Abstract:Abstract The Bahrain field is one of the oldest developed oil fields in the Middle East, with over a dozen formations in production since the early 1930s. Currently, development of the shallow zones (<2,000 ft) of the Magwa and Ostracod formations is a challenge due to the unique complexity and extreme clay sensitivity. With previous fracturing attempts showing limited success, enhanced laboratory testing was undertaken to make fracturing treatments economic. Formation stabilization improvement is crucial in certain reservoir mineralogies, especially those with exposed shale streaks and high concentrations of clays that exhibit extremely high brine sensitivity. Lack of adequate stabilization of sensitive clays and shales risks the deconsolidation of those minerals into fines that may potentially damage the conductivity of the proppant pack in fracturing operations. Many problems associated with the use of water-based fluids in fracturing operations are caused by incompatibilities between the fracturing fluid and the shale minerals, resulting in a fines migration problem in the relatively low-permeability reservoir and a production decline after the fracturing operation. A scientific approach was applied to the selection of novel shale inhibitors to be used in fracturing applications. First, a laboratory testing program was followed to incorporate a new shale inhibitor into the fracturing fluid system. The fluid recipe was further optimized with a reduction in polymer loading, maximizing breaker concentration and ensuring fast shear recovery, because the stimulation design called for large-size proppant (up to 12/20 mesh) to be used in a low-temperature (124°F) environment. The laboratory results demonstrated that the new shale inhibitor significantly reduces alteration of the permeability of the treated core and improves shale stability. The new inhibitor was deployed in the field, as documented in several case histories. Production results of the treated wells demonstrated several-folds increase in production when compared to previously attempted proppant fracturing treatments. The pilot stimulation campaign proved the value of the laboratory research and brought on line two formations with large potential contribution to Bahrain's overall oil production. Although there is a substantial amount of literature on shale inhibition with water-based drilling fluid, the importance of the shale inhibition and the problems associated with shale reactivity during the fracturing operation remain largely unexplored. This paper presents the complex laboratory approach to stimulation fluid optimization in the Bahrain field. The novel solutions and comprehensive workflow description will benefit a broad variety of projects worldwide targeting water-sensitive or low-temperature formations that represent challenges to fracturing fluid selection.

Field application of adding formate salts exertion on the water based drilling fluid properties enhancement: an experimental comparative analysis

Evaluation of Thermal Stability by Comparison of Potassium Chloride and Potassium/Sodium Formate Fluids

Recommendations for Compatibility of Different Types of Polymers with Potassium/Sodium Formate-Based Fluids for Drilling Operations: An Experimental Comparative Analysis

Effectiveness of cellulose polyanionic-based polymers on the measurement of rheological properties of water-based drilling fluids in high-pressure high-temperature fractured shale reservoirs

Studying the Effect of Geological Formation and Formation Water on Drilling Fluid Performance (Case Study)

Experimental investigation of a new weak-gel-type clay-free and water-based drilling fluid with high-temperature and high-salt resistance for determining its optimized formulation

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Rheological Property Measurement and Application of Formate-Based Drilling Fluids at Elevated Temperatures: A Review

Preparation of a salt-responsive zwitterionic hydrophobically associating polymer and its application in a saturated sodium chloride drilling fluid

Research and Application of High Temperature and Ultrahigh Density Drilling Fluid in Deep Wells

Design and Application of High-Temperature Raw-Seawater-Based Fracturing Fluids

Investigation on Filtration Control of Zwitterionic Polymer AADN in High Temperature High Pressure Water-Based Drilling Fluids

Experimental Investigation of the Rheological Behavior of an Oil-Based Drilling Fluid with Rheology Modifier and Oil Wetter Additives

A comparative study of brine solutions as completion fluids for oil and gas fields

Foam Stability Analysis at High pH and Saline Environments for Underbalanced Drilling Operations

How to Make Sensitive Formations Produce Oil: Case Study of the Complex Laboratory Approach to Stimulation Fluid Optimization

A state of the art review on the performance of high-pressure and high-temperature drilling fluids: Towards understanding the structure-property relationship of drilling fluid additives

Variation of Temperatures with Rheological Properties of Water Based Drilling Fluid Containing Rice Husk and Other Additives

Research of Bare-Free Drilling Fluids

Water-based drilling fluids for high-temperature applications and water-sensitive and dispersible shale formations

Experimental Investigation and Performance Evaluation of a Novel High Temperature Tolerant Seawater-based Fracturing Fluid