Abstract:A novel intumescent flame retardant (IFR) system consisting of a novel char forming agent (CFA), modified ammonium polyphosphate (MAPP), a synergistic agent (4A zeolite) and an antidripping agent (SN3300) was used in an intumescent flame retardant polypropylene film (IFR-PP film). The original ammonium polyphosphate (OAPP) was modified by octadecylamine to enhance its compatibility with the PP matrix. According to the results obtained from the flame retardancy tests, MAPP had a higher efficiency than OAPP, and the IFR-PP film without the antidripping agent reached a high limiting oxygen index (LOI) value, but it failed to pass UL-94 VTM-0 rating (0.2 mm). The reasonable loading of SN3300 was 0.10~0.15 wt.% (26 wt.% loading of IFR). Greater or smaller loadings did not help the samples to pass VTM-0 rating, and even deteriorated the flame-retardancy of the film. Based on thermogravimetric analytical data, the IFR enhanced the thermal stability of composites at high temperature and effectively increased the char residue. The cone results demonstrated that the IFR could reduce the flammability of PP films based on reduced heat release rate (HRR), total heat release (THR), smoke production rate (SPR) and total smoke production (TSP); also IFR containing MAPP became more effective in reducing smoke release than one containing OAPP The mechanical properties test results showed that films containing MAPP had better tensile strength and tear strength. The morphological structures observed by scanning electron microscopy (SEM) showed that MAPP had much better compatibility with a PP matrix than OAPP, and it made the char layer become more homogeneous and dense.

Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene with Mp/Tpmp

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Flammability and Thermal Properties of a Novel Intumescent Flame Retardant Polypropylene

Flammability and Thermal Degradation of Flame Retarded Polypropylene Composites Containing Melamine Phosphate and Pentaerythritol Derivatives

A new intumescent flame-retardant: preparation, surface modification, and its application in polypropylene

Combustion Behavior of Intumescent Flame Retardant Polypropylene Composites

Preparation and Flame Retardancy of Intumescent Flame-Retardant Polypropylene

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

A Intumescent Flame-Retardant Polypropylene System and Its Burning Behaviors

Thermal Degradation and Combustion Behavior of Novel Intumescent Flame Retardant Polypropylene with N-alkoxy Hindered Amine

Thermal Degradation and Combustion Behaviors of Flame-Retardant Polypropylene/Thermoplastic Polyurethane Blends

A novel highly efficient intumescent flame-retardant polypropylene: Thermal degradation, flame retardance and mechanism

Flame Retardant and Thermal Pyrolytic Behaviour of PP Flame-Retarded with MPP/PER/P System

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Flame Retardant Mechanism of a Novel Intumescent Flame Retardant Polypropylene

Investigation on Flame Retardancy and Antidripping of New Intumescent Flame Retardant Polypropylene Film

Study on Thermal Decomposition of Intumescent Fire-Retardant Polypropylene by TG/Fourier Transform Infrared

Preparation and properties of flame retardant polypropylene with an intumescent system encapsulated by thermoplastic polyurethane

Study on PP Flame Retarded with Aryl Phosphate and Intumescent Flame Retardant Compound

Intumescent Flame-retardant Modification of Polypropylene/Carbon Fiber Composites