Abstract:We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modules, with each module collecting roughly 600 spectra from a robotic fiber positioner at the telescope prime focus. Each spectrograph module will have two visible channels covering wavelength ranges 380 nm - 640 nm and 640 nm - 955 nm, and one near infrared (NIR) channel with a wavelength range 955 nm - 1.26 um. Dispersed light in each channel is imaged by a 300 mm focal length, f/1.07, vacuum Schmidt camera onto a 4k x 4k, 15 um pixel, detector format. For the NIR channel a HgCdTe substrate-removed Teledyne 1.7 um cutoff device is used. In the visible channels, CCDs from Hamamatsu are used. These cameras are large, having a clear aperture of 300 mm at the entrance window, and a mass of ~ 250 kg. Like the two visible channel cameras, the NIR camera contains just four optical elements: a two-element refractive corrector, a Mangin mirror, and a field flattening lens. This simple design produces very good imaging performance considering the wide field and wavelength range, and it does so in large part due to the use of a Mangin mirror (a lens with a reflecting rear surface) for the Schmidt primary. In the case of the NIR camera, the rear reflecting surface is a dichroic, which reflects in-band wavelengths and transmits wavelengths beyond 1.26 um. This, combined with a thermal rejection filter coating on the rear surface of the second corrector element, greatly reduces the out-of-band thermal radiation that reaches the detector.

Optimization and performance of the Robert Stobie Spectrograph Near-InfraRed detector system

Optical performance of prototype horn-coupled TES bolometer arrays for SAFARI

Mid-infrared detector development for the Origins Space Telescope

IO:I: A Near-Infrared Camera for the Liverpool Telescope

NIRPS Front-End: Design, performance, and lessons learned

Evaluating the GeoSnap 13-$μ$m Cut-Off HgCdTe Detector for mid-IR ground-based astronomy

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

Performance of the HgCdTe Detector for MOSFIRE, an Imager and Multi-Object Spectrometer for Keck Observatory

InfraRed On-Detector Guide-Windows in the era of Extremely Large Telescopes

Assessing the Suitability of H4RG Near Infrared Detectors for Precise Doppler Radial Velocity Measurements

Design and Performance of the Upgraded Mid-InfraRed Spectrometer and Imager (MIRSI) on the NASA Infrared Telescope Facility

Characterisation, performance, and operational aspects of the H4RG-15 near infrared detectors for the MOONS instrument

Adaptive optics for high resolution spectroscopy: A direct application with the future NIRPS spectrograph

Design and construction progress of LRS2-B: a new low resolution integral field spectrograph for the Hobby-Eberly Telescope

Optimization of Time- and Code-Division-Multiplexed Readout for Athena X-IFU

In-flight performance and calibration of the Grating Wheel Assembly sensors (NIRSpec/JWST)

Status of SuperSpec: A Broadband, On-Chip Millimeter-Wave Spectrometer

Low Noise Titanium Nitride KIDs for SuperSpec: A Millimeter-Wave On-Chip Spectrometer

Design of Large Low Noise Transition Edge Sensor Arrays for Future FIR Space Missions

The near infrared camera for the Subaru Prime Focus Spectrograph