Abstract:Mapping trace gas emission plumes using in situ measurements from unmanned aerial vehicles (UAVs) is an emerging and attractive possibility to quantify emissions from localized sources. Here, we present the results of an extensive controlled-release experiment in Dübendorf, Switzerland, which was conducted to develop an optimal quantification method and to determine the related uncertainties under various environmental and sampling conditions. Atmospheric methane mole fractions were simultaneously measured using a miniaturized fast-response quantum cascade laser absorption spectrometer (QCLAS) and an active AirCore system mounted on a commercial UAV. Emission fluxes were estimated using a mass-balance method by flying the UAV-based system through a vertical cross-section downwind of the point source perpendicular to the main wind direction at multiple altitudes. A refined kriging framework, called cluster-based kriging, was developed to spatially map individual methane measurement points into the whole measurement plane, while taking into account the different spatial scales between background and enhanced methane values in the plume. We found that the new kriging framework resulted in better quantification compared to ordinary kriging. The average bias of the estimated emissions was −1 %, and the average residual of individual errors was 54 %. A Direct comparison of QCLAS and AirCore measurements shows that AirCore measurements are smoothed by 20 s and had an average time lag of 7 s. AirCore measurements also stretch linearly with time at an average rate of 0.06 s for every second of QCLAS measurement. Applying these corrections to the AirCore measurements and successively calculating an emission estimate shows an enhancement of the accuracy by 3 % as compared to its uncorrected counterpart. Optimal plume sampling, including the downwind measurement distance, depends on wind and turbulence conditions, and it is furthermore limited by numerous parameters such as the maximum flight time and the measurement accuracy. Under favourable measurement conditions, emissions could be quantified with an uncertainty of 30 %. Uncertainties increase when wind speeds are below 2.3 m s−1 and directional variability is above 33∘, and when the downwind distance is above 75 m. In addition, the flux estimates were also compared to estimates from the well-established OTM-33A method involving stationary measurements. A good agreement was found, both approaches being close to the true release and uncertainties of both methods usually capturing the true release.

Comparative study to evaluate three ground-based optical remote sensing techniques under field conditions by a gas tracer experiment

Emission Determination by Three Remote Sensing Methods in Two Release Trials

Challenges associated with the atmospheric monitoring of areal emission sources and the need for optical remote sensing techniques—an open-path Fourier transform infrared (OP-FTIR) spectroscopy experience report

Methodological Comparison between a Novel Automatic Sampling System for Gas Chromatography versus Photoacoustic Spectroscopy for Measuring Greenhouse Gas Emissions under Field Conditions

Standards VDI 4211 and VDI 4212 on passive FTIR and DOAS remote sensing techniques

Near Real-Time Ground-to-Ground Infrared Remote-Sensing Combination and Inexpensive Visible Camera Observations Applied to Tomographic Stack Emission Measurements

Optical remote sensing to quantify fugitive particulate mass emissions from stationary short-term and mobile continuous sources: part I. Method and examples

Design study for an airborne N2O lidar

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum]

Continuous regional trace gas source attribution using a field-deployed dual frequency comb spectrometer

Real-World Application of Open-Path UV-DOAS, TDL, and FT-IR Spectroscopy for Air Quality Monitoring at Industrial Facilities

Quantifying methane emission from fugitive sources by combining tracer release and downwind measurements - a sensitivity analysis based on multiple field surveys

Integrated-path multi-gas sensor using near-infrared diode lasers: an alternative to vehicle-driven point gas analyzer

Open-path Dual-comb Spectroscopy for Multispecies Trace Gas Detection in the 4.5 μm to 5 μm Spectral Region

Three-dimensional radiative transfer effects on airborne and ground-based trace gas remote sensing

High Repetition Rate Mid-Infrared Differential Absorption Lidar for Atmospheric Pollution Detection

Aircraft-Based AirCore Sampling for Estimates of N<sub>2</sub>O and CH<sub>4</sub> Emissions

Vertical Distribution Mapping for Methane Fugitive Emissions Using Laser Path-Integral Sensing in Non-Cooperative Open Paths

Investigating differences in DOAS retrieval codes using MAD-CAT campaign data

Demonstration of Spatial Greenhouse Gas Mapping Using Laser Absorption Spectrometers on Local Scales

Controlled-release Experiment to Investigate Uncertainties in UAV-based Emission Quantification for Methane Point Sources