Artificial neural network analysis of the catalytic efficiency of platinum nanoparticles

Michael Fernandez,Hector Barron,Amanda S. Barnard

DOI: https://doi.org/10.1039/c7ra06622h

2017-01-01

RSC Adv.

Abstract:Accurate predictions of nanocatalyst structure/property relations can be made with large theoretical data sets, rather than limited sets of computational structures, in a fraction of the time using machine learning.

What problem does this paper attempt to address?

Recognition of the three-dimensional structure of small metal nanoparticles by a supervised artificial neural network

Timothée Fages,Franck Jolibois,Romuald Poteau

DOI: https://doi.org/10.1007/s00214-021-02795-0

2021-07-01

Theoretical Chemistry Accounts

Abstract:Catalytic characteristics of metal nanoparticles heavily depend on their global shapes and sizes as well as on the structure and environment of catalytic sites. On the computational chemistry side, calculations of thermodynamic and kinetic data involve a high calculation cost which can be significantly lowered by the use of a trained machine learning model. This paper outlines a preliminary approach that aims at classifying the shape of the metal core of nanoparticles. Four different supervised artificial neural networks were trained, tested and submitted to a challenging dataset. They are based on two different structural descriptors, Coulomb matrices and radial distribution functions (RDFs). Each model is trained with hundreds of 3D models of nanoparticles that belong to eleven structural classes. The best model classifies a NP according to its discretized RDF profile and its first derivative. 100% accuracy is reached on the test stage, and up to 70% accuracy is obtained on the challenging dataset. It is mainly made of compounds that have global shapes significantly different from the training set. But some nonobvious structural patterns make then related to the eleven classes learned by the ANNs. Such strategy could easily be adapted to the recognition of NPs based on experimental neutron or X-ray diffraction data.

chemistry, physical
Machine-learning-accelerated Discovery of Single-Atom Catalysts Based on Bidirectional Activation Mechanism

Zhi Wen Chen,Zhuole Lu,Li Xin Chen,Ming Jiang,Dachang Chen,Chandra Veer Singh

DOI: https://doi.org/10.1016/j.checat.2021.03.003

2021-01-01

Chem Catalysis

Abstract:Single-atom catalysts (SACs) have provided new impetus to the field of catalysis because of their high activity, high selectivity, and theoretically full utilization of active atoms. However, the ambiguous activation mechanism prevents a clear understanding of the structure-activity relationship and results in a great challenge of rational design of SACs. Herein, by combining density functional theory (DFT) calculations with machine learning (ML), we explore 126 SACs to analyze and develop the structure-activity relationship for the electrocatalytic nitrogen reduction reaction (NRR). We first propose a bidirectional activation mechanism with a new descriptor for catalytic activity, which provides new insights for the rational design of SACs. More importantly, we establish a ML model for predicting the catalytic performance of NRR, validated by both DFT calculations and experimental works. The successful ML prediction in this work helps with the accelerated design and discovery of new catalysts by computational screening with high practical significance.
A versatile machine learning workflow for high-throughput analysis of supported metal catalyst particles

Arda Genc,Justin Marlowe,Anika Jalil,Libor Kovarik,Phillip Christopher

2024-10-02

Abstract:Accurate and efficient characterization of nanoparticles (NPs), particularly regarding particle size distribution, is essential for advancing our understanding of their structure-property relationships and facilitating their design for various applications. In this study, we introduce a novel two-stage artificial intelligence (AI)-driven workflow for NP analysis that leverages prompt engineering techniques from state-of-the-art single-stage object detection and large-scale vision transformer (ViT) architectures. This methodology was applied to transmission electron microscopy (TEM) and scanning TEM (STEM) images of heterogeneous catalysts, enabling high-resolution, high-throughput analysis of particle size distributions for supported metal catalysts. The model's performance in detecting and segmenting NPs was validated across diverse heterogeneous catalyst systems, including various metals (Cu, Ru, Pt, and PtCo), supports (silica ($\text{SiO}_2$), $\gamma$-alumina ($\gamma$-$\text{Al}_2\text{O}_3$), and carbon black), and particle diameter size distributions with means and standard deviations of 2.9 $\pm$ 1.1 nm, 1.6 $\pm$ 0.2 nm, 9.7 $\pm$ 4.6 nm, and 4 $\pm$ 1.0 nm. Additionally, the proposed machine learning (ML) approach successfully detects and segments overlapping NPs anchored on non-uniform catalytic support materials, providing critical insights into their spatial arrangements and interactions. Our AI-assisted NP analysis workflow demonstrates robust generalization across diverse datasets and can be readily applied to similar NP segmentation tasks without requiring costly model retraining.

