Abstract:Filling ability is one of the prominent rheological properties of the self-compacting concrete (SCC), which has been studied in this research work deploying the functional behavior of the concrete through the studied funnel apparatus using the coupled ANSYS-SPH interface. Seven (7) model cases were studied and optimized. The aim of this numerical study is to propose a more sustainable mix of coarse and fine aggregates proportion that allows for most minimum flow time to enhance a more efficient filling of forms during concreting. The maximum size of the coarse aggregates considered is 20 mm and that of the fine aggregates is below 4 mm. The Bingham model properties for the multiphysics (SPH)-ANSYS models' simulation are; viscosity = 20 ≤ μ ≤ 100 and the yield stress = 50 ≤ τ 0 ≤ 200 , standard flow time, t (s) ranges; 6 ≤ t ≤ 25 and the funnel volume is 12 L. The minimum boundary flow time, which represents the time it takes for the SCC to completely flow through a specified distance, typically measured in seconds was modeled for in the seven (7) model cases. The second case with 40% coarse mixed with 60% fine completely flowed out in 16 s, thus fulfilling the minimum flow time. This minimum flow time was considered alongside other relevant parameters and tests, such as slump flow, passing ability, segregation resistance, and rheological properties (stresses), to comprehensively assess the filling ability of SCC in this model. By considering these factors and the optimized mix (40%C + 60%F:16s), engineers and researchers can optimize the SCC mix design to achieve the desired flowability and filling performance for their specific construction applications. The multiphase optimized mix was further simulated using the coupled interface of the ANSYS-SPH platform operating with the CFX command at air temperature of 25 °C. The results show energy reduction jump at the optimized flow time. Ideally, the mix, 40%C + 60%F:16s has been proposed as the mix with the most efficient flow to achieve the filling ability for sustainable structural concrete construction.

Flow behaviors of self-compacting concrete in rockfill gaps

Compressive Behavior of GFRP Tubes Filled with Self-Compacting Concrete

Lattice Boltzmann-Discrete Element Modeling Simulation of SCC Flowing Process for Rock-Filled Concrete

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Filling Capacity Evaluation of Self-Compacting Concrete in Rock-Filled Concrete.

Experimental simulations of the pouring of rock-filled concrete

Analyzing the Filling Performance Parameters of Self-Compacted Mortar in Rock Filled Concrete

Experimental Study of Filling Capacity of Self-Compacting Concrete and Its Influence on the Properties of Rock-Filled Concrete

Rock-Filled Concrete - Development, investigations and applications

Numerical modeling of the funnel multiphysical flow of fresh self-compacting concrete considering proportionate heterogeneity of aggregates

Experimental study of Self-Compacting Concrete filled prepacked rock

3D Simulation of Self-Compacting Concrete Flow Based on MRT-LBM

EXPERIMENTAL RESEARCH ON MECHANICAL BEHAVIOR OF SELF-COMPACTING ROCK-FILL CONCRETE

Rock-filled concrete, the new norm of SCC in hydraulic engineering in China

A CFD SIMULATION OF SELF-COMPACTING CONCRETE BASED ON HERSCHEL-BULKLEY RHEOLOGICAL MODEL

Numerical Modelling of Flow Performance of Fresh Concrete Considering Rheological Characteristics

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Construction of Concrete-Faced Rockfill Dams with Weak Rocks

Effects of fly ash and limestone powder on the paste rheological thresholds of self-compacting concrete

Experimental Investigation into Mode-I Interfacial Fracture Behavior Between Rock and Self-Compacting Concrete in Rock-Filled Concrete

A Reaction-Diffusion Modeling of Carbonation Process in Self-Compacting Concrete