Flame-retardant effect and mechanism of melamine phosphate on silicone thermoplastic elastomer

Dawei Xu,Hongchao Lu,Qiang Huang,Bofu Deng,Li Li

DOI: https://doi.org/10.1039/c7ra12865g

IF: 4.036

2018-01-01

RSC Advances

Abstract:Halogen-free flame retardant – MP was successfully adopted to improve the comprehensive properties of the novel Si-TPE.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Intumescent Flame Retardation and Silane Crosslinking of PP/EPDM Elastomer

Zhengzhou Wang,Shun Zhou,Yuan Hu

DOI: https://doi.org/10.1002/pat.1277

IF: 3.348

2008-01-01

Polymers for Advanced Technologies

Abstract:This study deals with the silane crosslinking and intumescent flame retardation of polypropylene/ethylene-propylene-diene copolymer (PP/EPDM) elastomers. The effect of silane crosslinking on the flame retardancy of the PP/EPDM composites containing melamine phosphate (MP) and dipentaerythritol (DPER) was studied by limiting oxygen index, UL 94 and cone calorimetry tests. The chemical composition of the silane crosslinked and flame retarded PP/EPDM composites treated at different temperatures was studied by X-ray photoelectron spectroscopy and real time Fourier transform infrared (FTIR) spectrometry. Thermal decomposition and crystallization behavior of the PP/EPDM composites were investigated using thermogravimetric analysis and differential scanning calorimetry, respectively. Moreover, the mechanical properties of the composites were also studied. It is found that the flame retardancy, mechanical properties, and thermal decomposition behavior of the composites are influenced by silane grafting and crosslinking. Copyright (C) 2008 John Wiley & Sons, Ltd.
Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

Pin Lv,Zhengzhou Wang,Yuan Hu,Minggao Yu

DOI: https://doi.org/10.1007/s10965-008-9205-3

IF: 3.061

2008-01-01

Journal of Polymer Research

Abstract:The effect of polydimethylsiloxane (PDMS) in intumescent flame retarded polypropylene (PP) containing melamine phosphate (MP) was studied using limiting oxygen index (LOI), UL-94 test, thermogravimetric analysis (TG), real time Fourier transform infrared (FTIR) and pyrolysis/gas chromatogram/mass spectrometry (Py–GC/MS). It was found that the addition of PDMS into the PP/MP composites leads to a decrease in the LOI values of the PP/MP/PDMS composites, and the values increase gradually with the increase of the PDMS content. The UL-94 test results indicate that the PP/MP/PDMS composite with 30% PDMS reaches the V-0 rating compared with no rating of the PP/MP composite at the same MP loading. The water resistance of the PP/MP/PDMS composites was investigated, and the improved water leaching of MP was observed. The TG and RTFTIR results illustrate the thermal stability of the PP/MP composites containing PDMS is improved. Moreover, the pyrolysis of the PP/MP/PDMS composites was studied by the Py–GC/MS method.
Remarkable effects of silicone rubber on flame retardant property and mechanical properties of crosslinked high‐density polyethylene/bio‐based magnesium phosphate flame retardant (MHPA) composite

Xi Feng,Zhengyu Wang,Hongli Ma,Bo Dang,Jianxi Li

DOI: https://doi.org/10.1002/vnl.22005

2023-04-20

Journal of Vinyl and Additive Technology

Abstract:The electron beam irradiated crosslinked HDPE/SR/MHPA composite material has low peak heat release rate and high mechanical properties, and after combustion, it produces a good expanded carbon layer. In this paper, a new bio‐based flame retardant MHPA was prepared by the reaction of magnesium hydroxide (MH) and phytic acid (PA). Then the crosslinked high‐density polyethylene (HDPE) flame‐retardant composite was prepared by adding it and silicone rubber (SR) into HDPE and using electron beam irradiation. The test results of limiting oxygen index (LOI) and cone calorimeter test (CCT) show that the combination of MHPA and SR can increase the flame retardancy and smoke suppression performance of HDPE. The LOI of HDPE composite with 10 parts of SR is 28.3%, and its pHRR, THR and TSP values are reduced to 454.1 kW/m2, 99.7 MJ/m2 and 8.3 m2, respectively, which is because MHPA and SR jointly promote the formation of continuous and high‐density carbon slag in the combustion process of HDPE and inhibit the penetration of flame. In addition, the HDPE composite with 10 parts of SR has significant tensile strength, elongation breaking strength and tear strength, because SR can produce continuous stable structure with HDPE after irradiation and crosslinking. Therefore, this study verified that MHPA and SR together can effectively improve the flame retardancy, smoke suppression and mechanical properties of HDPE composite.

