Abstract:This study employs computational fluid dynamics (CFD) simulations to evaluate the risk of airborne transmission of COVID-19 in low-ceiling rooms, such as elevator cabins, under mechanical displacement ventilation. The simulations take into account the effects of the human body's thermal environment and respiratory jet dynamics on the transmission of pathogens. The results of the study are used to propose a potential mitigation strategy based on ventilation thermal control to reduce the risk of airborne transmission in these types of enclosed indoor spaces. Our findings demonstrate that as the ventilation rate (Qv) increases, the efficiency of removing airborne particles (Ep) initially increases rapidly, reaches a plateau (Ep,c) at a critical ventilation rate (Qc), and subsequently increases at a slower rate beyond Qc. The Qc for low-ceiling rooms is lower compared to high-ceiling rooms due to the increased interaction between the thermal plume generated by the occupants or infectors and the ventilation. Further analysis of the flow and temperature fields reveals that Ep is closely linked to the thermal stratification fields, as characterized by the thermal interface height, the height of the temperature isosurface, and temperature gradient. The simulations also indicate that the location of infector relative to ventilation inlet/outlet affects Qc and Ep,c with higher Qc and lower Ep,c observed when infector is in a corner due to potential formation of a local hot spot of high infection risk when infector is near the ventilation inlet. In conclusion, based on the simulations, we propose a ventilation thermal control strategy, by increasing the ventilation temperature, to reduce the risk of airborne transmission in low-ceiling rooms. Our findings indicate that the thermal environment plays a critical role in the transmission of airborne diseases confined spaces.

Experimental study of the transverse diffusion of pollutants through a downward plane jet in a room

Experimental Investigation of Indoor Air Flows in a Model Room

Experimental and theoretical investigation on transportation of gaseous pollutants in long and narrow industrial buildings

Particle Concentration Profile in a Vertical Displacement Flow: A Study in an Industrial Hall

Comparison of diffusion characteristics of aerosol particles in different ventilated rooms by numerical method

Wind tunnel tests of inter-flat pollutant transmission characteristics in a rectangular multi-storey residential building, part A: Effect of wind direction

Numerical Investigation of Particle Diffusion in A Clean Room

Dispersion of exhalation pollutants in a two-bed hospital ward with a downward ventilation system

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

Numerical investigation of airborne transmission in low-ceiling rooms under displacement ventilation

Numerical Study Of Particle Deposition In Two Differently Ventilated Rooms

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

The mechanism of low-speed steady substitution flow to clean the indoor particulate matter

Removal of Contaminants Released from Room Surfaces by Displacement and Mixing Ventilation: Modeling and Validation.

An experimental study on airborne transmission in a meeting room with different air distribution methods

Decoupling transient effects of factors affected by air recirculation devices on contaminant distribution in ventilated spaces

Experimental investigation of air distribution in an airliner cabin mockup with displacement ventilation

What Dominates Personal Exposure? Ambient Airflow Pattern or Local Human Thermal Plume

Indoor Airflow and Pollutant Spread Inside the Cleanroom with Micro-Porous Supplying Panel and Different Ventilation Schemes: Analytical, Numerical and Experimental Investigations

Contaminant dispersion with personal displacement ventilation, Part I: Base case study

A laboratory study of the expiratory airflow and particle dispersion in the stratified indoor environment