Materials Science,Artificial Intelligence
Machine Learning Prediction of Hydrogen Adsorption Energy on Platinum Nanoclusters: A Comparative Study of SOAP Descriptors

Zhiheng Yu,Yanli Li,Yanwei Wen,Bin Shan,Jiaqiang Yang

DOI: https://doi.org/10.1016/j.comptc.2024.114923

IF: 2.292

2024-01-01

Computational and Theoretical Chemistry

Abstract:Hydrogen binding energy in metal materials is of high significance in the hydrogen storage as well as the hydrogen evolution reaction of electrocatalysis. In this work, the datasets (more than 9000 data) of hydrogen adsorbed on Pt nanoclusters with different sizes are obtained by first-principles calculations. Data analysis shows that the binding strength of hydrogen with Pt is closely relevant to the local structures of the adsorption sites. The local features of the distance between the platinum and hydrogen and the size of the nanoclusters are supplemented to the Smooth Overlap of Atomic Positions descriptors to fit and predict the adsorption energies of hydrogen on different Pt nano-structures by performing the machine learning method. Gaussian Process Regression (GPR) and Random Forest Regressor (RFR) are used to construct the prediction model of hydrogen binding energies and it is found the R2 of test set is improved from 0.63 to 0.78 with modified descriptors. By applying it into other nanoclusters, the MAE of the prediction model is 0.08 eV, which exhibits high accuracy of the hydrogen adsorption energy. Our model can be easily extended to the prediction of hydrogen adsorption energy of other materials with affordable computational cost and accuracy, which would be helpful for the structural design of high-performance catalysts.
Data-efficient modeling of catalytic reactions via enhanced sampling and on-the-fly learning of machine learning potentials

Luigi Bonati,Simone Perego

DOI: https://doi.org/10.26434/chemrxiv-2024-nsp7n

2024-06-06

Abstract:Simulating catalytic reactivity under operative conditions poses a significant challenge due to the dynamic nature of the catalysts and the high computational cost of electronic structure calculations. Machine learning potentials offer a promising avenue to simulate dynamics at a fraction of the cost, but they require datasets containing all relevant configurations, particularly reactive ones. Here we present a scheme to construct reactive potentials in a data-efficient manner. This is achieved by combining enhanced sampling methods first with Gaussian processes to discover transition paths and then with graph neural networks to obtain a uniformly accurate description. The necessary configurations are extracted via an active learning procedure based on local environment uncertainty. We validated our approach by studying several reactions related to the decomposition of ammonia on iron-cobalt alloy catalysts. Our scheme proved efficient, requiring only ~1,000 DFT calculations per reaction, and robust, sampling reactive configurations from the different accessible pathways. Using this potential, we calculated free energy profiles and characterized reaction mechanisms, showing the ability to provide microscopic insights into complex processes under dynamic conditions.

Chemistry
Predicting reaction performance in C–N cross-coupling using machine learning

Derek T Ahneman,Jesús G Estrada,Shishi Lin,Spencer D Dreher,Abigail G Doyle,Derek T. Ahneman,Jesús G. Estrada,Spencer D. Dreher,Abigail G. Doyle

DOI: https://doi.org/10.1126/science.aar5169

IF: 56.9

2018-04-13

Science

Abstract:A guide for catalyst choice in the forest Chemists often discover reactions by applying catalysts to a series of simple compounds. Tweaking those reactions to tolerate more structural complexity in pharmaceutical research is time-consuming. Ahneman et al. report that machine learning can help. Using a high-throughput data set, they trained a random forest algorithm to predict which specific palladium catalysts would best tolerate isoxazoles (cyclic structures with an N–O bond) during C–N bond formation. The predictions also helped to guide analysis of the catalyst inhibition mechanism. Science , this issue p. 186

multidisciplinary sciences
Machine Learning Accelerating Structure Prediction of PtSnO Nanoclusters under Working Conditions

