Abstract:Structural health monitoring (SHM) is important in ensuring safety of large civil engineering structures. Global Navigation Satellite Systems (GNSS)-based technology has been commonly used in SHM systems due to its unique ability to obtain real-time 3D displacement information. GNSS-based SHM systems are often integrated with other sensors (e.g., accelerometers) to take advantage of the complementary natures of different technologies and to enhance the overall performance of the integrated systems (e.g., more accurate displacement information). The conventional multi-rate Kalman filter (conventional MRKF) has been frequently used to integrate data from different technologies as the data sampling rate of a GNSS system is usually much lower than that of most other sensors. It is, however, well known that GNSS observations often contain outliers that can significantly reduce the accuracy and reliability of either the GNSS-only or integrated SHM systems. We propose a new robust multi-rate Kalman filter-based approach to integrate observations from GNSS and other sensors more robustly. The approach allows for the first time to mitigate the influence of outliers in the observations of an integrated GNSS and accelerometer SHM system, especially those in the GNSS observations in a real-time mode, which is critically important for an SHM system. Extensive experiments with data from a shaking table and from Stonecutters Bridge, a large cable-stayed bridge in Hong Kong, captured during a strong typhoon have demonstrated that the proposed method can reduce the effects of outliers effectively. The shaking table test has shown that when the method was used with an integrated GNSS and accelerometer system and outliers were present in the observations, the overall accuracy of the system was increased by up to about 70% compared with a GNSS-only system and up to about 44% higher compared to the same integrated system, but the data were processed with the conventional MRKF. It should be noted that the improvements depend on the number and magnitudes of the outliers in the observations. From the frequency perspective, the new method can capture a much broader band and more accurate vibration frequency.

Interactive multiple-model vertical vibration detection of structures based on high-frequency GNSS observations

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

GNSS/accelerometer Robust Monitoring Model for Dynamic Displacement of Structures and Buildings

Model-free Identification of Multiple Periodic Excitations and Detection of Structural Anomaly Using Noisy Response Measurements

Real-time outlier detection in integrated GNSS and accelerometer structural health monitoring systems based on a robust multi-rate Kalman filter

Detection of Structural Vibration with High-Rate Precise Point Positioning: Case Study Results Based on 100 Hz Multi-GNSS Observables and Shake-Table Simulation

Correction of Misalignment Errors in the Integrated GNSS and Accelerometer System for Structural Displacement Monitoring

Real-Time Dynamic Monitoring and Modeling for Large Building Based on GNSS

Multi-route fusion method of GNSS and accelerometer for structural health monitoring

High-rate bridge displacement monitoring with low-rate virtual reference station data

Experimental Study of Accuracy of High-Rate GNSS in Context of Structural Health Monitoring

Multi-Antenna Global Navigation Satellite System/Inertial Measurement Unit Tight Integration for Measuring Displacement and Vibration in Structural Health Monitoring

Vision-Based Moving Mass Detection by Time-Varying Structure Vibration Monitoring

An Integrated GNSS/MEMS Accelerometer System for Dynamic Structural Response Monitoring under Thunder Loading

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Evaluation of the single-frequency variometric approach based on low-cost GNSS observations and different satellite combinations for detecting short-term dynamic behaviors

A multimodal natural frequency identification method of long-span bridges using GNSS

GNSS Aided Long-Range 3D Displacement Sensing for High-Rise Structures with Two Non-Overlapping Cameras

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm