Abstract:Sample geometry, setup of the tensile test, bearing test, and compression test and tensile, bearing and compressive strength results. Thermoplastic polycarbonate provides minimal structural weight and ductility and is a recyclable material. However, investigation of the characteristics of hybrid composites reinforced with woven glass and polycarbonate sheets is limited. This current study investigated the effect of integration of polycarbonate sheets on glass fiber‐epoxy hybrid composite performance. Non hybrid laminate was fabricated from eight layers of woven glass fiber impregnated with epoxy resin (NG). However, the hybrid samples utilized various symmetric stacking patterns which were made by alternating two processed polycarbonate (PC) sheets with six layers of woven glass fiber embedded with epoxy matrix. The manufacturing was made using the hand layup procedure. Mechanical testing includes compressive, tensile, bearing, and hardness was performed on hybrid and non‐hybrid composites. The results showed that employing PC sheets instead of fibers affect the laminate's strength, ductility, bearing capacity, and hardness. Utilization of PC sheets reduces both compressive and tensile strength. However, an enhancement in tensile, compressive, and bearing failure strain was achieved by 2.5%, 31.25% and 31.7%, respectively with hybrid composite having PC in the skin layers as compared with NG. The extent of failure damage is correlated with the position of the PC sheets in the tested samples. Highlights Novel hybrid composites of woven glass fiber and polycarbonate sheet as reinforcement with various stacking orders were successfully prepared by the hand lay‐up method. The compressive strain of hybrid PC samples are higher than NG sample. The hybrid PC composites showed an improved bearing strength and strain performance. The influence of sample configuration on the damage mechanisms has been investigated.

Effects of Layer Thickness and Thermal Bonding on Car Seat Cover Development

Interlayer Friction Mechanism and Scale Effects in Ultra-Thin TA1 Titanium Alloy/Carbon Fiber-Reinforced Plastic Laminates

Transport of Moisture in Car Seat Covers

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Air‐laid and foam‐laid nonwoven composites: The effect of carrier medium on mechanical properties

The effect of the interlayer time and deposition speed on the tensile properties of material extrusion components

Exploring the mechanical potential of 3D woven solid structures for car seat cover

The effects of material type and temperature factors on the adhesive bonding strength of 3D printed multi-material plastic structures

Effect of fiber type and thickness on mechanical behavior of thermoplastic composite plates reinforced with fabric plies

Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs

The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process

Effects of welding parameters and thermal insulation on the mechanical behavior and microstructure of friction lap-welded aluminum to glass fiber–reinforced thermoset composite with a thermoplastic PA6 interlayer

The Effect of Surface Substrate Treatments on the Bonding Strength of Aluminium Inserts with Glass-Reinforced Poly(phenylene) Sulphide

Effects of Fabric Weave on the Architecture Coated Fabric Properties

Effect of material and processing parameters on fiber pinning effect and resultant interfacial bonding strength of CF/PEEK bilayer parts in overmolding process

Studying the effect of polycarbonate sheet integration on glass fiber‐epoxy hybrid composite performance for automotive applications

Effect of heat treatment parameters on microstructure evolution, tensile strength, wear resistance, and fracture behavior of Ni–Ti multilayered composites produced by cross-accumulative roll bonding

Thermal and water vapor transmission through porous warp knitted 3D spacer fabrics for car upholstery applications

Effects of Process Parameters in Thermoforming of Unidirectional Fibre-Reinforced Thermoplastics

An experimental study of weave pattern effect on the mechanical and dynamic behavior of composite laminates

The effects of environments and adhesive layer thickness on the failure modes of composite material bonded joints