Fanke Zeng,Wanglai Cen

DOI: https://doi.org/10.1039/d4cp03769c

IF: 3.3

2024-10-20

Physical Chemistry Chemical Physics

Abstract:Credible properties exploring or prediction can not be achieved without well-established compositions and structures of catalysts under working conditions. We construct surrogate models via combination of machine learning (ML), genetic algorithms (GA) and ab initio thermodynamics (AITD) to accelerate global optimization of PtSn binary metals oxides, which is typically used for CO2-assisted propane dehydrogenation to propylene. This challenging case illustrates that the subtle oxidized states of PtSnO clusters can be predicted in a large chemical space including a wide range of reaction conditions. The oxidation patterns, phase diagrams and atomic charge distributions of the PtSnO clusters have been discussed. The Sn decorating mechanism to Pt in PtSnO has been explained. These results also indicate the oxidation of PtSn clusters are more feasible under working conditions, and that previous understanding obtained only with fully reduced PtSn alloy may be incomplete.

chemistry, physical,physics, atomic, molecular & chemical
Forecasting Catalytic Property‐Performance Correlations for CO2 Hydrogenation to Methanol via Surrogate Machine Learning Framework

Komal Tripathi,Vrinda Gupta,Varsha Awasthi,Kamal Kishore Pant,Sreedevi Upadhyayula

DOI: https://doi.org/10.1002/adsu.202200416

IF: 6.737

2023-01-31

Advanced Sustainable Systems

Abstract:Artificial neural network (ANN) is developed from an extensively collected database for accurate predictions of CO2 conversion and methanol selectivity after screening nine machine learning (ML) models. Relative importance of process factors is revealed by feature engineering. ML findings for synthesized catalysts unveiled by Cu‐ZnO synergy, thus experimentally validated model efficacy. The strategy provides dynamic solution to uncertainties in catalysis field. The hydrogenation of CO2 to methanol has been studied by several researchers owing to its two significant merits, namely, mitigation of CO2 emissions and production of renewable fuel. Consequently, numerous experiments have been reported for carbon‐neutral methanol synthesis over copper‐based catalysts over the past few years. However, it is very expensive and time‐consuming to always observe reaction changes with respect to input parameters (operating conditions and catalytic properties) experimentally. Herein, this study develops an ultrafast machine learning (ML) based framework to predict CO2 conversion and methanol selectivity by comprehensive knowledge extraction (extensive database construction) from existing published literature. Among various ML algorithms, artificial neural networks (ANNs) exhibit best accuracy with R2test values of 0.885 and 0.861 for CO2 conversion and methanol selectivity, respectively. Subsequently, the efficacy and fidelity of developed neural networks are depicted by satisfactory performance (R2 ≥ 0.80) for majority of unseen test datasets (literature‐based as well as the experimental dataset for Cu/ZnO/Al2O3 catalyst). Finally, this work concludes that this ML‐based concept allows to uncover catalytic property–performance correlations hidden in large body of existing experimental research. This offers an open and generic platform for a major breakthrough of ML in heterogeneous catalysis which can help in planning future experiments.

materials science, multidisciplinary,green & sustainable science & technology
Unsupervised Pattern Recognition on the Surface of Simulated Metal Nanoparticles for Catalytic Applications

Jonathan Yik Chang Ting,George Opletal,Amanda S. Barnard

DOI: https://doi.org/10.1039/d4cy01000k

IF: 6.177

2024-10-01

Catalysis Science & Technology

Abstract:The application of supervised machine learning to the study of catalytic metal nanoparticles has been shown to deliver excellent performance for a range of predictive tasks. However, this success assumes that the particles have been thoroughly characterised and that the property labels are known. Even in exclusively computational studies, the labelling of metal nanoparticles remains the bottleneck for most machine learning studies due to either high computational costs or low relevance to the experimental properties of interest. To facilitate more widespread use of machine learning in catalysis, a computationally affordable strategy to describe metal nanoparticles by a label that is relevant to their catalytic activities is needed. In this study we propose an entirely data-driven approach that can be automated to characterise the patterns and catalytic activities of the surface atoms of simulated metal nanoparticles, and evaluate its utility for catalytic applications.

chemistry, physical
A Theoretical and Experimental Approach for Correlating Nanoparticle Structure and Electrocatalytic Activity

Rachel M. Anderson,David F. Yancey,Liang Zhang,Samuel T. Chill,Graeme Henkelman,Richard M. Crooks