chemistry, applied,materials science, textiles,polymer science
Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Weidi He,Ying Zhou,Xiaolang Chen,Jianbing Guo,Dengfeng Zhou,Shaopeng Chen,Meng Wang,Lingtong Li

DOI: https://doi.org/10.3390/polym11010050

IF: 5

2018-12-31

Polymers

Abstract:In this work, the ethylene-propylene-diene monomer/polypropylene (EPDM/PP) thermoplastic elastomer filled with intumescent flame retardants (IFR) is fabricated by melting blend. The IFR are constituted with melamine phosphate-pentaerythritol (MP/PER) by compounding and reactive extruding, respectively. The effects of two kinds of MP/PER with different contents on the thermal stability, flame retardancy, and mechanical properties of materials are investigated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94, cone calorimeter test (CCT), and scanning electron microscopy (SEM). FTIR results show that the reactive extruded MP/PER partly generates melamine pyrophosphate (MPP) compared with compound masterbatches. TGA data indicate that the best thermal stability is achieved when the molar ratio of MP/PER reaches 1.8. All the reactive samples show a higher flame retardancy than compound ones. The CCT results also exhibit the same trend as above in heat release and smoke production rate. The EPDM/PP composites filled with 30 and 35% reactive MP/PER exhibit the improved flame retardancy but become stiffer and more brittle. SEM photos display that better dispersion and smaller particle size are obtained for reactive samples.

polymer science
Remarkable effects of silicone rubber on flame retardant property of high-density polyethylene/magnesium hydroxide composites

Yue Han,Siyi Xu,Aosong Wang,Peng Cheng,Jianxi Li,Liguo Shen,Hanzhou Liu

DOI: https://doi.org/10.1016/j.polymdegradstab.2022.110061

IF: 5.204

2022-09-01

Polymer Degradation and Stability

Abstract:In this study, silicone rubber (SR) was introduced into high-density polyethylene/magnesium hydroxide (HDPE/MH) composites by melt blending, and the electron beam irradiation was used to prepare the irradiation crosslinked flame retardant HDPE composites. The changes of properties of the samples were investigated by melt index test (MI), mechanical property test, thermal stability test (TG/DTG), oxygen index test (LOI) and cone calorimetry (CCT). MI test results indicated that SR can increase the internal lubricity of HDPE composites. The morphology results showed that the SR can promote the interfacial compatibility between MH and HDPE. The test results of mechanical properties further revealed that the addition of SR can effectively improve the continuity between MH and HDPE, which was evidenced by the 240 % increasing of the elongation at break. TGA test results showed that with the continuous increase of SR, the mass loss rate (LR) decreased rapidly, and the residue content increased. When the addition of SR reached 7.5 phr, the LOI was promoted by 27.4 %. CCT results indicated that the addition of SR can effectively inhibit the heat release rate (HRR) and total heat release (THR), but had little effect on the total smoke release (TSP). When 10 phr of SR were added, the content of residue can reach up to 37 %, and the expansion height can reach to 2.2 cm. Conclusively, the SR contributed to significantly synergistic flame retardant property to HDPE composites.

polymer science
Reprocessable Flame Retardant Silicone Polyurethane Based on Dynamic Phenylborate Ester Covalent and N–P–Si Synergistic Effect

