Abstract:Enormous assistance is required during rehabilitation activities, which might result in a variety of complications if performed manually. To solve this issue, several solutions in the form of assistive devices have been presented recently. Another issue highlighted is the lack of kinematic compatibility in low degrees-of-freedom (dof) systems. The proposed approach of developing a human-motion-oriented rehabilitation device deals with the problem through hybrid architectures. A novel modular synthesis approach is used for the purpose to induce generality in the design process. Using a modular strategy, three planar hybrid configurations are generated for two-dof mechanisms for supporting flexion/extension motion. Three such architectures are optimally synthesised and kinematically analysed over the entire workspace. A Genetic Algorithm (GA) is used to synthesise the architecture parameters optimally. Moreover, the outcomes are evaluated against a set of seven poses and posture locations of the wrist to choose the most suitable configuration among the others. Subsequently, kinematic compatibility is analysed for the coupled system – formed by the selected architecture and the human arm – while wearing the proposed mechanism. According to the findings of optimal synthesis, workspace and singularity analysis, configuration-III is capable of achieving the optimal postures for all task space locations (TSLs). Further, the work modifies the design by attaching additional three revolute passive joints for correcting misalignment concerns using coupled mobility analysis. The modular strategy for hybrid architectures and the subsequent mobility analysis provides an algorithmic framework for synthesising a task-based rehabilitation device. Manual physiotherapy is reported as repeated task, expensive and time-consuming, and considered stressful for the therapist or assistants to provide one-on-one physiotherapy to each patient in the traditional method. Robotic rehabilitation is, therefore, a viable option. In the several reported works on robotic rehabilitation exoskeletons, misalignment of the exoskeleton and the human motion is considered an open challenge. Normally, it is being managed through large number of degrees of freedom, which is certainly expensive and complex in control. The proposed approach of developing a human-motion-oriented rehabilitation device deals with the problem through hybrid architectures and modular strategy to develop them. While focusing upon the emulation of natural human motion trajectory, the compatibility of orthotic joint and human joint motion needs attention. As biological joint possesses complex kinematic characteristics, closed-loops are used in the design. Overall, a complete framework of a cost effective low-dof rehabilitation device is proposed and detailed through coupled analysis.

An upper-body rehabilitation exoskeleton Harmony with an anatomical shoulder mechanism: Design, modeling, control, and performance evaluation

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Exploring the Capabilities of Harmony for Upper-Limb Stroke Therapy

Design of a wearable shoulder exoskeleton robot with dual-purpose gravity compensation and a compliant misalignment compensation mechanism

Design, optimization, and analysis of a human-machine compatibility upper extremity exoskeleton rehabilitation robot

Kinematic Modeling and Analysis of a Novel Bio-Inspired and Cable-Driven Hybrid Shoulder Mechanism

Architectural design and development of an upper-limb rehabilitation device: a modular synthesis approach

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Design and Validation of a Compatible 3-Degrees of Freedom Shoulder Exoskeleton with an Adaptive Center of Rotation

An Eight-Degree-of-freedom Upper Extremity Exoskeleton Rehabilitation Robot: Design, Optimization, and Validation

Modulation of shoulder muscle and joint function using a powered upper-limb exoskeleton

Design and kinematical performance analysis of the 7-DOF upper-limb exoskeleton toward improving human-robot interface in active and passive movement training

Optimal design of active-passive shoulder exoskeletons: a computational modeling of human-robot interaction

An Upper Limb Exoskeleton Motion Generation Algorithm Based on Separating Shoulder and Arm Motion

AGREE: A Compliant-Controlled Upper-Limb Exoskeleton for Physical Rehabilitation of Neurological Patients

Design and Control of a Reconfigurable Upper Limb Rehabilitation Exoskeleton With Soft Modular Joints

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

ANYexo 2.0: A Fully Actuated Upper-Limb Exoskeleton for Manipulation and Joint-Oriented Training in All Stages of Rehabilitation

A Novel Multi-Dof Exoskeleton Robot for Upper Limb Rehabilitation

Modular Design and Implementation of Upper Limb Exoskeleton Rehabilitation Robot: Structure, Force Sensor and Control

A Pilot Study of A Continuum Shoulder Exoskeleton for Anatomy Adaptive Assistances