Abstract:This paper proposes a small coal pillar composite reinforcement support technology with 'two‐way buttressing anchor cable for pressure reinforcement + steel pipe concrete pier column + overhead roof break'. This comprehensive support technology of small coal pillar is proposed to solve the long‐term stability of those coal pillars under the influence of mining, ensure the feasibility of the double roadway layout technology with small coal pillars, maximising the mining efficiency. To solve the problem of controlling the stability of small coal pillars under the mining disturbance of the adjacent working face, the fourth panel 403 and 404 working faces of the Gaojiabao coal mine with two mining roadways is taken as the object of this research. The comprehensive research method of combining mechanical theory analysis, coal dynamic disturbance experiments and field engineering practice was adopted. First, the analysis determined the magnitude and frequency of fracture‐related disturbance loading on the overburden roof of the working face; next, the strain and stress threshold indicators of the coal body, sensitive to the external disturbance load of 103 J magnitude (continuous disturbance deformation), were tested and obtained through a self‐developed rock creep disturbance experimental system, and the stress threshold indicators of coal body specimens sensitive to creep disturbance were defined as the long‐term strength. Then, a coal pillar‐roof mechanics structure model was established in the premining and postmining areas of the working face, and the overlying support pressure on the coal pillar body was analysed. Finally, a small coal pillar composite reinforcement support technology with 'two‐way buttressing anchor cable for pressure reinforcement + steel pipe concrete pier column + overhead roof break' was designed to ensuring that the coal pillar body would not be destabilised by cumulative disturbance and large deformation under disturbance. According postmining area support capacity calculations, the support loading acting on the coal pillar is approximately 17593 kN, with the stress being 2.93 MPa; and the factor of safety is approximately 1.23. After engineering practice application of this approach, the vertical deformation of the small coal pillar body and side heave disturbance deformation were effectively controlled during the working face mining disturbance, the vertical deformation of the reinforced coal pillar was only 187 mm, and the side heave deformation was finally stabilised at approximately 124 mm, which maintained good stability.

Study on instability mechanisms and control of coal pillar spalling and coal crumbs leakage during working face crossing faults

Study on the Mechanism of Coal Pillar Instability in Coal Seam Sections Containing Gangue

Study on the failure mechanism and stability control measures in a large-cutting-height coal mining face with a deep-buried seam

Sensitivity analysis of influencing factors and control technology for coalface failure

Analysis and control of the mechanism of coal pillar sloughing in the shallow buried thick coal seam

Fault instability’s mechanical mechanism and technology of retaining waterproof pillar

Characterizing Coal Pillar Deformation and Air Leakage Pattern During Longwall Face Mining

Instability failure mechanism of coal pillar in deep mine under dynamic disturbance

Study on the disaster caused by the linkage failure of the residual coal pillar and rock stratum during multiple coal seam mining: mechanism of progressive and dynamic failure

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Study on Optimization of Waterproof Coal Pillar in High Angle Normal Fault Floor

Mechanism and Integrated Control of “rib Spalling: Roof Collapse—Support Instability” Hazard Chains in Steeply Dipping Soft Coal Seams

Theoretical and numerical investigations of the floor failure characteristics affected by coal mining near complex fault structures

Study on Cross Main Tunnel Mining Next to Large Fault Structure

Failure mechanism and 3D physical modeling test of coal face pyramid sliding in steeply inclined working face: A case study

Numerical Study on the Characteristics and Control Method of Coal Leakage between Supports in Integrated Mining of Extremely Loose and Soft Coal Seams

Dynamic Failure Risk of Coal Pillar Formed by Irregular Shape Longwall Face: A Case Study

Research on the Mechanism of Coal-Wall Spalling and Flexible Reinforcement in Soft-Coal Seams Based on the Mogi–Coulomb Criterion

Assessment of pillar stability and its control in a double roadway layout

Study on the mechanism of coal pillar breaking and fracture development under repeated mining in a close seam group

Moment Tensor Inversion and Stress Evolution of Coal Pillar Failure Mechanism