Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Oxide-based thin film transistors for flexible electronics

Metal oxide semiconductor thin-film transistors for flexible electronics

Review of flexible and transparent thin-film transistors based on zinc oxide and related materials

Review of recent progresses on flexible oxide semiconductor thin film transistors based on atomic layer deposition processes

Flexible Oxide Thin Film Transistors, Memristors, and Their Integration

Advances in flexible organic field-effect transistors and their applications for flexible electronics

Strategies for Applications of Oxide-Based Thin Film Transistors

Flexible inorganic oxide thin-film electronics enabled by advanced strategies

Review of recent trends in flexible metal oxide thin-film transistors for analog applications

Flexible Thin-Film Transistor and Integration Strategies for Future Intelligent Displays

20.1: Invited Paper: Research on Oxide Thin Film Transistors for Wearable Sensors

A Review of the Progress of Thin-Film Transistors and Their Technologies for Flexible Electronics

Bendable metal oxide thin-film transistors and circuits for analog electronics applications

Recent Developments of Flexible InGaZnO Thin‐Film Transistors

Printing flexible thin-film transistors

Editorial: High-Performance Organic Thin-Film Transistors

Flexible strategy of epitaxial oxide thin films

Research Progress of p-Type Oxide Thin-Film Transistors

Intrinsically flexible displays: key materials and devices

50‐4: Invited Paper: Low‐Temperature Metal‐Oxide Thin‐Film Transistor Technology and the Realization of Electronic Systems on Flexible Substrates

Transparent Semiconducting Oxide Technology for Touch Free Interactive Flexible Displays