of Heterogenous Deformation of Austenitic Stainless Steel Welded Joints at Different Temperatures

Analysis of the Suitability of Ultrasonic Testing for Verification of Nonuniform Welded Joints of Austenitic–Ferritic Sheets

Microstructure quantification and phased array ultrasonic inspection of GH3535 alloy weld

Experimental Study of Nondestructive Microstructural Characterization of Friction Stir Welded Joints

Application of Linear Frequency Modulated Excitation on Ultrasonic Testing for Austenitic Stainless Steel Welds

Locating flaws in anisotropic and inhomogeneous weldments using ray tracing method