Xie Li,Qiuru Bao,Kexuan Chen,Ren He,Yuan Liu,Qi Wang

DOI: https://doi.org/10.1021/acssuschemeng.2c03717

IF: 8.4

2022-10-19

ACS Sustainable Chemistry & Engineering

Abstract:The silicone thermoplastic elastomer is highly attractive in various areas for good mechanical strength and aging resistance. However, its intrinsically high flammability limits its practical applications. Meanwhile, as a typical polymer material, its irreversible cross-linking structure makes it difficult to recycle and reprocess; a great deal of discarded silicone materials can pose a waste of resources and environmental problems. Herein, it is of great significance to prepare an intrinsic flame retardant (FR) and reprocessable silicone polyurethane (STPU). In this study, we introduce phosphorus-containing compounds (MDP) and a dynamic phenylborate ester (HDPM) bond into traditional silicone’s molecular chain structure by in situ polymerization method, which endows the material with excellent flame retardance and reprocessing properties, respectively. The resulting STPU shows a limited oxygen index (LOI) value of 26.1% and reaches at VTM-0 rating. Furthermore, by regulating the decomposition and reconstruction of the phenylborate ester structure, STPU remain the initial tensile strength and keep 87.58% of tensile strain after twice reprocessing. This high-performance sustainable STPU materials hold great promise for fire safety behavior and reutilization in practical application.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Melamine-containing polyphosphazene wrapped ammonium polyphosphate: A novel multifunctional organic-inorganic hybrid flame retardant

Shuilai Qiu,Chao Ma,Xin Wang,Xia Zhou,Xiaming Feng,Richard K K Yuen,Yuan Hu

DOI: https://doi.org/10.1016/j.jhazmat.2017.11.018

2018-02-15

Abstract:To achieve superior fire safety epoxy resins (EP), a novel multifunctional organic-inorganic hybrid, melamine-containing polyphosphazene wrapped ammonium polyphosphate (PZMA@APP) with rich amino groups was prepared and used as an efficient flame retardant. Thanks to the cross-linked polyphosphazene part, PZMA@APP exhibited high flame retardant efficiency and smoke suppression to the EP composites. Thermogravimetric analysis indicated that PZMA@APP significantly enhanced the thermal stability of EP composites. The obtained sample passed UL-94 V-0 rating with 10.0wt% addition of PZMA@APP. Notably, inclusion of incorporating PZMA@APP leads to significantly decrease on fire hazards of EP, for instance, bring about a 75.6% maximum decrease in peak heat release rate and 65.9% maximum reduction in total heat release, accompanied with lower smoke production rate and higher graphitized char layer. With regards to mechanical property, the glass transition temperature of EP/PZMA@APP10.0 was as high as 184.5°C. In particular, the addition of PZMA@APP did not worsen the mechanical properties, compared to pure APP. It was confirmed that the participation of melamine-containing polyphosphazene could significantly enhance the quality of char layer and thereby resulting the higher flame retardant efficiency of PZMA@APP.
Fabrication of melamine trimetaphosphate 2D supermolecule and its superior performance on flame retardancy, mechanical and dielectric properties of epoxy resin

Peifan Qin,Deqi Yi,Jianwei Hao,Xinming Ye,Ming Gao,Tinglu Song

DOI: https://doi.org/10.1016/j.compositesb.2021.109269

2021-11-01

Abstract:To improve the flame retardancy, mechanical and dielectric properties of epoxy resin (EP), a novel two-dimensional (2D) supermolecule, melamine trimetaphosphate (MAP), is successfully synthesized using melamine (MA) and sodium trimetaphosphate (STMP) in aqueous solution. Its chemical, crystalline structure and thermal stability are thoroughly characterized by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), atom force microscope (AFM) and thermo-gravimetric analysis (TGA) techniques. Then EP-MAP composites are prepared, and their morphologies are assessed by SEM, thermal stability by TGA, fire retardancy by limiting oxygen index test (LOI), vertical burning standard test (UL-94), and cone calorimeter tests, mechanical properties by stress strain tests, and dielectric properties by impedance analyzer. The results show that the MAP layers are formed by a 3:1 combination of MA and STMP rings via intermolecular hydrogen bonding. The MAP sheets with thickness around 2 nm show high thermal stability. Compared to pure EP, the thermal stability of EP-MAP is improved, and EP-MAP composite can achieve 30.0% of LOI value and UL-94 V-0 rating with only 4% MAP. Meanwhile its peak of heat release rate is reduced by 65.6% and the smoke release is highly suppressed in cone calorimeter test. The typical intumescent flame retardancy effect and phosphorus-nitrogen (PP–N) effect during the combustion of EP-MAP are demonstrated by X-ray photoelectron spectroscopy (XPS) and thermogravimetric analyzer coupled with Fourier transform infrared analysis of evolving products (TGA-FTIR). Due to the uniform dispersion of MAP in EP matrix, the mechanical and dielectric properties of EP-MAP are also significantly enhanced.

