Abstract:Flame-retardant polypropylene (PP) samples were in situ compatibilized with maleic anhydride grafted PP. Compatibilization reaction was verified by an IR spectrum and gel content measurements. Electron microscopy images showed that compatibilization could considerably reduce the size of the flame-retardant domains, control the phase morphology, and improve the interfacial adhesion between PP and intumescent flame retardant (IFR) with different IFR loading levels. The limiting oxygen index (LOI) of flame-retardant PP increased to different extents after compatibilization, indicating an improvement in the flame retardancy. Compatibilization enhanced the thermal stability to some extent and remarkably delayed thermal oxidative degradation of flame-retardant PP. For PP containing 20 wt % flame retardant, the temperature at which the maximum weight loss rate occurred was enhanced by about 99 degrees C after compatibilization. The storage modulus and glass transition temperatures were elevated to different extents. Tensile strengths of samples reduced in the presence of flame retardant alone but in the additional presence of compatibilizer were restored to levels similar to those of pure PP. Elongation-at-break values, however, showed IFR concentration-dependent reductions that were less for compatibilized samples. Furthermore, the complex viscosity of a compatibilized PP melt turned slightly smaller, which is favorable to melt processing.

Intumescent Flame Retardation and Silane Crosslinking of PP/EPDM Elastomer

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

A Novel Halogen‐free Intumescent Flame Retardant Containing Phosphorus and Nitrogen and Its Application in Polypropylene Systems

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Synergistic Effects of Cerium Phosphate and Intumescent Flame Retardant on EPDM/PP Composites

Flammability, thermal stability, and mechanical properties of ethylene‐propylene‐diene monomer/polypropylene composites filled with intumescent flame retardant and inorganic synergists

Flammability and Thermal Degradation of Flame Retarded Polypropylene Composites Containing Melamine Phosphate and Pentaerythritol Derivatives

Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene with Mp/Tpmp

Study on the flammability and thermal degradation of a novel intumescent flame retardant EPDM composite

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

Preparation of Silane Precursor Microencapsulated Intumescent Flame Retardant and Its Application in Polypropylene Composites

Investigation of Novel Intumescent Flame Retardant Low‐density Polyethylene Based on SiO2@MAPP and Double Pentaerythritol

Flame Retardation and Char Formation Mechanism of Intumescent Flame Retarded Polypropylene Composites Containing Melamine Phosphate and Pentaerythritol Phosphate

Flammability and Thermal Properties of a Novel Intumescent Flame Retardant Polypropylene

Burning behavior analysis of polypropylene composite containing poly-siloxane encapsulated expandable graphite

Preparation and properties of a single molecule intumescent flame retardant