DOI: https://doi.org/10.1021/acs.accounts.5b00125

IF: 24.466

2015-01-01

Accounts of Chemical Research

Abstract:The objective of the research described in this Account is the development of high-throughput computational-based screening methods for discovery of catalyst candidates and subsequent experimental validation using appropriate catalytic nanoparticles. Dendrimer-encapsulated nanoparticles (DENs), which are well-defined 1-2 nm diameter metal nanoparticles, fulfill the role of model electrocatalysts. Effective comparison of theory and experiment requires that the theoretical and experimental models map onto one another perfectly. We use novel synthetic methods, advanced characterization techniques, and density functional theory (DFT) calculations to approach this ideal. For example, well-defined core@shell DENs can be synthesized by electrochemical underpotential deposition (UPD), and the observed deposition potentials can be compared to those calculated by DFT. Theory is also used to learn more about structure than can be determined by analytical characterization alone. For example, density functional theory molecular dynamics (DFT-MD) was used to show that the core@shell configuration of Au@Pt DENs undergoes a surface reconstruction that dramatically affects its electrocatalytic properties. A separate Pd@Pt DENs study also revealed reorganization, in this case a core-shell inversion to a Pt@Pd structure. Understanding these types of structural changes is critical to building correlations between structure and catalytic function. Indeed, the second principal focus of the work described here is correlating structure and catalytic function through the combined use of theory and experiment. For example, the Au@Pt DENs system described earlier is used for the oxygen reduction reaction (ORR) as well as for the electro-oxidation of formic acid. The surface reorganization predicted by theory enhances our understanding of the catalytic measurements. In the case of formic acid oxidation, the deformed nanoparticle structure leads to reduced CO binding energy and therefore improved oxidation activity. The final catalytic study we present is an instance of theory correctly predicting (in advance of the experiments) the structure of an effective DEN electrocatalyst. Specifically, DFT was used to determine the optimal composition of the alloy-core in AuPd@Pt DENs for the ORR. This prediction was subsequently confirmed experimentally. This study highlights the major theme of our research: the progression of using theory to rationalize experimental results to the more advanced goal of using theory to predict catalyst function a priori. We still have a long way to go before theory will be the principal means of catalyst discovery, but this Account begins to shed some light on the path that may lead in that direction.
Artificial intelligence real-time prediction and physical interpretation of atomic binding energies in nano-scale metal clusters

Philomena Schlexer Lamoureux,Tej S. Choksi,Verena Streibel,Frank Abild-Pedersen

DOI: https://doi.org/10.48550/arXiv.2005.02572

2020-05-06

Abstract:Single atomic sites often determine the functionality and performance of materials, such as catalysts, semi-conductors or enzymes. Computing and understanding the properties of such sites is therefore a crucial component of the rational materials design process. Because of complex electronic effects at the atomic level, atomic site properties are conventionally derived from computationally expensive first-principle calculations, as this level of theory is required to achieve relevant accuracy. In this study, we present a widely applicable machine learning (ML) approach to compute atomic site properties with high accuracy in real time. The approach works well for complex non-crystalline atomic structures and therefore opens up the possibility for high-throughput screenings of nano-materials, amorphous systems and materials interfaces. Our approach includes a robust featurization scheme to transform atomic structures into features which can be used by common machine learning models. Performing a genetic algorithm (GA) based feature selection, we show how to establish an intuitive physical interpretation of the structure-property relations implied by the ML models. With this approach, we compute atomic site stabilities of metal nanoparticles ranging from 3-55 atoms with mean absolute errors in the range of 0.11-0.14 eV in real time. We also establish the chemical identity of the site as most important factor in determining atomic site stabilities, followed by structural features like bond distances and angles. Both, the featurization and GA feature selection functionality are published in open-source python modules. With this method, we enable the efficient rational design of highly specialized real-world nano-catalysts through data-driven materials screening.

Chemical Physics,Computational Physics
Predicting outcomes of catalytic reactions using machine learning

Trevor David Rhone,Robert Hoyt,Christopher R. O'Connor,Matthew M. Montemore,Challa S. S. R. Kumar,Cynthia M. Friend,Efthimios Kaxiras,Challa S.S.R. Kumar