engineering, multidisciplinary,materials science, composites
Thermal management ability and flame retardancy of silicone rubber foam filled with flame retardant phase change capsules

Zetian Zhang,Weining Du,Yang Liu,Ze Liang,Fufen Li,Yong Yong,Zhengjun Li

DOI: https://doi.org/10.1016/j.clay.2023.106977

IF: 5.907

2023-05-13

Applied Clay Science

Abstract:A novel phase change capsule with layered double hydroxide (LDH) modified SiO 2 shell (named M-EPCM) was designed and prepared, which was used to improve the thermal regulation performance and flame retardancy of silicone rubber foam (SRF). The SRF-3 composite containing 18 wt% M-EPCM presented greatly improved thermoregulation ability, and excellent thermal reliability even after 100 cycles. Besides, SRF-3 also exhibited excellent flame retardancy, with the limiting oxygen index exceeding 31.0%, reduced peak heat release rate (36.4%) and low total smoke yield (13.8 m 2 ). The flame retardant mechanism analysis revealed that barrier effect, catalytic crosslinking and polyaromatic reaction provided by LDH played an important role. Moreover, SRF composites have outstanding mechanical properties, especially SRF-3 which showed a 150% and 85% increase in tensile strength and compression strength compared with pure SRF, respectively. This article provides a new idea for further application of LDH in the field of thermal management.

mineralogy,chemistry, physical,materials science, multidisciplinary
A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Shun Zhou,Zhengzhou Wang,Zhou Gui,Yuan Hu

DOI: https://doi.org/10.1002/app.27727

IF: 3

2008-01-01

Journal of Applied Polymer Science

Abstract:Flammability of polypropylene / ethylene-propylene-diene copolymer (PP/EPDM) filled with melamine phosphate (MP) and pentaerythritol phosphate (PEPA) was studied by limiting oxygen index (LOI), UL 94, and cone calorimetry. The thermal degradation of the composites was investigted using thermogravimetric analysis (TG) and real-time Fourier transform infrared spectrum (RT-FTIR), and the mechanical properties of the materials were also studied. It had been found that the PP/EPDM/PEPA/MP composites (PEPM series) showed better flame retardancy than that of the PP/EPDM composites containing MP or PEPA. TG and RT-FTIR Studies indicated that the interaction occurs among MP, PEPA, and PP/EPDM. The incorporation of the flame retardants deteriorated the mechanical properties of the materials. (C) 2008 Wiley Periodicals, Inc. J Appl Polym Sci 110: 3804-3811,2008
Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Chen Yu,Wei Wu,Yuhua Zhong,M. Ruan,C. Jiang

