Abstract:With the finite difference method and the coupled mode theory,it was analyzed that photonic crystal fiber(PCF)'s structure parameters affected the adjusting action of long period grating(LPG)'s grating period on the resonant wavelength.The results showed that,for the same kind of PCF,it is feasible to decrease or increase resonant wavelength by increasing or decreasing grating period.If duty cycle f of PCF is increased or decreased,the resonant wavelength can be kept unchanged by decreasing or increasing grating period.If the scale coefficient M of PCF is increased or decreased,the resonant wavelength can be kept unchanged by increasing or decreasing grating period.For the PCF series only with the layer numbers of air hole increased,in the long-wavelength region,the grating period should be increased several μms to keep the resonant wavelength unchanged,while it was just the opposite in the short-wavelength region.The air holes in the inner layers greatly affect the adjusting action of grating period on the resonant wavelength,while the layers outside of the fifth layer affect the action very faintly.Using these regularities,it is portable to choose appropriate grating period,and high-effectively prepare LPG in PCF with appropriate resonant wavelength.

Ultrabroadband tunable long-period fiber grating for stress sensing and optical filtering

Potential Bending Sensor Based On Small-Period Long-Period Gratings

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing

Femtosecond Laser Inscribed Long-Period Gratings in All-Solid Photonic Bandgap Fibers

Deeply-Tapered Ultrashort Long-Period Fiber Grating and Its Application to Ultrasensitive Transverse-Load Sensor

Long Period Gratings in Air-Core Photonic Bandgap Fibers

Ultrasensitive long-period gratings sensor works near dispersion turning point and mode transition region by optimally designing a photonic crystal fiber

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Long-period Grating Fabricated by Periodically Tapering Standard Single-Mode Fiber.

Optical fibre long-period grating sensors: characteristics and application

Chiral long-period gratings: fabrication, highly sensitive torsion sensing, and tunable single-band filtering

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Long-period Grating Fabricated Using Resistive Filament Heating

Programmable Long-Period Grating in a Liquid Core Optical Fiber.

High Sensitivity Chiral Long-Period Grating Sensors Written in the Twisted Fiber

Fabrication of Phase-Shifted Long-Period Fiber Grating and Its Application to Strain Measurement

Ultraviolet-inscribed Long Period Gratings in All-Solid Photonic Bandgap Fibers

Spectral characteristics of helicoidal mechanically-induced long-period fiber grating

Properties of Resonant Wavelength of Long Period Grating in Photonic Crystal Fiber

Long-period grating and its cascaded counterpart in photonic crystal fiber for gas phase measurement