Abstract:Filling ability is one of the prominent rheological properties of the self-compacting concrete (SCC), which has been studied in this research work deploying the functional behavior of the concrete through the studied funnel apparatus using the coupled ANSYS-SPH interface. Seven (7) model cases were studied and optimized. The aim of this numerical study is to propose a more sustainable mix of coarse and fine aggregates proportion that allows for most minimum flow time to enhance a more efficient filling of forms during concreting. The maximum size of the coarse aggregates considered is 20 mm and that of the fine aggregates is below 4 mm. The Bingham model properties for the multiphysics (SPH)-ANSYS models' simulation are; viscosity = 20 ≤ μ ≤ 100 and the yield stress = 50 ≤ τ 0 ≤ 200 , standard flow time, t (s) ranges; 6 ≤ t ≤ 25 and the funnel volume is 12 L. The minimum boundary flow time, which represents the time it takes for the SCC to completely flow through a specified distance, typically measured in seconds was modeled for in the seven (7) model cases. The second case with 40% coarse mixed with 60% fine completely flowed out in 16 s, thus fulfilling the minimum flow time. This minimum flow time was considered alongside other relevant parameters and tests, such as slump flow, passing ability, segregation resistance, and rheological properties (stresses), to comprehensively assess the filling ability of SCC in this model. By considering these factors and the optimized mix (40%C + 60%F:16s), engineers and researchers can optimize the SCC mix design to achieve the desired flowability and filling performance for their specific construction applications. The multiphase optimized mix was further simulated using the coupled interface of the ANSYS-SPH platform operating with the CFX command at air temperature of 25 °C. The results show energy reduction jump at the optimized flow time. Ideally, the mix, 40%C + 60%F:16s has been proposed as the mix with the most efficient flow to achieve the filling ability for sustainable structural concrete construction.

3D Simulation of Self-Compacting Concrete Flow Based on MRT-LBM

Lattice Boltzmann-Discrete Element Modeling Simulation of SCC Flowing Process for Rock-Filled Concrete

A CFD SIMULATION OF SELF-COMPACTING CONCRETE BASED ON HERSCHEL-BULKLEY RHEOLOGICAL MODEL

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh

Numerical Modelling of Flow Performance of Fresh Concrete Considering Rheological Characteristics

Simulations of Bingham Plastic Flows with the Multiple-Relaxation-time Lattice Boltzmann Model

A Reaction-Diffusion Modeling of Carbonation Process in Self-Compacting Concrete

Numerical Modeling of Self-Compacting Mortar Flow Using Discrete Element Method

Numerical simulation on slump test of fresh concrete based on lattice Boltzmann method

Simulation of V-tunnel test for fresh concrete on the basis of lattice Boltzmann method

Flow behaviors of self-compacting concrete in rockfill gaps

Meso-scale simulation of moisture transport in concrete during wet-dry cycles using 3D RBSM conduit model with variable diffusion model

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

Free-Surface Simulations of Newtonian and Non-Newtonian Fluids with the Lattice Boltzmann Method

Research on discrete element simulation of slump test for fresh self-compacting concrete

Numerical modeling of the funnel multiphysical flow of fresh self-compacting concrete considering proportionate heterogeneity of aggregates

A 3D Simulation of a Moving Solid in Viscous Free-Surface Flows by Coupling SPH and DEM

Numerical simulations of fresh concrete flow in the L-Box test using CFD

A Mass-Conserving and Volume-Preserving Lattice Boltzmann Method with Dynamic Grid Refinement for Immiscible Ternary Flows

Lattice Boltzmann Method Simulation of 3-D Melting Using Double MRT Model With Interfacial Tracking Method

Experimental simulations of the pouring of rock-filled concrete