DOI: https://doi.org/10.1002/PC.23227

2016-03-01

Abstract:In this article, the nanocomposites thermoplastic polyester-ether elastomer (TPEE) with phosphorous–nitrogen (P–N) flame retardants and montmorillonite (MMT) was prepared by melt blending.The fire resistance of nanocomposites was analyzed by limiting oxygen index (LOI) and vertical burning (UL94) test. The result shows that the flame retardants containing P–N increased the LOI of the material from 17.3 to 27%. However, TPEE containing P–N flame retardants just got UL94 V-2 ranking, which resulted in the flaming dripping phenomenon. On the other hand, TPEE containing P–N flame retardant and organic-modified montmorillonite(o-MMT) achieved UL94 V-0 rating for the special microstructure. The XRD and TEM morphology has demonstrated that the formation of multi-ordered structure regarding restricted segmental motions at the organic–inorganic interface and stronger interactions between the clay mineral layers and the polymer chains. The structure was supported by the results of rheological properties and DSC analysis. The thermal degradation and char residue characterization was studied by thermal gravimetric analysis (TGA) and SEM-EDX measurements, respectively. The TGA and SEM-EDX have demonstrated that o-MMT results in the increase of char yield and the formation of the thermal stable carbonaceous char. POLYM. COMPOS., 2014. © 2014 Society of Plastics Engineers

Engineering,Materials Science
Fabrication of Flame Retardant Poly(methyl methacrylate) with Excellent Comprehensive Properties Based on a New Phosphorus-silicon-Nitrogen-Synergistic System

Wenzong Xu,Yaocheng Zhou,Ziwei Bian,Ziyi Xuan,Shiyuan Yu

DOI: https://doi.org/10.1016/j.polymdegradstab.2024.110739

IF: 5.204

2024-03-14

Polymer Degradation and Stability

Abstract:In general, the addition of phosphate ester flame retardants can improve the flame retardancy of polymethyl methacrylate (PMMA), but the flame retardant efficiency is low when phosphate ester is used alone and the tensile strength and hardness of the material are reduced. It is a challenge to improve the flame retardancy of PMMA while maintaining its inherent mechanical properties. In this study, a polyphosphate-coated silica (SZP) was prepared, which was compounded with dimethyl methylphosphonate (DMMP). At the same time, methacrylamide (MAM), which can be copolymerized with PMMA, was introduced to construct a synergistic phosphorus-nitrogen-silicon flame retardant system. The three components can work together in the gas phase and condensed phase. The results showed that when 12.5% DMMP, 5% MAM and 2.5% SZP were added, the composite material had the best comprehensive performance, its limiting oxygen index (LOI) reached 25.1%, and its total heat release was only 70 % of the pure sample. More importantly, the addition of DMMP would significantly reduce the mechanical properties of PMMA. The introduction of SZP and MAM alleviated this problem. Compared with the pure sample, the mechanical properties of PMMA7 did not decrease but increased slightly. The flame retardant mechanism was also analyzed. This study provides a new idea for the industrialization of flame retardant PMMA.

polymer science
The encapsulation of intumescent flame retardants by poly-siloxane for thermoplastic polyolefin: Fire safety and water resistance

Shuheng Wang,Yichong Jiang,Yujuan Meng,Yuchun Li,Zhongqiang Han,Xiaodong Liu,Hongfei Li,Jun Sun,Bin Fei,Xiaoyu Gu,Sheng Zhang

DOI: https://doi.org/10.1016/j.polymdegradstab.2021.109561

IF: 5.204

2021-06-01

Polymer Degradation and Stability

Abstract:<p>The flammability of thermoplastic polyolefins (TPO) is a prior concern related to fire disasters. The fire safety strategy for TPO has not been settled because of serious waterproof property deteriorations caused by the presence of flame retardant additives. This work reported an encapsulation of conventional intumescent flame retardant (IFR) additives by a poly-siloxane (Si-IFR) and its application in TPO composites. The fire behavior characterization revealed that the peak heat release rate and smoke density of the TPO/Si-IFR sample was decreased by 26.5% and 24.0% respectively compared with that of the TPO/IFR sample. The flame retardant mechanism analysis suggested that the poly-siloxane coated IFR formed compact char layers through Si-O structures and nano-silica attachment on the carbonous layer. Notably, the flame retardancy and mechanical property for the TPO/Si-IFR sample were almost unchanged after being soaked in water for 7 days at 70°C. Consequently, this work proved that the poly-siloxane encapsulated IFR was an effective additive for producing flame retardant and water resistant TPO composites.</p>

polymer science
Preparation and properties of a single molecule intumescent flame retardant