DOI: https://doi.org/10.48550/arXiv.1908.10953

IF: 2.552

2019-08-28

Chemical Physics

Abstract:Predicting the outcome of a chemical reaction using efficient computational models can be used to develop high-throughput screening techniques. This can significantly reduce the number of experiments needed to be performed in a huge search space, which saves time, effort and expense. Recently, machine learning methods have been bolstering conventional structure-activity relationships used to advance understanding of chemical reactions. We have developed a model to predict the products of catalytic reactions on the surface of oxygen-covered and bare gold using machine learning. Using experimental data, we developed a machine learning model that maps reactants to products, using a chemical space representation. This involves predicting a chemical space value for the products, and then matching this value to a molecular structure chosen from a database. The database was developed by applying a set of possible reaction outcomes using known reaction mechanisms. Our machine learning approach complements chemical intuition in predicting the outcome of several types of chemical reactions. In some cases, machine learning makes correct predictions where chemical intuition fails. We achieve up to 93% prediction accuracy for a small data set of less than two hundred reactions.
Can Machine Learning Predict the Reaction Paths in Catalytic CO2 Reduction on Small Cu/Ni Clusters?

Rafał Stottko,Elżbieta Dziadyk-Stopyra,Bartłomiej M. Szyja

DOI: https://doi.org/10.3390/catal13121470

IF: 3.9

2023-11-27

Catalysts

Abstract:In this paper, we explore the catalytic CO2 reduction process on 13-atom bimetallic nanoclusters with icosahedron geometry. As copper and nickel atoms may be positioned in different locations and either separated into groups or uniformly distributed, the possible permutations lead to many unnecessary simulations. Thus, we have developed a machine learning model aimed at predicting the energy of a specific group of bimetallic (CuNi) clusters and their interactions with CO2 reduction intermediates. The training data for the algorithm have been provided from DFT simulations and consist only of the coordinates and types of atoms, together with the related potential energy of the system. While the algorithm is not able to predict the exact energy of the given complex, it is able to select the candidates for further optimization with reasonably good certainty. We have also found that the stability of the complex depends on the type of central atom in the nanoparticle, despite it not directly interacting with the intermediates.

chemistry, physical
Predicting Electronic Structure Properties of Transition Metal Complexes with Neural Networks

Jon Paul Janet,Heather J. Kulik

DOI: https://doi.org/10.1039/C7SC01247K

2017-02-20

Abstract:High-throughput computational screening has emerged as a critical component of materials discovery. Direct density functional theory (DFT) simulation of inorganic materials and molecular transition metal complexes is often used to describe subtle trends in inorganic bonding and spin-state ordering, but these calculations are computationally costly and properties are sensitive to the exchange-correlation functional employed. To begin to overcome these challenges, we trained artificial neural networks (ANNs) to predict quantum-mechanically-derived properties, including spin-state ordering, sensitivity to Hartree-Fock exchange, and spin- state specific bond lengths in transition metal complexes. Our ANN is trained on a small set of inorganic-chemistry-appropriate empirical inputs that are both maximally transferable and do not require precise three-dimensional structural information for prediction. Using these descriptors, our ANN predicts spin-state splittings of single-site transition metal complexes (i.e., Cr-Ni) at arbitrary amounts of Hartree-Fock exchange to within 3 kcal/mol accuracy of DFT calculations. Our exchange-sensitivity ANN enables improved predictions on a diverse test set of experimentally-characterized transition metal complexes by extrapolation from semi-local DFT to hybrid DFT. The ANN also outperforms other machine learning models (i.e., support vector regression and kernel ridge regression), demonstrating particularly improved performance in transferability, as measured by prediction errors on the diverse test set. We establish the value of new uncertainty quantification tools to estimate ANN prediction uncertainty in computational chemistry, and we provide additional heuristics for identification of when a compound of interest is likely to be poorly predicted by the ANN.

Materials Science,Chemical Physics
Accurate prediction of binding energies for two‐dimensional catalytic materials using machine learning

Julia Melisande Fischer,Michelle Hunter,Marlies Hankel,Debra J. Searles,Amanda J. Parker,Amanda S. Barnard

DOI: https://doi.org/10.1002/cctc.202000536

IF: 4.5

2020-09-06

ChemCatChem

Abstract:The binding energy of small molecules on two‐dimensional (2D) single atom catalysts influences their reaction efficiency and suitability for different applications. In this study, the binding energy on single metal atoms to N‐doped graphene defects was predicted using random forest regression based on approximately 1700 previously generated density functional theory simulations of catalytic reactions. Three different structural feature groups containing hundreds of individual structural features were created and used to characterise the active sites. This approach was found to be accurate and reliable using either fully relaxed output structures or pre‐simulation input structures, with coefficients of determination of R 2 =0.952 and R 2 =0.865, respectively. The ability to predict optimal 2D‐catalysts before undertaking expensive quantum chemical calculations is an attractive basis for future research, and could be extended to other 2D‐materials.

