Abstract:Aircraft nuclear propulsion (ANP) has many historical explorations, but also features with high power density and high operating temperature. These challenges lead to numerical investigations for the transient behaviors of gas-cooled reactors to be used for ANP system. This prismatic-block type reactor is featured by a large number of internal discrete cooling holes with high aspect ratio. When using conjugate heat transfer (CHT) model in CFD analyses for the entire solid core of such type of reactors, the refined mesh resolution near the interface between the fuel matrix and the flow channels leads to high computational costs. Therefore, we proposed a new porous heat transfer (PHT) model with Newton's law of cooling to predict three-dimensional distributions of temper-ature in the solid and fluid domain of the reactor core. The verification of the PHT model is conducted in the presented study firstly, and shows that the accuracy of this model is deeply influenced by the prediction of convective heat transfer coefficients. Sequentially, a neutronics (N) and thermal-hydraulics (TH) transient coupling code is developed in the open-source platform OpenFOAM. The point kinetic model is employed to evaluate the dependency of heat power on the time. Doppler broadening effect is considered in the coupling process by delivering fuel average temperatures. Then coupled N/TH simulations are carried out to analyze the gas-cooled reactor during the start-up process and the blockage accident. The obtained results show that the wall temperature is always lower than the design limit even in a rapid start-up process, indicating that the reactor is safe at extreme operations. Moreover, simulation of the blockage accident shows that if several flow channels are totally occupied by debris, the fuel temperature increment is less than 300 K, and the position of the peak fuel temperature transforms from the core center to the zone near the blockage.

Thermal-Hydraulic Analysis of Bulk Evaporation and Condensation in a Multiphase Nuclear Fuel Cell

Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-Phase Non-Isothermal Mixed-Domain Model

A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations

A single-phase, non-isothermal model for PEM fuel cells

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

Numerical Study on the Effects of Water and Heat Transport on Two-Phase Flow in a Polymer Electrolyte Membrane Fuel Cell

Numerical Simulation of Water and Heat Transport in the Cathode Channel of a PEM Fuel Cell

Studies on the Critical Heat Flux in Fuel Assembly Using a Modified Two-Phase Multi-Scale Interface Model-Validation and Sensitivity Analysis

Modified Evaporation Model for ATHLET System Code in a Passive Containment Cooling System for Nuclear Safety

A Study of Thermal Transient Performances of Molten Carbonate Fuel Cells

Modeling of Thermal Hydraulic Characteristics for a LBE-Cooled Fast Reactor Helical Coiled Type Steam Generator

Numerical analysis of two-phase flow and heat transfer of fuel particles and liquid metal for waste transmutation blanket

A Mathematic Model of Two-Phase Flow Taking Account of Sub-Cooled Boiling, Condensation, and Void Flashing

Numerical Analysis of Temperature Distribution of a High-temperature Fuel Cell in the Method of Weighted Residuals

Conceptual Multi-Physic Coupling Simulation on Transient Operations of a He-Xe Cooled Mobile Nuclear Power Plant

Computational fluid dynamics numerical simulation of molten carbonate fuel cells

Coupled neutronics and thermal-hydraulics transient simulation of a gas-cooled reactor in the aircraft nuclear propulsion system

CFD simulation of thermal hydraulic phenomena in enclosed cavity of nuclear power plants

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures

Numerical Simulation of Thermal-Hydraulic Characteristics in a Proton Exchange Membrane Fuel Cell