Xilei Chen,Chuanmei Jiao,Shaoxiang Li,Yuan Hu

DOI: https://doi.org/10.1016/j.firesaf.2013.01.011

IF: 3.78

2013-01-01

Fire Safety Journal

Abstract:Melamine salt of pentaerythriol phosphate (MPP), as a new single molecule intumescent flame-retardant, was prepared from pentaerythritol, phosphoric acid, and melamine, and then incorporated into polypropylene (PP) with organic montmorillonite (OMT) to obtain flame retardant PP/MPP/OMT composites. The flammability and combustion behavior of flame retardant PP composites were characterized by using LOI, UL-94 test, and cone calorimeter, respectively. The results showed that the flame retardant properties of the composite containing 29.0wt% MPP and 1.0wt% OMT are the best among all the composites. The digital photographs after cone calorimeter test demonstrated that moderate OMT could promote to form the homogenous and compact intumescent char layer.
Novel halogen-free flame-retardant thermoplastic elastomer material and preparation method thereof

丁文科,沙月华

2012-02-28

Abstract:The invention discloses a novel halogen-free flame-retardant thermoplastic elastomer material and a preparation method thereof. The TPEE thermoplastic elastomer material comprises 30-50 parts of SEBS, 15-30 parts of polyphenyl ether, 2-10 parts of polyolefin, 2-5 parts of polyolefin elastomer, 10-20 parts of PEPA secondary phosphonate, 5-15 parts of secondary flame retardant, 1-5 parts of flame-retardant synergist, 10-40 parts of white oil and 1-5 parts of other aids. The method comprises the following steps: feeding raw materials SEBS, a part of white oil, polyphenyl ether, polyolefin, secondary flame retardant, flame-retardant synergist and other aids into a high-speed stirrer, keeping the temperature at 40-100 DEG C, stirring at a high speed, mixing, feeding the materials into a screw rod through a main feeding system of a double-screw extruder, and feeding the PEPA secondary phosphonate and the residual white oil into the double-screw extruder in a feed mode, and blending and pelleting to form the material. The obtained flame-retardant TPE elastomer has good mechanical property and resilience force and can pass the UL 94V-0 flame-retardant level.

Engineering,Materials Science
An Eco-Friendly, Bio-Inspired and Synergistic Flame Retardant System with Outstanding Water Tolerance and Ultra-Low Addition for Silicone Rubber

Weihong Chai,Xinying Su,Yurou Xia,Meihuan Gao,Yingge Li,Chenchen Liao,Zaihang Zheng

DOI: https://doi.org/10.2139/ssrn.4147035

2022-01-01

SSRN Electronic Journal

Abstract:To address the bottleneck problem for flame-retarding silicone rubber (SR) in poor water resistance and low efficiency, a halogen-free and synergistic system was fabricated by the introduction of hydrophobic melamine polyphosphate (MPP)-intercalated layered double hydroxide (P-MPP@LDH) and expandable graphite (EG) in this paper. Dramatically, the LOI of the composite (SR/P-MPP@LDH2.5/EG2.5) can reach as high as 36.4% with UL-94 V-0 rating when the total flame retardant loadings were only 5 phr, revealing the superior efficiency of the novel system. Compared with neat SR, the fire risk of SR composites is observably decreased given cone calorimeter tests. Significantly, bio-inspired hydrophobic modification is feasible for the excellent balance in simultaneously improving the flame retardancy, water resistance, and mechanical properties of SR in one system. Based on the residue and thermal degradation analysis, the effective flame retardant mechanism for SR composites can be attributed to the joint effect of LDH-catalyzed char-formation and physicochemical synergistic intumescence barrier. Therefore, this paper has provided a new and effective strategy to achieve the goal of flame retardancy with high performance in SR. And our work provides a new choice for designing and applying rubber composite materials in buildings.
Improving the flame retardancy of PET fiber by constructing the carbon microspheres based melamine polyphosphate powder

