Abstract:The shift of the industrial focus from fuel to chemicals have urged the researchers to obtain a suitable petrochemical feedstock for the FCC unit. Currently, the slurry phase hydroprocessing is a boon for industrialists to upgrade the crude oil using dispersed catalysts. This hydroprocessed crude oil obtained from slurry phase reaction prevents the FCC catalyst unit from getting rapidly poisoned as most of the impurities is removed from the crude oil such as asphaltenes, resins, heavy metal, sulfur etc. This study puts forward the influence of reaction temperature and time on the hydroprocessing of the crude oil. First, the screening of three separate forms of unsupported trimetallic NiMoW catalysts i.e., as-synthesized (CAT1), sulfided (CAT2), and oil-soluble sulfided (CAT3) at 420 °C and 120 bar of hydrogen pressure has been performed. After screening out the best catalyst (CAT3) based on greater conversion results of heavier hydrocarbon fractions to lighter hydrocarbon fractions, further a detailed experimental study for the hydroprocessing of crude oil under hydrogen pressure (120 bar) with varying reaction temperatures (410, 420, 430 °C) and time period (3, 4 and 5 hours) has been carried. With the rise in temperature from 410 to 430 °C, although the higher conversion of heavier fractions is obtained but the increased amount in the coke weight % restricts the use of very high temperatures for slurry hydroprocessing of crude oil. At 420 °C and 120 bar H 2 pressure, CAT1 catalyst shows a reduction in heavy vacuum gas oil (>450 °C) from 20.05 wt% to 11.1 wt%, and rise in middle distillate from 37.02 wt% to 50.4 wt%. When CAT2 catalyst is employed, a decrease in heavy VGO from 20.05 wt% to 9.3 wt% was observed with an increase in the middle distillates from 37.02 wt% to 52.1 wt%. CAT3 catalyst leads to maximum reduction in heavy VGO from 20.05 wt% to 7.1 wt% with an increase in the middle distillates from 37.02 wt% to 55.2 wt%, which shows the importance of oil-soluble catalyst to obtain better quality petro FCC feed. The kinetic study has also been performed for a better understanding of the reaction pathway. Based on the kinetic study, the activation energy associated with each hydrocarbon fraction has been determined and presented in the work. Such detailed study covering all these valuable parameters along with kinetic study has not been presented till now which is the novelty of our work also.

Catalytic Cracking of Light Crude Oil to Light Olefins and Naphtha over E-Cat and MFI: Microactivity Test versus Advanced Cracking Evaluation and the Effect of High Reaction Temperature

Conversion of Arabian Light Crude Oil to Light Olefins via Catalytic and Thermal Cracking

Catalytic cracking of crude oil to light olefins and naphtha: Experimental and kinetic modeling

Catalytic Cracking of Arab Super Light Crude Oil to Light Olefins: An Experimental and Kinetic Study

Efficient processing of crude oil using direct cracking at high temperatures over modified FCC catalysts

Catalytic Cracking of Light Crude Oil: Effect of Feed Mixing with Liquid Hydrocarbon Fractions

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

Catalytic Cracking of Crude Oil: Mini Review of Catalyst Formulations for Enhanced Selectivity to Light Olefins

Catalytic cracking of heavy atmospheric gas oil to light olefins over ZSM-5 zeolite: Effect of crystal size in the absence/presence of steam

Cracking Performance and Feed Characterization Study of Catalytic Pyrolysis for Light Olefin Production

Catalytic Cracking of n-Dodecane to Chemicals: Effect of Variable-Morphological ZSM-5 Zeolites Synthesized Using Various Silica Sources

Role of Catalyst in Optimizing Fluid Catalytic Cracking Performance During Cracking of H-Oil-Derived Gas Oils

Steam catalytic cracking and lump kinetics of naphtha to light olefins over nanocrystalline ZSM-5 zeolite

Cracking Performance of Gasoline and Diesel Fractions from Catalytic Pyrolysis of Heavy Gas Oil Derived from Canadian Synthetic Crude Oil

Heat Transfer Study on Hydrocracking of Paraffin Wax over Microfiber-Wrapped Catalyst

An inclusive experimental and kinetic understanding of the slurry phase hydroprocessing of crude oil with an active dispersed catalyst to obtain refined fuel

Catalytic cracking of tar component from high-temperature fuel gas

The Impact of Support and Reduction Temperature on the Catalytic Activity of Bimetallic Nickel-Zirconium Catalysts in the Hydrocracking Reaction of Algal Oil from Spirulina Platensis

Maximization production of light olefins from dual-stage catalytic dehydrogenation cracking of crude oil: Catalysis mechanism and pilot trial

Influence Of Catalyst Type And Regeneration On Upgrading Of Crude Bio-Oil Through Catalytically Thermal Cracking