Abstract:A zwitterionic polymer, poly(3-(methacryloylamino) propyl-dimethyl-(3-sulfopropyl) ammonium hydroxide) (poly(MPDSAH)) was successfully grafted in high density from the surface of poly(vinylidene fluoride) (PVDF) hollow fiber membrane via a two-step polymerization. Poly(2-hydroxyethyl methacrylate) (poly(HEMA)) chains were firstly grafted from outside surface of PVDF membrane through atom transfer radical polymerization (ATRP) to provide the initiation sites for subsequent cerium (Ce (IV))-induced graft copolymerization of polyMPDSAH in the presence of N,N′-ethylene bisacrylamide (EBAA) as a cross-linking agent. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) confirmed that the EBAA could stimulate zwitterionic polymers grafting onto the membrane surface. The dense poly(MPDSAH) layers on the PVDF membrane surface were revealed by the scanning electron microscope (SEM). The mechanical property of PVDF membrane was improved by the zwitterionic surface layers. The gravimetry results indicated the grafting amount increased to 520μg/cm2 for a copolymerization time of more than 3h. Static and dynamic water contact angle measurements showed that the surface hydrophilicity of the PVDF membranes was significantly enhanced. As the grafting amount reached 513μgcm−2, the value of contact angle dropped to 22.1° and the amount of protein adsorption decreased to zero. The cyclic experiments for BSA solution filtration demonstrated that the extent of protein fouling was significantly reduced and most of the fouling was reversible. The grafted polymer layer on the PVDF membrane showed a good stability during the membrane cleaning process. The experimental results concluded a good prospect in obtaining the sulfobetaine-modified PVDF membranes with high mechanical strength, good anti-protein-fouling performance, and long-term stability via the two-step polymerization.

Preparation of a PVDF hollow fiber blend membrane via thermally induced phase separation (TIPS) method using new synthesized zwitterionic copolymer

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Porous PVDF membranes containing amphiphilic comblike polysiloxane formed via phase inversion process

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Study of PVDF porous membranes blending with organic-inorganic hybrid nanoparticles via surface zwitterionicalization

Synthesis of Well-Defined PVDF-Based Amphiphilic Block Copolymer via Iodine Transfer Polymerization for Antifouling Membrane Application

Preparation of Symmetric Network PVDF Membranes for Protein Adsorption Via Vapor-Induced Phase Separation

Simple and Effective Preparation of Zwitterionic Anti‐Fouling Poly(vinylidene fluoride) Ultrafiltration Membrane by In Situ Cross‐Linking Polymerization Technology

PVDF hollow fiber formation via modified NIPS method: Evolution elucidation of phase separation mechanism, structure and properties of membrane with coagulation strength varied

Preparation Of Sulfobetaine-Grafted Pvdf Hollow Fiber Membranes With A Stably Anti-Protein-Fouling Performance

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Development of low-fouling PVDF membranes blended with poly(2-methoxyethyl acrylate) via NIPS process

Poly(vinylidene Difluoride)/poly(tetrafluoroethylene-Co-vinylpyrrolidone) Blend Membranes with Antifouling Properties.

Green thermally induced phase separation (TIPS) process for braided tube reinforced polyvinylidene fluoride (PVDF) hollow fiber composite membranes with favorable bonding layer

A novel method to immobilize zwitterionic copolymers onto PVDF hollow fiber membrane surface to obtain antifouling membranes

Blending Polyvinylidene Difluoride with Copolymers of Carboxymethyl Betaine and Methyl Methacrylate to Develop Low-Fouling Microfiltration Membranes Via Non-Solvent Induced Phase Separation

Simulated preparation and hydration property of a new-generation zwitterionic modified PVDF membrane

The Effect of Diluent Mixture with Upper Critical Solution Temperature on Membrane Formation Process, Microstructure, and Performance of PVDF Hollow Fiber Membrane by TIPS Process

Preparation of hydrophilic and fouling resistant poly(vinylidene fluoride) hollow fiber membranes

Zwitterionic Sulfobetaine-Grafted Poly(vinylidene Fluoride) Membrane Surface with Stably Anti-Protein-fouling Performance Via a Two-Step Surface Polymerization