Abstract:Vehicle weight and alternative materials development like aluminum alloys and magnesium alloys are hot issues around the world in the automobile industry. Therefore, in the present study, the structure analysis of the rear suspension 5‐links made by aluminum alloys (A356) with a tensile strength of 245 MPa, was performed using computer aided engineering to investigate the lightweight design process from the reference of the rear suspension 5‐links which was made by the steel materials and was already proven in the commercial market. Especially the simulated maximum von Mises stresses after strength analysis were normalized as the fatigue limit and were converted to the weight ratios of the same type as the fatigue safety factor suggested and referred to as such in this study. From these, it was suggested that the fatigue properties could be simply predicted only from this static computer aided engineering simulation. The weight reduction could be achieved when comparing steel and aluminum alloy models. It was a useful method to satisfy the fatigue safe design by using simple static analysis and weight factors. Das Fahrzeuggewicht und die Entwicklung alternativer Werkstoffe wie Aluminiumlegierungen und Magnesiumlegierungen sind in der Automobilindustrie weltweit von großer Bedeutung. Daher wurde in der vorliegenden Studie die Strukturanalyse der Hinterradaufhängung mit 5 Verbindungen aus Aluminiumlegierungen (A356) mit einer Zugfestigkeit von 245 MPa unter Verwendung rechnerunterstützter Entwicklungsverfahren durchgeführt, um den Leichtbaudesignprozess der Referenzkonfiguration einer Hinterradaufhängungsverbindung, die aus einem Stahlwerkstoff hergestellt wurde und sich bereits kommerziell bewährt hat, zu untersuchen. Insbesondere die simulierten maximalen von Mises‐Spannungen nach der Festigkeitsanalyse werden als Ermüdungsgrenze normalisiert und bei Beachtung der Gewichtsverhältnisse des gleichen Typs wie z. B. dem Ermüdungssicherheitsfaktor umgewandelt. Es wird vorgeschlagen, dass die Ermüdungseigenschaften nur aus der statischen rechnergestützten Simulation vorhergesagt werden. Eine Gewichtsreduzierung konnte beim Vergleich von Stahl‐ und Aluminiumlegierungsmodellen erreicht werden. Das Verfahren hat sich als nützlich erwiesen, um ein ermüdungsfreies Design durch einfache statische Analyse und Gewichtsfaktoren zu erzielen.

Static load simulation of steering knuckle for a formula student race car

STRESS ANALYSIS ON STEERING KNUCKLE OF THE AUTOMOBILE STEERING SYSTEM

Static Analysis of Aluminum 6063 Alloy for Steering Knuckle Application in Student Formula Car

Experimental Evaluation of Flexible Fixture Stiffness for Steering Knuckles When Loading a Milling Machine Tool

Structure Optimization of Semi-Solid Die Cast Steering Knuckle and its Experiment Verification

Study on failure assessment and experimental validation of automotive steering knuckle in McPherson front suspension system

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

Finite Element Analysis and weight Optimization of Knuckle joint for different materials by using CAE Tools

Kinematic and Structural Analysis of Independent type suspension system with Anti-Roll bar for Formula Student Vehicle

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

Uniaxial Load Specification for Vehicle Knuckle Part Using Maximum Stress Similarity in Triaxial Load Case

STRESS ANALYSIS OF SUSPENSION BRACKETS ON A 12-METER ELECTRIC BUS USING THE FINITE ELEMENT METHOD

IMPLEMENTATION OF THE FINITE ELEMENT METHOD IN SOLIDWORKS TO OPTIMIZE THE FRONT CAST WHEEL DESIGN FOR MOTORCYCLES

A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars

Research and Application of Precision Forging Forming Process for Flat Thin Flash of Automobile Disc Steering Knuckle

Fatigue safety design of automotive suspension links by using computer aided engineering static analysis

A Study of Statics on Driyarkara Electric Automobile Chassis Prototype

Safety simulation and tests of automotive steering mechanism

FEM analysis of the extrusion-forging compound process for knuckle of Benz heavy truck

Optimization Design and Virtual Prototype Modeling and Simulation Analysis of FSAE Car Steering Trapezium