Abstract:FeCo thin films with high saturation magnetization (4 pi M-s) can be applied in high-frequency electronic devices such as thin film inductors and microwave noise suppressors. However, due to its large magnetocrystalline anisotropy constant and magnetostrictive coefficient of FeCo, the coercivity (H-c) of FeCo films is generally high, which is detrimental to the soft magnetic properties. Meanwhile, the thickness and deposition temperature have significant effects on the coercivity and saturation magnetization of FeCo films. In this paper, FeCo thin films with different thicknesses were prepared by magnetron sputtering at different temperatures. The effects of thickness and deposition temperature on the microstructure and magnetic properties of FeCo thin films were systematically studied. When the film thickness increases from 50 nm to 800 nm, the coercivity would decrease from 309 Oe to 160 Oe. However, the saturation magnetization decreases from 22.1 kG to 15.3 kG. After that, we try to further increase the deposition temperature from room temperature (RT) to 475 degrees C. It is intriguing to find that the coercivity greatly decreased from 160 Oe to 3 Oe (decreased by 98%), and the saturation magnetization increased from 15.3 kG to 23.5 kG (increased by 53%) for the film with thickness of 800 nm. For the film with thickness of 50 nm, the coercivity also greatly decreased from 309 Oe to 10 Oe (decreased by 96%), but the saturation magnetization did not change significantly. It is contributed to the increase of deposition temperature, which will lead to the increase of grain size and the decrease of the number of grain boundaries. And the coercivity decreases as the number of grain boundaries decreases. Meanwhile, for the thicker films, when increasing the deposition temperature the thermal stress increases, which changes the appearance of (200) texture, and the saturation magnetization increases. Whereas, it has a negligible effect on the orientation of thin films with small thickness (50 nm). This indicates that high-temperature deposition is beneficial to the soft magnetic properties of FeCo thin films, particularly for the films with larger thickness. This FeCo thin film with high saturation magnetization and low coercivity could be an ideal candidate for high-frequency electronic devices.

Conversion of FeCo from soft to hard magnetic material by lattice engineering and nanopatterning

Soft Magnetism and Microwave Magnetic Properties of Fe-Co-Hf Films Deposited by Composition Gradient Sputtering

Stabilisation of tetragonal FeCo structure with high magnetic anisotropy by the addition of V and N elements

Exceptionally High Saturation Magnetic Flux Density and Ultralow Coercivity Via an Amorphous–Nanocrystalline Transitional Microstructure in an FeCo‐Based Alloy

Soft magnetic properties of Co-doped FeSiBC amorphous and nanocrystalline alloys

Exceptionally High Saturation Magnetic Flux Density and Ultra‐low Coercivity Via an Amorphous‐nanocrystalline Transitional Microstructure in a FeCo‐based Alloy

High Magnetic Performance of Cobalt Ferrite and Anomalous Magnetizing Behavior of Cofe2/Oxide Derived from Ferrite

Large Magnetocaloric Effect and Magnetoresistance in Fe and Co Co‐Doped Ni‐Mn‐Al Heusler Alloys

Induced anisotropy in FeCo-based nanocomposites: Early transition metal content dependence

The magnetic properties and reversal of Fe–Co nanowire arrays

Ultrahigh saturation magnetization in FeCoB powders with controllable amorphous-nanocrystalline structure via the synergism of deformation and energy injection

High Strength and Low Coercivity of Cobalt with Three-Dimensional Nanoscale Stacking Faults

Significant improvement of soft magnetic properties for FeCoSiBC amorphous alloy cores by magnetic field annealing

Large E-field Tunability of Magnetic Anisotropy and Ferromagnetic Resonance Frequency of Co-Sputtered Fe50Co50-B Film

Preparation of Soft Magnetic FeCo-based Films for Writers

Compositional Design and Microstructural Tuning of Fe–Si–Co Soft Magnetic Alloys with Enhanced Performance

The Preparation of High Saturation Magnetization and Low Coercivity Feco Soft Magnetic Thin Films via Controlling the Thickness and Deposition Temperature

Structural, magnetic, and magnetocaloric properties of Fe2CoAl Heusler nanoalloy

Combinatorial Study of Fe-Co-V Hard Magnetic Thin Films

Soft magnetic and structural properties of (FeCo)–(AlSi) alloy thin films

Synthesis, Structure and Magnetic Properties of CoFe2O4 Ferrite Nanoparticles