Abstract:This research is based on synthesis of titania (TiO2) nanophotocatalyst followed by cadmium (Cd) doping to activate the photocatalyst in visible part of the light spectrum. Therefore, the Cd–TiO2 nanophotocatalyst was synthesized in various Cd/Ti molar ratios of 0, 0.05, 0.1, and 0.15 using hydrothermal-assisted sol–gel method. The characterization analyses of X-ray diffraction, field emission scanning electron microscopy, brunauer-emmett-teller, diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric-derivative thermogravimetric, transmission electron microscopy, and energy dispersive X-ray were carried out to evaluate the physical, chemical, and optical properties of the catalysts. The X-ray diffraction analysis resulted a decrease in the crystallinity due to cadmium doping. Field emission scanning electron microscopy images have confirmed the nano-sized structure of the catalysts. The analysis also has demonstrated particle size distribution enhancement with a meaningful low average particle size for Cd/TiO2 (0.15) sample. This sample has represented the highest brunauer-emmett-teller surface area. According to energy dispersive X-ray dot mapping analysis, no aggregation was detected on the catalyst surface. Diffuse reflectance spectroscopy analysis has indicated a moderate decrease in band gap, after Cd loading. The photocatalytic degradation of acid orange 7 dye from the synthetic wastewater was carried out to evaluate the photocatalytic activity. The most effective parameters on the process, such as pH, catalyst loading, and dye concentration, were investigated. According to the characterization analyses and degradation tests, Cd/TiO2 (0.15) was selected as a sample having best structural properties and photocatalytic activity. Finally, the experiments resulted the optimum conditions of pH = 2, catalyst loading of 1 g/L, and dye concentration of 10 mg/L, indicating 95 % of dye degradation after 120 min of experiment.Graphical AbstractThe electron–hole pair generation via transition of electron between the valence and conduction bands (band gap) is the fundamental of any photocatalytic process. After Cd doping, the conduction band position shifts toward the valence band. Then, a valence electron in narrow band gap photocatalyst needs lower energy of light to transfer to conduction band, it means that using light in higher wavelengths (visible light spectra) will be available. In photocatalytic wastewater treatment process, degradation occurs in two ways: the first mechanism is direct oxidation-reduction through electron–hole generation, and the second one would be the oxidation through produced reactive species such as hydroxyl radicals, this route of reaction organizes the major part of wastewater treatment.

Optimization of Photodegradation of Acid Blue 113 Dye on Anatase TiO2 Nanocatalyst Using Response Surface Methodology

Response Surface Methodology: Photocatalytic Degradation Kinetics of Basic Blue 41 Dye Using Activated Carbon with TiO2

Investigation on the Sonocatalytic Degradation of Acid Red B in the Presence of Nanometer TiO2 Catalysts and Comparison of Catalytic Activities of Anatase and Rutile TiO2 Powders.

Photocatalytic Membrane Reactor for Degradation of Acid Red B Wastewater

Photocatalytic degradation of azo dye using nano-ZrO2/UV/Persulfate: Response surface modeling and optimization

The Synthesis of Titania Nanoparticles (TiO2) and its Methylene Blue Dye removal efficiency through Photocatalysis based on Response Surface Methodology (RSM)

Removal of acid red dye 1 from textile wastewater by heterogenous photocatalytic ozonation employing titanium dioxide and iron zeolite

Photocatalytic degradation of Remazol Red B and Rhodamine B dyes using TiO2 nanomaterial: estimation of the effective operating parameters

Optimization of CuAl2O4 Nanoparticles for Enhanced Photocatalytic Degradation of Organic Dyes Under UV and Visible Light

Modeling sustainable photocatalytic degradation of acidic dyes using Jordanian nano-Kaolin-TiO2 and solar energy: Synergetic mechanistic insights

Photocatalytic Degradation of Textile Dyeing Wastewater Using Titanium Dioxide on a Fixed Substrate: Optimization of Process Parameters and Continuous Reactor Tests

Enhanced photocatalytic degradation of Acid Blue dye using CdS/TiO2 nanocomposite

Phenol contaminated water treatment by photocatalytic degradation on electrospun Ag/TiO2 nanofibers: Optimization by the response surface method

Titanium Nanostructures: Advancing Photocatalysis in Complex Systems

Easy and green synthesis of nano-ZnO and nano-TiO2 for efficient photocatalytic degradation of organic pollutants

Optimization of TiO2/ACF Photocatalytic Continuous Treatment of MB Wastewater Based on Response Surface Methodology

Hydrothermal-assisted sol–gel synthesis of Cd-doped TiO2 nanophotocatalyst for removal of acid orange from wastewater

Efficient degradation of dye pollutants on nanoporous polyoxotungstate–anatase composite under visible-light irradiation

Degradation of textiles dyes and scavenging activity of spherical shape obtained anatase phase of Co–Ni-doped TiO2 nanocatalyst

Investigation of Advanced Oxidation Process in the Presence of TiO2 Semiconductor as Photocatalyst: Property, Principle, Kinetic Analysis, and Photocatalytic Activity

Optimization on the heterogeneous photocatalytic degradation of Azorubine E122 dye using nanocomposite via CuO nanoparticles with sodium mordenite