Abstract:Background: Upper-limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. The design of exoskeleton mechanisms plays a key role to improve human-robot interface in the upper-limb movements under passive and active rehabilitation training. Objective: This paper proposes a novel of the 7-DOF (RR-RR-PRR) under-actuated exoskeleton mechanism based on the characteristics of the upper-limb movements in both of active and passive training. This aim of the proposed work is to improve human-robot interface in rehabilitation training with robots. Methods: Firstly, the characteristics of active and passive movement training are analyzed depending on the human upper-limb model. Then, a novel 7-DOF (RR-RR-PRR) exoskeleton mechanism is proposed based on the analyzed characteristics. After that, kinematical performances of the proposed exoskeleton are analyzed on the workspace, manipulability and manipulability ellipsoid by compared with the common exoskeleton configuration of the 7 DOFs (RRR-R-PRR) mechanism. In the end, the prototype is manufactured and tested by undergoing the experiments of single-joint passive movement training and multi-joint active movement training. The human-robot interface of the proposed exoskeleton is demonstrated by root mean square error, Pearson correlation coefficient, and the time-delay difference. Results: The results of the kinematical performance show that the effective workspace and the flexibility of the exoskeleton with the proposed configuration are increased by 10.44% and 1.7%. In the single-joint passive movement training experiment, the root mean square errors are 6.986, 7.568, 5.846, and Pearson correlation coefficients are 0.989, 0.984, 0.988 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.1%. In the multi-joint active movement training experiment, the root mean square errors are 9.312 and 7.677, and Pearson correlation coefficients are 0.906 and 0.968 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.28%. Conclusions: The proposed 7 DOFs exoskeleton mechanism shows uniformity with that of the common exoskeleton on the same rehabilitation trajectory which is effective to improve human-robot interface under passive and active rehabilitation training.

Research on Bionic Mechanism of Shoulder Joint Rehabilitation Movement

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Design and analysis of shoulder joint exoskeleton rehabilitation mechanism based on gear and rack transmission

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Design and Control of an Upper Limb Bionic Exoskeleton Rehabilitation Device Based on Tensegrity Structure

Design of a biologically inspired lower limb exoskeleton for human gait rehabilitation

Design, optimization, and analysis of a human-machine compatibility upper extremity exoskeleton rehabilitation robot

Configuration and Parameter Optimization Design of a Novel RBR-2RRR Spherical Hybrid Bionic Shoulder Joint

Design and kinematical performance analysis of the 7-DOF upper-limb exoskeleton toward improving human-robot interface in active and passive movement training

An upper-body rehabilitation exoskeleton Harmony with an anatomical shoulder mechanism: Design, modeling, control, and performance evaluation

Kinematic Modeling and Analysis of a Novel Bio-Inspired and Cable-Driven Hybrid Shoulder Mechanism

Configuration Design of an Upper Limb Rehabilitation Robot with a Generalized Shoulder Joint

An Upper Limb Exoskeleton Motion Generation Algorithm Based on Separating Shoulder and Arm Motion

[Structure Design of Hip Joint Parallel Rehabilitation Exoskeleton]

Design and Validation of a Compatible 3-Degrees of Freedom Shoulder Exoskeleton with an Adaptive Center of Rotation

Design and analysis of a multi-motion self-balancing lower limb exoskeleton based on flat terrain

Glenohumeral joint trajectory tracking for improving the shoulder compliance of the upper limb rehabilitation robot

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

An Eight-Degree-of-freedom Upper Extremity Exoskeleton Rehabilitation Robot: Design, Optimization, and Validation

Mechanism Design and Performance Analysis of a Wearable Hand Rehabilitation Robot

Experimental Design Verification of a Compliant Shoulder Exoskeleton.