Abstract:The natural pore structure of corn stalk core potentially contributes as a basic material for activated carbon. The activated carbon from a combination of chemical and physical activation is presented for capacitive energy storage. The chemical activation was carried out using 0.4 M KOH followed by pyrolysis process up to 600°C in an N2 atmosphere. The physical activation was conducted at various temperatures such as 600°C, 700°C, and 800°C with a CO2 gas flow rate of 10 mL/min. Supercapacitor cells were made from carbon electrodes of corn stalk core, 316L stainless steel as the current collector, duck eggshell as the separator, and 1 M H2SO4 as the electrolyte solution. The physical properties of carbon electrodes were characterized by identifying the density, surface morphology and chemical structure of carbon. The density value was obtained based on the mass, thickness, and diameter of the carbon electrode. The lowest density was found at the activation temperature of 700°C which has the potential to produce the best performance in supercapacitor cells. SEM was used to characterize the surface morphology. The activation temperature of 700°C showed the formation of irregular structures and provided large pores for the diffusion of electrolyte ions into the carbon matrix. The FTIR characterization was used to determine the carbon chain elements which formed double layers in supercapacitor cells. The electrochemical properties of supercapacitor cells were tested using cyclic voltammetry. Specific capacitances at the activation temperature of 600°C, 700°C, and 800°C were 90 Fg-1, 108.92 Fg-1, and 44.875 Fg-1, respectively. These results showed that the activation temperature of 700°C was the best temperature in the preparation of supercapacitor electrodes from corn stalk core as the biomass material.

Carbon cryogel from resorcinol formaldehyde: tuning of processing steps and activation for use in supercapacitor

Preparation and Electrochemical Properties of PF-based Activated Carbon

Black goes green: single-step solvent exchange for sol-gel synthesis of carbon spherogels as high-performance supercapacitor electrodes

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Studies on preparation and performances of carbon aerogel electrodes for the application of supercapacitor

Preparation of carbon aerogel electrodes for supercapacitor and their electrochemical characteristics

Vaporized Hydrothermal Functionalization of Carbon Fiber and Its Superior Supercapacitor Performance

Highly Porous Chemically Modified Carbon Cryogels and Their Coherent Nanocomposites for Energy Applications

High-performance Porous Carbon for Supercapacitors Prepared by One-Step Pyrolysis of PF/gelatin Blends

Co-activation Pore Engineering of Polyphthalocyanine-Derived Carbon Nanosheets for Supercapacitors in Organic Electrolytes

Almond Skin Derived Porous Biocarbon Nanoarchitectonics with Tunable Micro and Mesoporosity for CO 2 Adsorption and Supercapacitors

Nickel Acetate-Assisted Graphitization of Porous Activated Carbon at Low Temperature for Supercapacitors With High Performances

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

Carbon Electrodes from Corn Stalk Core for Supercapacitor Application

Ultrafast pore-tailoring of dense microporous carbon for high volumetric performance supercapacitors in organic electrolyte

Porous Carbon for Electrochemical Capacitors Prepared from A Resorcinol/Formaldehyde-Based Organic Aquagel with Nano-Sized Particles

High-Performance Supercapacitors Using Compact Carbon Hydrogels Derived from Polybenzoxazine

A Facile Alkali-Assisted Synthesis Strategy for Hierarchical Porous Carbon Aerogels for Supercapacitors

Fabrication of Porous Carbon Nanofibers from Polymer Blends Using Template Method for Electrode-Active Materials in Supercapacitor