Abstract:In this study, propylamine and ethylenediamine intercalated α-ZrP nanocomposites (denoted by P-α-ZrP and E-α-ZrP, respectively) were synthesized. The effects of propylamine and ethylenediamine intercalated α-ZrP nanocomposites and their reinforcements on the corrosion resistance and mechanical properties of Ni-B coatings were investigated and compared. The morphology and structure of the three composites were characterized using transmission electron microscopy, atomic force microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, infrared spectroscopy, thermogravimetric analysis, and particle size analysis. Both propylamine and ethylenediamine intercalation increase the layer spacing of α-ZrP, but do not change the lamellar structure of α-ZrP. The EIS test results show that both Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings have significantly lower corrosion rates than Ni-B and Ni-B/α-ZrP composite coatings. Compared to Ni-B/α-ZrP, the corrosion rates are reduced by 32 % and 76 % respectively. The R ct values for Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings are also distinctly higher than Ni-B/α-ZrP, with Ni-B/E-α-ZrP having the highest values. In addition, Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings are both harder than Ni-B/α-ZrP and have lower average coefficients of friction and wear rates than Ni-B/α-aZrP. Among them, the Ni-B/E-α-ZrP composite coating has the highest microhardness (1163.64 ± 21.20 HV) and the best wear resistance. The wear rate is reduced by 87 % and 65 % compared to Ni-B and Ni-B/α-ZrP composite coatings respectively. In conclusion, both P-α-ZrP and E-α-ZrP are better than α-ZrP in terms of enhancement, with E-α-ZrP being the best.

Synthesis and Tribological Performance of Different Particle-Sized Nickel-Ion-Exchanged α-Zirconium Phosphates

Hydrothermal synthesis of copper zirconium phosphate hydrate [Cu(OH)2Zr(HPO4)2·2H2O] and an investigation of its lubrication properties in grease.

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

Tribological Properties and Lubrication Mechanism of Nickel Nanoparticles as an Additive in Lithium Grease

Influence of ZrO2 Nanoparticle As Additive on Tribological Property of Lithium Grease

Ionothermal Synthesis Of Layered Zirconium Phosphates And Their Tribological Properties In Mineral Oil

Tribological performance study of zirconium phosphate as an additive in titanium complex grease

Investigation of the Tribological Properties of Two Different Layered Sodium Silicates Utilized As Solid Lubrication Additives in Lithium Grease

Effectively improving the extreme-pressure capacity of a class of intercalated zirconium phosphate materials

Preparation, characterization and tribological application of nickel nanopieces

Strengthening effect of α-ZrP nanosheet inclusions on corrosion resistance and wear resistance of Ni P deposits

Tribological Investigation of Layered Sodium Silicate As Lubricant Additives Prepared by Freezing Titration Ion Exchange

Effects of propylamine and ethylenediamine intercalation of α-ZrP on the corrosion resistance and tribological properties of electroless Ni-B coatings

Improved Tribological Performance of Amorphous Carbon (a-C) Coating by ZrO2 Nanoparticles

Preparation of Diisooctyl Phosphate‐Modified Ultra‐Small Zinc Oxide Nanoparticle and Investigation of Its Tribological Properties as Additive in Alkylnaphthalene

Tribological Behavior of NiAl-Layered Double Hydroxide Nanoplatelets As Oil-Based Lubricant Additives.

Improvement of tribological properties of water‐based ZnO nanoparticles lubricant for zirconium alloy cold rolling by hydroxyethyl cellulose

Synthesis of ultrathin two-dimensional metal-organic framework nanosheets for lubricant additives

Study on Tribological Behavior of Zinc Phosphate Impregnated Graphite Under Oil Lubrication Condition

Tribological Properties of Nano-Scale Al2O3 Particles with Different Shapes as Lubricating Oil Additives

Tribological behavior and mechanism of surface-modified mullite as polyurea grease additive