Abstract:The study reported here has established that the ceramic facing brick is characterized by capillary porosity that increases indicators of water absorption and capillary pull, as well as efflorescence formation at its surface. In order to protect the surface of such a brick and to provide it with the improved performance properties, we have used hydrophobizing substances. We have determined experimentally that the application of the PMPhS- and AP-based hydrophobizing agents leads to a decrease in porosity by 1.2-1.3 times, in water absorption ‒ by 1.2‒2.3 times, in water absorption at capillary pull ‒ by 1.1‒3.2 times. Research into frost resistance has found that for the ceramic brick, covered with PMPhS, it increases by 15 cycles, and when treating a brick surface with AP ‒ by 20 cycles, compared to the untreated brick (F50). By employing an electron microscopy, it was determined that the alternating freeze-thawing leads to that the brick's surface, treated with PMPhS and AP, demonstrates the formation of microcracks (in this case, water absorption increased by 42 and 28 %). By applying a method of mathematical planning of the experiment, it was found that the most effective hydrophobizing substance is the modifier that contains the nano-Al 2 O 3 powder (a nano-liquid). It was determined that when treating the surface with a nano-liquid (the amount of nanо-Al 2 O 3 is 0.8 %), its water absorption decreases to 1.2‒1.6 %, its water absorption indicator at capillary pull ‒ to 0.08‒0.12 kg/m 2 ∙h 0.5 . Using a method of defectoscopy, applying the Karsten tube, it was found that water absorption for the brick whose surface was coated with a nano-liquid reduced from 0.15 to 0.002 ml/cm 2 , indicating a high level of hydrophobization. The electron microscopy method confirmed that the modification of the ceramic brick surface by the hydrophobizing nano-fluids makes it possible to compact the structure through the colmatation of pores and microcracks, which reduces the capillary pull of the brickwork. That also leads to the improved atmospheric and frost resistance of brick building structures. Thus, there is a reason to argue about the possibility of improving the physical and technical indicators of the brick building structure by modifying the surface of the ceramic facing brick by a nano-fluid

Reduction of the capillary water absorption of foamed concrete by using the porous aggregate

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Minimizing Drying Shrinkage and Enhancing Impermeability of Foam Concrete Modified with Epoxy Resin

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Experimental study on pore structure characteristics and thermal conductivity of fibers reinforced foamed concrete

Effect of Triterpenoid Saponins as Foaming Agent on Mechanical Properties of Geopolymer Foam Concrete

Study on fresh and hardened state properties of eco-friendly foamed concrete incorporating waste soda-lime glass

Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Frost Resistance and Microscopic Properties of Recycled Coarse Aggregate Concrete Containing Chemical Admixtures

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Strength, Durability, and Microstructure of Foamed Concrete Prepared Using Special Soil and Slag

Studying the efect of nanoliquids on the operational properties of brick building structures

The Application of Granulated Expanded Glass Aggregate with Cement Grout as an Alternative Solution for Sub-Grade and Frost-Protection Sub-Base Layer in Road Construction

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

Influence of Aeolian Sand on Capillary Water Absorption of Concrete Under Freeze–Thaw Conditions

Experimental research on the performance of lightweight concrete containing foam and expanded clay aggregate

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

The Effect of the Addition of Coal Fly Ash (CFA) on the Control of Water Movement within the Structure of the Concrete

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study

Thermal and mechanical properties of coal gasification slag based foam concrete