chemistry, physical
In-Silico Characterization of Nanoparticle Catalysts

Björn Kirchhoff,Christoph Jung,Daniel Gaissmaier,Laura Braunwarth,Donato Fantauzzi,Timo Jacob

DOI: https://doi.org/10.1039/D3CP01073B

2023-03-07

Abstract:Nanoparticles (NPs) make for intriguing heterogeneous catalysts due to their large active surface area and excellent and often size-dependent catalytic properties that emerge from a multitude of chemically different surface reaction sites. NP catalysts are, in principle, also highly tunable: even small changes to the NP size or surface facet composition, doping with heteroatoms, or changes of the supporting material can significantly alter their physicochemical properties. Because synthesis of size- and shape-controlled NP catalysts is challenging, the ability to computationally predict the most favorable NP structures for a catalytic reaction of interest is an in-demand skill that can help accelerate and streamline the material optimization process. Fundamentally, simulations of NP model systems present unique challenges to computational scientists. Not only must considerable methodological hurdles be overcome in performing calculations with hundreds to thousands of atoms while retaining appropriate accuracy to be able to probe the desired properties. Also, the data generated by simulations of NPs are typically more complex than data from simulations of, for example, single crystal surface models, and therefore often requires different data analysis strategies. To this end, the present work aims to review analytical methods and data analysis strategies that have proven useful in extracting thermodynamic trends from NP simulations.

Chemical Physics
Machine-Learning-Augmented Chemisorption Model for CO2 Electroreduction Catalyst Screening.

Luke E. K. Achenie,Xianfeng Ma,Zheng Li,H. Xin

DOI: https://doi.org/10.1021/acs.jpclett.5b01660

2015-08-27

Abstract:We present a machine-learning-augmented chemisorption model that enables fast and accurate prediction of the surface reactivity of metal alloys within a broad chemical space. Specifically, we show that artificial neural networks, a family of biologically inspired learning algorithms, trained with a set of ab initio adsorption energies and electronic fingerprints of idealized bimetallic surfaces, can capture complex, nonlinear interactions of adsorbates (e.g., *CO) on multimetallics with ∼0.1 eV error, outperforming the two-level interaction model in prediction. By leveraging scaling relations between adsorption energies of similar adsorbates, we illustrate that this integrated approach greatly facilitates high-throughput catalyst screening and, as a specific case, suggests promising {100}-terminated multimetallic alloys with improved efficiency and selectivity for CO2 electrochemical reduction to C2 species. Statistical analysis of the network response to perturbations of input features underpins our fundamental understanding of chemical bonding on metal surfaces.

Chemistry,Medicine,Computer Science
A machine-learning tool to predict substrate-adaptive conditions for Pd-catalyzed C–N couplings

N. Ian Rinehart,Rakesh K. Saunthwal,Joël Wellauer,Andrew F. Zahrt,Lukas Schlemper,Alexander S. Shved,Raphael Bigler,Serena Fantasia,Scott E. Denmark

DOI: https://doi.org/10.1126/science.adg2114

IF: 56.9

2023-09-02

Science

Abstract:Machine-learning methods have great potential to accelerate the identification of reaction conditions for chemical transformations. A tool that gives substrate-adaptive conditions for palladium (Pd)–catalyzed carbon-nitrogen (C–N) couplings is presented. The design and construction of this tool required the generation of an experimental dataset that explores a diverse network of reactant pairings across a set of reaction conditions. A large scope of C–N couplings was actively learned by neural network models by using a systematic process to design experiments. The models showed good performance in experimental validation: Ten products were isolated in more than 85% yield from a range of couplings with out-of-sample reactants designed to challenge the models. Importantly, the developed workflow continually improves the prediction capability of the tool as the corpus of data grows.

multidisciplinary sciences
Examining Generalizability of AI Models for Catalysis

Kamal Choudhary,Shih-Han Wang,Hongliang Xin,Luke Achenie

DOI: https://doi.org/10.26434/chemrxiv-2024-hj733

2024-09-25

Abstract:In this work, we investigate the generalizability of problem-specific machine-learning models for catalysis across different datasets and adsorbates, and examine the potential of unified models as pre-screening tools for density functional theory calculations. We develop graph neural network models for 12 different datasets for catalysis and then cross-evaluate their performance. Unified models include ALIGNN-FF, MATGL, CHGNet, and MACE. Pearson correlation coefficient analysis indicates that generalizability improves when similar adsorbates are used for training and testing or when a larger database is employed for training. Results demonstrate that while the accuracy of the unified models has room for improvement, their excellent performance in predicting the trend of adsorption energies can be a valuable pre-screening tool for selecting potential candidates prior to resource-intensive DFT calculations in catalyst design, thereby reducing computational expenses. The tools used in this work will be made available at: \url{https://github.com/usnistgov/catalysismat}.

