Abstract:Aiming at the widespread problem of sloughing coal pillars in thick coal seams in northern Shaanxi mines, a new mechanical model of coal pillars was constructed, the stress change and structural breakage law of each part of the pillars were analyzed, and the stress transfer mechanism of the overburden structure during the recovery process of the comprehensive mining workings in the upper and lower sections was determined, and the sloughing control scheme was formulated. In northern Shaanxi province, the coal seam deposit conditions are generally characterized by large thickness and shallow depth of burial, the phenomenon of coal pillar sloughing is serious in the process of working face retrieval, which brings great potential danger to mine safety production. In this paper, by monitoring the stress and damage of the coal pillar in the field section, the stress changes and damage degree of the working face in different mine stages are determined. A new mechanical model of coal pillar in a thick coal seam is constructed and the stress changes and structural breakage law of each section are obtained, the stress transfers mechanism of overburden structure and the stress damage to coal pillar during the mining process of upper and lower section comprehensive mining working face is analyzed. The stress, microscopic damage, and the degree of sloughing in the coal pillar were significantly reduced by monitoring through the top plate hydraulic cracking pressure relief control program. The results of the study show that the extent of sloughing coal pillar and internal damage is closely related to the length of key block B of the masonry beam formed by the overlying rock layer and the position of the break line, by changing the orientation of the overlying masonry beam rock layer and the position and length of the tendency to break line, the sloughing coal pillar is effectively controlled and its stress and damage are reduced. We have achieved good results in control of the sloughing in the Hanjiawan coal mine and similar mines in northern Shaanxi.

Characterizing strata deformation over coal pillar system in longwall panels by using subsurface subsidence prediction model

Surface Movement and Deformation Characteristics Due to High-Intensive Coal Mining in the Windy and Sandy Region

Characterizing Coal Pillar Deformation and Air Leakage Pattern During Longwall Face Mining

Study on Overlying Strata Movement and Surface Subsidence of Coal Workfaces with Karst Aquifer Water

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Subsurface strata failure and movement based for improving gas emission control: Model development and application

Progressive failure processes and mechanisms of disasters caused by interrelated failure of residual coal pillars and rock strata

Research on prediction method of coal mining surface subsidence based on MMF optimization model

Analysis and control of the mechanism of coal pillar sloughing in the shallow buried thick coal seam

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Numerical Study of Failure Mechanisms and Control Techniques for a Gob-Side Yield Pillar in the Sijiazhuang Coal Mine, China

A New Theoretical Method to Predict Strata Movement and Surface Subsidence due to Inclined Coal Seam Mining

Study on instability mechanisms and control of coal pillar spalling and coal crumbs leakage during working face crossing faults

Experimental Study on the Deformation and Failure Mechanism of Overburden Rock During Coal Mining Using a Comprehensive Intelligent Sensing Method

Construction and Application of an Intelligent Prediction Model for the Coal Pillar Width of a Fully Mechanized Caving Face Based on the Fusion of Multiple Physical Parameters

Surface Subsidence Characteristics of Mining Panel Layout Configuration with Multi-Seam Longwall Mining

Research on the required width of a fault waterproof coal pillar based on underground pressure control theory

Numerical Simulation Study on The Effect of Isolated Coal Pillar Width on The Subsidence Law of Deep Mining

Characteristics of stratum movement induced by downward longwall mining activities in middle-distance multi-seam

Investigation on rational width of coal pillar and roadway support in isolated panel of extra-thick coal seam

A study of surface subsidence and coal pillar safety for strip mining in a deep mine