Baoxia Xue,Ruihong Qin,Mingqiang Shao,Sha Li,Mei Niu

DOI: https://doi.org/10.1080/00405000.2019.1655831

2019-08-23

Abstract:Carbon microspheres (CMSs) as carbon source, melamine phosphate (MP) as acid source and gas source, the integrated CMSs based MP composites (SiMP-CMSs) was in-situ prepared to improve the flame retardancy of PET fiber. A series of SiMP-CMSs/PET fiber were prepared by the melt spinning method. By investigating the thermal stability, flame retardancy, flame-retardant mode, crystallization and orientation degree of PET composite fiber, the results showed that, with the addition of 0.9 wt% SiMP-CMSs, the LOI value and vertical combustion grade of SiMP-CMSs/PET composite fiber was 27.4% and B1 level. The main flame-retardant mode of SiMP-CMSs/PET fiber was 31.33% physical barrier, 36.04% flame inhibition and 11.12% catalytic charring. The thermal decomposition temperature was delayed, and the residual amount increased from 11.34% to 16.13%. With the accelerated crystallization rate and the increased grain orientation, the aggregated structure of SiMP-CMSs/PET fiber was also optimized.
Fire behavior and mechanical properties of phosphorus-containing silica gel coated ammonium polyphosphate as fire retardants in thermoplastic polyurethane (TPU)

Ran Zheng,Mengqi Li,Yajun Chen,Fenghao Hao,Bo Xu

DOI: https://doi.org/10.1007/s10965-023-03778-4

IF: 3.061

2023-09-30

Journal of Polymer Research

Abstract:To enhance its properties, ammonium polyphosphate (APP) was subjected to modification using a synthesized phosphorus-containing silica gel, resulting in MAPP. Ammonium polyphosphate (APP) was modified by synthesized phosphorus-containing silica gel, resulting in MAPP, which was then used to form thermoplastic polyurethane composites. MAPP exhibited better thermal stability with a smaller dispersion size, lower initial decomposition temperature and better resistance to heat at high temperatures than APP. At the same time, MAPP showed more obvious advantages in improving the char yield, flame retardant performance and mechanical properties of TPU. TPU/5%MAPP showed a limiting oxygen index of 29.1% during burning tests, significantly better than TPU/5%APP (27.3%). The cone calorimeter test results also indicated that the incorporation of MAPP resulted in a significant reduction in key parameters such as peak heat release rate, total heat release, and total smoke release and an increase of the char yield of TPU composite. The TG result showed that the T max of the TPU/5%MAPP composite increased and the mass loss rate decreased compared with that of TPU/5%APP. Moreover, the tensile strength of the TPU/5%MAPP composite increased by 18.5% compared with the TPU/5%APP composite due to the improved dispersibility of MAPP than APP. An analysis of the fire resistance mechanism showed that the improved flame retardance in the TPU/5%MAPP composite resulted from the structural changes in the char residue. This study provides an efficient and extensible approach for the synthesis of high-performance flame retardant TPU materials.

polymer science
A Series of Novel Flame Retardants Produced with Nanosilica, Melamine, and Aluminum Diethylphosphinate to Improve the Flame Retardancy of Phenolic Resin

Ru Zhou,Xiaoyan Sun,Juan Xie,Gang Ma,Wen-Juan Li,Jun-Cheng Jiang,Chi-Min Shu

DOI: https://doi.org/10.1021/acsomega.1c07246

IF: 4.1

2022-01-01

ACS Omega

Abstract:To facilitate the flame retardancy of phenolic resin (PF), a series of novel flame retardants with nano-SiO2, melamine, and aluminum diethylphosphinate (ADP) were freshly prepared and tested. A thermogravimetric analysis, cone calorimeter, and scanning electron microscopy were employed to determine the thermal decomposition, flame retardancy, combustion properties, and structure of the carbon residue layer of PF. The pyrolysis kinetic parameters of modified PF were then computed, and the pyrolysis process was appraised. The results indicated that when 1.5 wt % of nano-SiO2, 3 wt % of melamine, and 15 wt % of ADP were added to PF, the limiting oxygen index value reached 39.6%, and UL-94 passed the V-0 level. A substantial synergistic effect was also observed. The thermogravimetric analysis revealed that the char residue at 800 °C reached 59.93 wt %. Furthermore, in the cone calorimeter test, the total thermal release and thermal release rate decreased to 30.7 MJ/m2 and 105.7 kW/m2, respectively.
Preparation of aluminum diethyl hypophosphite intercalation‐modified montmorillonite AlPi‐MMT and its effect on the flame retardancy and smoke suppression of thermoplastic polyester elastomer

