Abstract:The introduction of gradient structure has been recently reported as a practical way to tailor the mechanical behavior of NiTi alloy while improving its elastocaloric effect simultaneously. In this research, a thermo-mechanically weakly coupled phase-field model considering crystal plasticity is employed to investigate the microscopic mechanisms of the elastocaloric effect related to the gradient structure, especially from the point of view of the two-way interaction between stress and martensite variants. A set of polycrystalline systems are established to accomplish the gradual transition from a fine-grained specimen to a coarse-grained one by the grain-size gradient. The gradually changed mechanical response and phase transformation characteristics during the superelastic simulations embody the effectiveness of the grain structure as a regulator of the material properties. The Brayton cycle simulations conducted next revolve around further validation of the proposed model and variant-related interpretation of the effects of the grain structure. Predictions relevant to histories of stress and temperature agree well with the experimental results, and more remarkably, the linear stress-temperature relationship observed during the stress drop of the first hold in the Brayton cycle conforms perfectly to the classical Clausius-Clapeyron relation. Together with martensite reorientation, the propagating martensite phases, where the increasing non-major variants are necessary complements to the major one preferentially aligned with the external stress, are largely responsible for this stress drop. Regarding the elastocaloric effect, the gradient structures achieve very similar cooling capacity but higher cooling efficiency compared to the coarse-grain one, taking advantage of more martensite, particularly the major variant, produced if provided with the same transformable area (excluding the grain boundaries). Besides, a steeper gradient in structures is prone to alter the composition of martensite variants and more non-major variants are demanded to alleviate the developing deformation mismatch among layers with different grain sizes.

Effect of the laser heat treatment on the formation of the gradient structures in alloys based on Fe – Cr – Ni system

Influence of Deformation and Thermal Effects on the Formation of Metastable Structural States in Fe–18 Cr–10 Ni Alloy

Mechanical Properties of Composite Materials Based on Fe – 18% Cr – 10% Ni Alloy Obtained Using Laser Heat Treatment

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power

Strength–Ductility Mechanism of CoCrFeMnNi High-Entropy Alloys with Inverse Gradient-Grained Structures

Influence of homogenizing annealing on reducing the content of δ-ferrite in high-strength high-chromium martensitic steel grade 07Kh15N5D4B obtained by selective laser alloying

Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties

Exploring the application of laser thermal effect in the multilayer gradient coatings designed by electrochemical deposition: Parameters, advancements, and limitations

Effect of the Post-Production Heat Treatment on Phase Evolution in the Fe3Ni–FeNi Functionally Graded Material: an In-Situ Neutron Diffraction Study

Laser heat treatment of steels and alloys before diffusion welding

Effects of Heat Treatments on Microstructure and Mechanical Properties of Laser Melting Multi-Layer Materials

Effect of heat treatment on structure and mechanical properties of dispersion-hardened iron-based alloys

Influence of the initial structure on the efficiency of laser processing of steel

Laser shock-induced gradient twinning microstructure in AZ31B alloy

Temperature gradient induced tough-brittle transition behavior of a high-strength Al-4.2Mg-0.4Sc-0.2Zr alloy fabricated by laser powder bed fusion additive manufacturing

Effect of Heat Treatment on Gradient Microstructure of AlSi10Mg Lattice Structure Manufactured by Laser Powder Bed Fusion

Effect of Thermal Fields on the Structure of Corrosion-Resistant Steels Under Different Modes of Laser Treatment

Microstructure Evolution of Intermetallics Produced by Laser Powder Deposition

From mechanical behavior and elastocaloric effect to microscopic mechanisms of gradient-structured NiTi alloy: A phase-field study

The Effects of Micro-Segregation on Isothermal Transformed Nano Bainitic Microstructure and Mechanical Properties in Laser Cladded Coatings

Study on the Thermal Behavior and Microstructure of Fe-Based Deposited Layers Prepared by Laser Cladding on Al Substrate