Chemistry
Comprehensive sampling of coverage effects in catalysis by leveraging generalization in neural network models

Daniel Schwalbe-Koda,Nitish Govindarajan,Joel Varley

DOI: https://doi.org/10.26434/chemrxiv-2023-f6l23-v2

2024-10-17

Abstract:Sampling high-coverage configurations and predicting adsorbate-adsorbate interactions on surfaces are highly relevant to understand realistic interfaces in heterogeneous catalysis. However, the combinatorial explosion in the number of adsorbate configurations among diverse site environments presents a considerable challenge in accurately estimating these interactions. Here, we propose a strategy combining high-throughput simulation pipelines and a neural network-based model with the MACE architecture to increase sampling efficiency and speed. By training the models on unrelaxed structures and energies, which can be quickly obtained from single-point DFT calculations, we achieve excellent performance for both in-domain and out-of-domain predictions, including generalization to different facets, coverage regimes and low-energy configurations. From this systematic understanding of model robustness, we exhaustively sample the configuration phase space of catalytic systems without active learning. In particular, by predicting binding energies for over 14 million structures within the neural network model and the simulated annealing method, we predict coverage-dependent adsorption energies for CO adsorption on six Cu facets (111, 100, 211, 331, 410 and 711) and the co-adsorption of CO and CHOH on Rh(111). When validated by targeted post-sampling relaxations, our results for CO on Cu correctly reproduce experimental interaction energies reported in the literature, and provide atomistic insights on the site occupancy of steps and terraces for the six facets at all coverage regimes. Additionally, the arrangement of CO on the Rh(111) surface is demonstrated to substantially impact the activation barriers for the CHOH bond scission, illustrating the importance of comprehensive sampling on reaction kinetics. Our findings demonstrate that simplified data generation routines and evaluating generalization of neural networks can be deployed at scale to understand lateral interactions on surfaces, paving the way towards realistic modeling of heterogeneous catalytic processes.

Chemistry

Artificial neural network analysis of the catalytic efficiency of platinum nanoparticles

Recognition of the three-dimensional structure of small metal nanoparticles by a supervised artificial neural network

Machine-learning-accelerated Discovery of Single-Atom Catalysts Based on Bidirectional Activation Mechanism

A versatile machine learning workflow for high-throughput analysis of supported metal catalyst particles

Machine Learning Prediction of Hydrogen Adsorption Energy on Platinum Nanoclusters: A Comparative Study of SOAP Descriptors

Data-efficient modeling of catalytic reactions via enhanced sampling and on-the-fly learning of machine learning potentials

Predicting reaction performance in C–N cross-coupling using machine learning

Machine Learning Accelerating Structure Prediction of PtSnO Nanoclusters under Working Conditions

Forecasting Catalytic Property‐Performance Correlations for CO2 Hydrogenation to Methanol via Surrogate Machine Learning Framework

Unsupervised Pattern Recognition on the Surface of Simulated Metal Nanoparticles for Catalytic Applications

A Theoretical and Experimental Approach for Correlating Nanoparticle Structure and Electrocatalytic Activity

Artificial intelligence real-time prediction and physical interpretation of atomic binding energies in nano-scale metal clusters

Predicting outcomes of catalytic reactions using machine learning

Can Machine Learning Predict the Reaction Paths in Catalytic CO2 Reduction on Small Cu/Ni Clusters?

Predicting Electronic Structure Properties of Transition Metal Complexes with Neural Networks

Accurate prediction of binding energies for two‐dimensional catalytic materials using machine learning

In-Silico Characterization of Nanoparticle Catalysts

Machine-Learning-Augmented Chemisorption Model for CO2 Electroreduction Catalyst Screening.

A machine-learning tool to predict substrate-adaptive conditions for Pd-catalyzed C–N couplings

Examining Generalizability of AI Models for Catalysis

Comprehensive sampling of coverage effects in catalysis by leveraging generalization in neural network models