Zhengyi Wang,Wei Wu,Wenxue Zhang,Hui Shen,Yanling Feng,Jianshuo Li

DOI: https://doi.org/10.1002/app.55103

IF: 3

2023-12-26

Journal of Applied Polymer Science

Abstract:Abstract An aluminum diethyl hypophosphite intercalation‐modified montmorillonite flame retardant (AlPi‐MMT) is successfully prepared and characterized by FT‐IR, SEM, and X‐ray diffraction. It is found that thermoplastic polyester elastomer (TPEE) composites incorporating 15 wt% AlPi‐MMT flame retardant exhibited better char formation and flame retardant properties compared to those incorporating 15 wt% (4:1, w:w) AlPi and MMT. And the char residual of TPEE/AlPi‐MMT at 700°C is 16.17%, which is higher than that of TPEE/AlPi‐MMT at 13.94%. and the former can pass UL‐94 V‐0 rating test while the latter can only pass UL‐94 V‐1 rating test. Afterwards, the combustion performance of TPEE composites is characterized, and it is found that the heat release and smoke release of TPEE/AlPi‐MMT are greatly reduced compared with those of pure TPEE and TPEE/AlPi/MMT, which is a flame retardant and smoke suppressant TPEE composite. Finally, by analyzing the residual char morphology and elements of TPEE composites after combustion, the mechanism of the flame retardant AlPi‐MMT to promote char formation and flame retardancy is demonstrated.

polymer science

Flame-retardant effect and mechanism of melamine phosphate on silicone thermoplastic elastomer

Intumescent Flame Retardation and Silane Crosslinking of PP/EPDM Elastomer

Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

Remarkable effects of silicone rubber on flame retardant property and mechanical properties of crosslinked high‐density polyethylene/bio‐based magnesium phosphate flame retardant (MHPA) composite

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Remarkable effects of silicone rubber on flame retardant property of high-density polyethylene/magnesium hydroxide composites

Reprocessable Flame Retardant Silicone Polyurethane Based on Dynamic Phenylborate Ester Covalent and N–P–Si Synergistic Effect

Melamine-containing polyphosphazene wrapped ammonium polyphosphate: A novel multifunctional organic-inorganic hybrid flame retardant

Fabrication of melamine trimetaphosphate 2D supermolecule and its superior performance on flame retardancy, mechanical and dielectric properties of epoxy resin

Thermal management ability and flame retardancy of silicone rubber foam filled with flame retardant phase change capsules

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Fabrication of Flame Retardant Poly(methyl methacrylate) with Excellent Comprehensive Properties Based on a New Phosphorus-silicon-Nitrogen-Synergistic System

The encapsulation of intumescent flame retardants by poly-siloxane for thermoplastic polyolefin: Fire safety and water resistance

Preparation and properties of a single molecule intumescent flame retardant

Novel halogen-free flame-retardant thermoplastic elastomer material and preparation method thereof

An Eco-Friendly, Bio-Inspired and Synergistic Flame Retardant System with Outstanding Water Tolerance and Ultra-Low Addition for Silicone Rubber

Improving the flame retardancy of PET fiber by constructing the carbon microspheres based melamine polyphosphate powder

Fire behavior and mechanical properties of phosphorus-containing silica gel coated ammonium polyphosphate as fire retardants in thermoplastic polyurethane (TPU)

A Series of Novel Flame Retardants Produced with Nanosilica, Melamine, and Aluminum Diethylphosphinate to Improve the Flame Retardancy of Phenolic Resin

Preparation of aluminum diethyl hypophosphite intercalation‐modified montmorillonite AlPi‐MMT and its effect on the flame retardancy and smoke suppression of thermoplastic polyester elastomer