Abstract:Nanocomposites of poly (3-hydroxybutyrate) (PHB) containing fibrillated cellulose extracted from eucalyptus fibers were prepared and characterized. This study focuses initially on the method to follow the acid treatment of eucalyptus cellulose fibers (ECF) through an experimental design, where the studied parameters were the H 2 SO 4 concentration, hydrolysis time, and reaction temperatures as independent variables for statistical analysis. The thermogravimetric analysis (TGA) of the ECF revealed that mild hydrolysis conditions shifted the degradation temperature of the fibers to higher values. The crystallinity index (CI) obtained by the X-ray diffraction was greater when intermediate hydrolysis conditions (30% H 2 SO 4 , 60 °C, 150 min) were employed. Afterward, the most promising ECFs hydrolyzed according to the experimental design were used to produce nanocomposites of PHB(ECF/PHB) containing 5 wt% of the fiber reinforcement via twin-screw mini extruder Haake MiniLab II operating at 180 °C, and varying the rotation speeds (60, 120, and 180 rpm). The ECF/PHB nanocomposites were characterized by TGA and dynamic mechanical analysis (DMA), through which the selected composites with higher thermal and mechanical properties were analyzed by differential scanning calorimetry (DSC), tensile test, and scanning electron microscopy (SEM). ECF/PHB nanocomposites processed at 120 rpm resulted in a material with improved properties. The DMA storage and loss moduli as well as the tensile elastic modulus increased 65%, 196% and 15%, respectively, as compared to the neat PHB. The SEM of the composites revealed nanowhiskers, microcrystalline and microfibrillated cellulose incorporated into PHB, which were attributed to improvements in the thermal and mechanical properties of the PHB matrix.

Effect of the nano-fibrillation of bamboo pulp on the thermal, structural, mechanical and physical properties of nanocomposites based on starch/poly(vinyl alcohol) blend

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Preparation and characterization of bio-nanocomposite films based on cassava starch or chitosan, reinforced with montmorillonite or bamboo nanofibers

Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement

Nanocellulose reinforced starch biocomposite films via tape-casting technique

Reinforcing and Toughening Effects of Bamboo Pulp Fiber on Poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) Fiber Composites

Investigation of the effects of cellulose nanofiber on the properties of poly(vinyl alcohol) crosslinked by 2,5-furandicarboxylic acid

Nanofibrillated pulps from Amazonian species as a potential raw material for ecological packaging

Effect of Length of Cellulose Nanofibers on Mechanical Reinforcement of Polyvinyl Alcohol

Preparation and Characterization of Cellulose Nanocrystals from Bamboos and Their Application in Cassava Starch-Based Film

Preparation and characterization of bamboo based nanocellulose by ball milling and used as a filler for preparation of nanocomposite

Enhancement of the Physical, Mechanical, and Thermal Properties of Epoxy-based Bamboo Nanofiber Nanocomposites

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder

Effect of acid treatment of eucalyptus fibers for improved poly(3-hydroxybutyrate) nanocomposites