Abstract:Abstract In a data center, electronic equipment such as server and switches dissipate heat and the corresponding cooling systems contribute to typically 25–35% of total energy consumption. The heat load continues to increase as there is a greater need for miniaturization and convergence. In 2014, data centers in the U.S. consumed an estimated 70 billion kWh, representing about 1.8% of total U.S. electricity consumption. Based on current trend estimates, U.S. data centers are projected to consume approximately 73 billion kWh in 2020 [1]. Many research and strategies are adopted to minimize energy cost. The recommended dry bulb temperature for long-term operation and reliability for air cooling is between 18–27°C and the largest allowable inlet temperature range to operate at is between 5°C and 45°C with American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) enabling much broader allowable zones) [2]. But understanding a proper cooling system is very important especially for thermal management of IT equipment with high heat loads such as 1U or 2U multi-core, high-end servers and blade servers which provide more computing per watt. Many problems like high inlet temperature due to the mixing of hot air with cold air, local hot spots, lower system reliability, increased failure, and downtime may occur. Among many other approaches to managing high-density racks, in-row coolers are used in between racks to provide cold air and minimize local hot spots. This paper describes a computational study being performed by applying in-row coolers for different rack power configuration with and without aisle containment. The power, as well as the number of racks, are varied to study the effect of raised inlet temperature for the IT equipment in a Computational Fluid Dynamics (CFD) model developed in 6SigmaRoom with the help of built-in library items. A comparative analysis is also performed for a typical small-sized non-raised facility to investigate the efficacy and limitations of in-row coolers in thermal management of IT equipment with variation in rack heat load and containment. Several other aspects like a parametric study of variable opening areas of duct between racks and in-row coolers, the variation of operating flow rate and failure scenarios are also studied to find proper flow distribution, uniformity of outlet temperature and predict better performance, energy savings and reliability. The results are presented for general guidance for flexible and quick installation and safe operation of in-row coolers to improve thermal efficiency.

Server Utilization-Based Smart Temperature Monitoring System for Cloud Data Center

Energy-Efficient Management of Data Center Resources for Cloud Computing: A Vision, Architectural Elements, and Open Challenges

GEECO: Green Data Centers for Energy Optimization and Carbon Footprint Reduction

Data Centers Cooling: A Critical Review of Techniques, Challenges, and Energy Saving Solutions.

Real-time optimization of the liquid-cooled data center based on cold plates under different ambient temperatures and thermal loads

Comprehensive survey on energy-aware server consolidation techniques in cloud computing

Optimal Design and Modeling of Server Cabinets With In-Row Coolers and Air Conditioning Units in a Modular Data Center

Power Usage Efficiency (PUE) Optimization with Counterpointing Machine Learning Techniques for Data Center Temperatures

Investigations of the Energy-Saving Technology of a Cloud Computing Data Center

Heuristics and Metaheuristics for Dynamic Management of Computing and Cooling Energy in Cloud Data Centers

Simulation Study of Modular Independent Cooling Systems for Servers

Use of time-series based forecasting technique for balancing load and reducing consumption of energy in a cloud data center

A survey of energy-saving technologies in cloud data centers

Artificial Intelligence-Based Temperature Twinning and Pre-Control for Data Center Airflow Organization

Energy efficiency in cloud computing data centers: a survey on software technologies

Optimization Techniques For Low Energy Consumption In Green Cloud Computing

A Measurement-based Analysis of the Energy Consumption of Data Center Servers

Field test of cooling systems in two air-cooled data centers: Various regions, air distributions and evaporative cooling technologies

A Cloud Monitor to Reduce Energy Consumption With Constrained Optimization of Server Loads

Green Cloud Computing: Balancing Energy in Processing, Storage, and Transport.

Cloud Servers: Resource Optimization Using Different Energy Saving Techniques