Abstract:Micro pulse lidar(MPL) is an effective tool for atmospheric aerosol and cloud detecting. In order to make the structure of the micro pulse lidar more compact, solve the problem that it always very difficult to adjust the transmitting and receiving optical paths to parallel in the traditional system, avoid the influence of the geometric overlap factor and reduce the complexity of the data processing, Anhui institute of optics and fine mechanics of the Chinese academy of sciences designs a new type of micro pulse lidar, particularly designs the followed up optical unit of the micro pulse lidar. A combination of emitting and receiving fibers in a signal bundle changes the structure of the subsequent optical unit in the traditional system to make the transmitting and receiving optical paths coaxial. The public end of the Y type optical fiber bundle is composed of a transmitting optical fiber in the center and eight receiving optical fibers in the periphery. After a brief introduction of the new system, the key parameters of the new micro pulse lidar system and the Y type optical fiber bundle were described in some detail. In order to verify the feasibility of the new structure of the micro pulse lidar system, a continuous observation experiment was carried out in Hefei area to detect the horizontal distribution of the atmospheric aerosol and pollutions. The data measured in the experiment in the November 2013 was processed with Fernald method and the profile of the atmospheric aerosol horizontal extinction coefficient distribution was inverted. The data inversion results showed that: the data acquired by the new lidar system and the extinction coefficient distribution inverted by Fernald algorithm are all very reasonable, and the time- space distribution of atmospheric aerosols extinction coefficient can reflect the distribution of the atmospheric aerosol and pollutions near the ground effectively. All of the experiment results indicate that the design of the new micro pulse lidar system is effective.

High energy 2-micron solid-state laser transmitter for NASA's airborne CO2 measurements

Airborne atmospheric carbon dioxide measurement using 1.5??μm laser double-pulse IPDA lidar over a desert area

Frequency-Stabilized Laser System at 1572 Nm for Space-Borne Co2 Detection Lidar

High-Pressure Measurements of Temperature and CO2 Concentration Using Tunable Diode Lasers at 2 μm

External-cavity Diode Laser-Based Near-Infrared Broadband Laser Heterodyne Radiometer for Remote Sensing of Atmospheric CO2

Advanced 2-micron Solid State Laser Developments

[Open-path online monitoring of ambient atmospheric CO2 based on laser absorption spectrum]

Stratospheric aerosol lidar with a 300 µm diameter superconducting nanowire single-photon detector at 1064 nm

High Repetition Rate Mid-Infrared Differential Absorption Lidar for Atmospheric Pollution Detection

A compact tunable diode laser absorption spectrometer to monitor CO2 at 2.7 μm wavelength in hypersonic flows

Long-range Micro-Pulse Aerosol Lidar at 15 Μm with an Upconversion Single-Photon Detector

A Time-Gated, Time-Correlated Single-Photon-Counting Lidar to Observe Atmospheric Clouds at Submeter Resolution

Design study for an airborne N2O lidar

Long-range micro-pulse aerosol lidar at 1.5 um with an up-conversion single-photon detector

A Frequency-Stabilized Laser Based on A Hollow-Core Photonic Crystal Fiber Co2 Gas Cell and Its Application Scheme

The Design and Study of a New Micropulse Lidar

Performance Evaluation of Spaceborne Integrated Path Differential Absorption Lidar for Carbon Dioxide Detection at 1572 nm

Development of a 2 μm Solid-State Laser for Lidar in the Past Decade

Solid-state 589 nm seed laser based on Raman fiber amplifier for sodium wind/temperature lidar in Tibet, China

Ultra-High Resolution Portable Dual-channel Laser Heterodyne Radiometer

Unified Approach to Photon-Counting Microlaser Rangers, Transponders, and Altimeters