Abstract:A novel double‐salts super concentrated (DSSC) carbonate electrolyte is proposed to enhance LiNi0.90Co0.05Mn0.05O2 (NCM9055) ||Li metal battery performance. A uniform rock‐salt phase protective layer is formed on the cathode. The DSSC electrolyte also can prevent dendrite growth on the Li anode. Moreover, it enhances flame retardance, promoting safer high‐performance Ni‐rich NCM9055||Li metal batteries. Current lithium‐ion batteries cannot meet the requirement of higher energy density with further large‐scale application of electrical vehicles. Lithium metal batteries combined with Ni‐rich layered oxides cathode are expected as the one of promising solutions, while the poor electrode and electrolyte interface impedes the commercial development of lithium metal batteries. A new double‐salts super concentrated (DSSC) carbonate electrolyte is proposed to improve the electrochemical performance of LiNi0.90Co0.05Mn0.05O2 (NCM9055)||Li metal battery which exhibits stable cycling performance with the capacity retention of 93.04% and reversible capacity of 173.8 mAh g−1 after 100 cycles at 1 C, while cells with conventional 1 m diluted electrolyte remains only 60.55% and capacity of 114.2 mAh g−1. The double salts synergistic effect in super concentrated electrolyte promotes the formation for more balanced stable cathode electrolyte interface (CEI) inorganic compounds of CFx, LiNOx, SOF2, Li2SO4, and less LiF by X‐ray photoelectron spectroscopy (XPS) test, and the uniform 2–3 nm rock‐salt phase protection layer on the cathode surface by transmission electron microscope (TEM) characterization, improving the cycling performance of the Ni‐rich NCM9055 layered oxide cathode. The DSSC electrolyte also can relief the Li dendrite growth on Li metal anode, as well as exhibit better flame retardance, promoting the application of more safety Ni‐rich NCM9055||Li metal batteries.

An electrolyte to improve the deep charge–discharge performance of LiNi0.8Co0.15Al0.05O2 cathode

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Fluorinated Thiophene-Based Electrolyte Additives Enable a Robust Cathode Electrolyte Interphase with Conformal Homogeneity for a High-Voltage LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathode

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Promotion of Li + desolvation and efficient cathode interphase formation by 4-aminobenzoic multifunctional electrolyte additive

Double‐Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni‐Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries

Improved interfacial properties of LiNi0.8Co0.15Al0.05O2 cathode by tris(trimethylsilyl) borate as an electrolyte additive to inhibit HF formation

Conversion of residual lithium into fast lithium ion conductor coating to achieve high cycle life LiNi0.8Co0.15Al0.05O2 cathode for lithium ion battery

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Cycling stability of LiNi0.80Co0.15Al0.05O2 cathode modified by solid-state electrolyte film

Enabling superior electrochemical performance of NCA cathode in Li5.5PS4.5Cl1.5-based solid-state batteries with a dual-electrolyte layer

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating

In-situ construction of hierarchical cathode electrolyte interphase for high performance LiNi0.8Co0.1Mn0.1O2/Li metal battery

Boosting Cell Performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 via Surface Structure Design.

One-step bulk and surface co-modification of LiNi0.8Co0.15Al0.05O2 cathode material towards excellent long-term cyclability

Boosting cyclability performance of the LiNi0.8Co0.15Al0.05O2 cathode by a polyacrylonitrile-induced conductive carbon surface coating

Self-repaired Cathode Electrolyte Interphase to Stabilize the High-Nickel Cathode Interface by a Sustained-Release Multifunctional Electrolyte Additive

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Methylboronic acid MIDA ester (ADM) as an effective additive in electrolyte to improve cathode electrolyte interlayer performance of LiNi0.8Co0.15Al0.05O2 electrode