Abstract:Purpose - The purpose of this paper is to focus on the accurate and steady control on trajectory tracking for wafer transfer robot, suppress the vibration and reduce the contour error.Design/methodology/approach - The wafer transfer robot dynamic model is modeled. Through analyzing the characteristics of wafer transfer robot, cross-coupled synchronized control is proposed based on the contour error model in task space to improve synchronization of the joints; the shaping for the joints by input shaper in task space is applied to suppress the vibration of the end effector during trajectory tracking. Then combining the cross-coupled synchronized control with input shaping is proposed to improve accuracy and suppress the vibration.Findings - The combination of cross-coupled synchronized control and input shaping control method can improve the contour accuracy and reduce the vibration simultaneously during trajectory tracking. And the control method can be used to control the trajectory of wafer transfer robot.Research limitations/implications - The transfer station is in the center of the robot body. When the transfer station may deviate from the center of the robot body, the synchronizing performance of three axes on the same plane must be considered.Practical implications - The proposed method can be used to solve the vibration and synchronizing performance problems on similar SCARA robots in semi-conductor and liquid crystal display industry.Originality/value - The proposed control method takes advantage of the cross-coupled synchronized control and input shaping control method. This combination has improved contour accuracy and reduced vibration than applying other methods, and it has achieved better performance than using single one control method only.

Global Feedforward Control of Spatio-Temporal Mechanical Systems: With Application to a Prototype Wafer Stage

Adaptive Control of Vertical Stage of A Robot Arm for Wafer Handling

Robust Control of High Speed High Precision Linear Motion System

Optimal feedforward control with a parametric structure applied to a wafer stage.

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Active Compensation of Position Dependent Flexible Dynamics in High-Precision Mechatronics

Real-Time Iterative Compensation Control Using Plant-Injection Feedforward Architecture with Application to Ultraprecision Wafer Stages

Frequency-Domain Data-Driven Adaptive Iterative Learning Control Approach: With Application to Wafer Stage

Data-Based Switching Feedforward Control for Repeating and Varying Tasks: with Application to an Ultraprecision Wafer Stage.

Robust Control of Dual-Linear-Motor-Driven Gantry Stage for Coordinated Contouring Tasks Based on Feed Velocity

Dynamic Analysis and Model-Based Feedforward Control of a 2-Dof Translational Parallel Manipulator Driven by Linear Motors

Precise Motion Control of Wafer Stages via Adaptive Neural Network and Fractional-Order Super-Twisting Algorithm

State/Model-Free Variable-Gain Discrete Sliding Mode Control for an Ultraprecision Wafer Stage

High-Precision Control of Industrial Robot Manipulator Based on Extended Flexible Joint Model

An Integrated Model-Data-Based Zero-Phase Error Tracking Feedforward Control Strategy with Application to an Ultraprecision Wafer Stage.

Contouring Performance-Oriented Cross-Coupled Desired Compensation Adaptive Robust Control For A Flexure-Based Stage

Data-Driven Feedforward Learning With Force Ripple Compensation for Wafer Stages: A Variable-Gain Robust Approach

Motion Control of Wafer Scanners in Lithography Systems: from Setpoint Generation to Multi-Stage Coordination

Intelligent Tracking Error Prediction and Feedforward Compensation for Nanopositioning Stages with High-bandwidth Control

Accurate And Steady Control On Trajectory Tracking For The Wafer Transfer Robot